MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Tandridge home — scaled plans and elevations ready for submission
Tandridge · Planning Application Drawings & Submission

Planning application drawings in Tandridge

The full drawing set for a Tandridge application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Tandridge District Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Tandridge householder planning by the numbers

Tandridge District Council granted 87% of the householder planning decisions it made in its latest published year — level with the 87% England-wide householder average. Metropolitan Green Belt covers around 94% of the district, one of the highest proportions in England, so the presumption against inappropriate development dominates decisions, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901), Edwardian (1901–1910), interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Tandridge carries at least one Article 4 direction, and conservation areas including Oxted, Limpsfield and Godstone remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Tandridge is determined against an 8-week statutory target.

Oxted (the principal town with railway-era Victorian and Edwardian housing, twentieth-century growth and a conservation area), Caterham (the district's largest settlement, dense Victorian-to-postwar housing across Caterham-on-the-Hill and the Valley), Warlingham (a hilltop commuter village of largely interwar and postwar detached houses and semis), Godstone (a historic green-belt village around a pond and green with a conservation area), Limpsfield (an affluent AONB-edge village of period and large detached stock with a conservation area) and Lingfield (a historic rural village with a medieval core and a conservation area) — these are the Tandridge pockets our drawings cover most. Heritage designations here include Oxted, Limpsfield, Godstone, Bletchingley, Lingfield and Chaldon. Tandridge District Council weighs each proposal against the Tandridge District Core Strategy (adopted 2008) and Local Plan Part 2: Detailed Policies (adopted July 2014), where the Surrey Hills and High Weald National Landscapes (AONBs) affect the district around Limpsfield, Oxted and the south, adding national landscape protection. Converted flats appear around Oxted and Caterham, and none of them hold householder permitted-development rights.. On roofs the borough is dual-pitch tiled roofs on the railway-era terraces and villas and hipped roofs on the interwar and postwar semis, over Victorian and Edwardian and interwar railway-era housing in Oxted and Caterham, postwar suburban semis and detached houses, large detached houses on generous plots at Woldingham and Limpsfield and historic vernacular cottages in the green-belt villages of Godstone, Bletchingley and Lingfield.

What goes in a Tandridge planning application

Whatever you are building, Tandridge District Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Tandridge District Council assesses each proposal against the Tandridge District Core Strategy (adopted 2008) and Local Plan Part 2: Detailed Policies (adopted July 2014), and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Tandridge's stock, which runs to Victorian and Edwardian and interwar railway-era housing in Oxted and Caterham, postwar suburban semis and detached houses, large detached houses on generous plots at Woldingham and Limpsfield and historic vernacular cottages in the green-belt villages of Godstone, Bletchingley and Lingfield, the same scheme is drawn differently to answer the concerns officers raise here. Metropolitan Green Belt covers around 94% of the district, one of the highest proportions in England, so the presumption against inappropriate development dominates decisions, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Oxted, Limpsfield, Godstone, Bletchingley, Lingfield and Chaldon among Tandridge's — validation is stricter still, often demanding heritage detail and sometimes additional plans. Tandridge has Article 4 directions removing permitted-development rights in parts of the district, which owners can check against the council's constraints map before assuming suburban PD rights, and its conservation areas such as Oxted, Limpsfield and Godstone add further character controls. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Tandridge application

What drawings do I need for a planning application in Tandridge?

Tandridge District Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Tandridge District Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Tandridge operates several, which can change what is needed

Tandridge planning decisions — live from council data

Below is Tandridge District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Tandridge grants a fair share of applications broadly in line with the national picture, with overwhelming Green Belt coverage and AONB protection the pressures on anything beyond modest householder work. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

90%householder applications approved in Tandridge
87%national average — Tandridge is 3 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Tandridge applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Tandridge District Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Tandridge applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The Surrey Hills and High Weald National Landscapes (AONBs) affect the district around Limpsfield, Oxted and the south, adding national landscape protection. Across Oxted, Caterham and Warlingham the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Tandridge planning application

Applications we draw across Tandridge

The application pack is the same discipline whatever the project. A few of the Tandridge neighbourhoods and property types we prepare drawings for most often:

Oxted

Planning drawings for Oxted's the principal town with railway-era Victorian and Edwardian housing, twentieth-century growth and a conservation area — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Caterham

Planning drawings for Caterham's the district's largest settlement, dense Victorian-to-postwar housing across Caterham-on-the-Hill and the Valley — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Warlingham

Planning drawings for Warlingham's a hilltop commuter village of largely interwar and postwar detached houses and semis — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Godstone

Planning drawings for Godstone's a historic green-belt village around a pond and green with a conservation area — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Limpsfield

Planning drawings for Limpsfield's an affluent AONB-edge village of period and large detached stock with a conservation area — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Lingfield

Planning drawings for Lingfield's a historic rural village with a medieval core and a conservation area — scaled, validation-ready and drawn to Tandridge District Council's guidance.

Which application do I make in Tandridge?

The route decides what Tandridge District Council needs and how long it takes. This is how the common Tandridge routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Oxted and Limpsfield, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Tandridge application

A fixed process built around how Tandridge District Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Tandridge postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Tandridge District Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Tandridge District Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Tandridge District Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Tandridge?

Tandridge District Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed.

Why do Tandridge planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Tandridge District Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return.

Can you submit the Tandridge planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Tandridge District Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself.

How long does Tandridge District Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Tandridge District Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes.

Do I need planning drawings if my project is permitted development in Tandridge?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Tandridge District Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Oxted and Limpsfield, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit.

How much do planning application drawings in Tandridge cost?

We price each Tandridge job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Tandridge District Council decides. The Tandridge District Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across London's Outskirts

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Tandridge