MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Reigate & Banstead home — scaled plans and elevations ready for submission
Reigate & Banstead · Planning Application Drawings & Submission

Planning application drawings in Reigate & Banstead

The full drawing set for a Reigate & Banstead application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Reigate & Banstead Borough Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

What the data says about planning in Reigate & Banstead

Reigate & Banstead Borough Council granted 87% of the householder planning decisions it made in its latest published year — level with the 87% England-wide householder average. A double landscape constraint applies in the south, combining Metropolitan Green Belt with the Surrey Hills Area of Outstanding Natural Beauty, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901), Edwardian (1901–1910), interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.

Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Reigate & Banstead Borough Council needs a full application. Reigate & Banstead carries at least one Article 4 direction, and conservation areas including Reigate, Redhill and Banstead Village remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Reigate & Banstead is determined against an 8-week statutory target.

Reigate (historic market town with Victorian and Edwardian conservation cores), Redhill (a Victorian railway-junction town with postwar and new-build regeneration), Banstead (low-density 1930s interwar semis around a village core), Horley (a southern town of postwar and ongoing new-build estates), Merstham (Victorian terraces alongside the postwar New Merstham estates) and Nutfield (a rural village in the Green Belt and Surrey Hills setting) — these are the Reigate & Banstead pockets our drawings cover most. Heritage designations here include Reigate, Redhill, Banstead Village, Reigate Heath, Nutfield and Merstham. Reigate & Banstead Borough Council weighs each proposal against the Reigate & Banstead Core Strategy (adopted 2014) and Development Management Plan (adopted 2019), where the 2019 Development Management Plan released nine Green Belt sites as sustainable urban extensions for around 845 homes, a notable managed release. Flats are a meaningful share of stock in the Redhill and Reigate town centres and at Merstham, and converted flats hold no householder permitted-development rights.. On roofs the borough is pitched clay and concrete-tile gabled and hipped roofs on the interwar semis and steeper tiled roofs on the Victorian mansions of Reigate Hill and Wray Common, over Victorian and Edwardian streets in Reigate and around Redhill's railway junction, abundant low-density 1930s interwar semis in Banstead, postwar and modern estate housing in Redhill, Horley and Merstham and village vernacular in the rural Green Belt and Surrey Hills settlements.

What goes in a Reigate & Banstead planning application

Whatever you are building, Reigate & Banstead Borough Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Reigate & Banstead Borough Council assesses each proposal against the Reigate & Banstead Core Strategy (adopted 2014) and Development Management Plan (adopted 2019), and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Reigate & Banstead's stock, which runs to Victorian and Edwardian streets in Reigate and around Redhill's railway junction, abundant low-density 1930s interwar semis in Banstead, postwar and modern estate housing in Redhill, Horley and Merstham and village vernacular in the rural Green Belt and Surrey Hills settlements, the same scheme is drawn differently to answer the concerns officers raise here. A double landscape constraint applies in the south, combining Metropolitan Green Belt with the Surrey Hills Area of Outstanding Natural Beauty, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Reigate, Redhill, Banstead Village, Reigate Heath, Nutfield and Merstham among Reigate & Banstead's — validation is stricter still, often demanding heritage detail and sometimes additional plans. An Article 4 direction in force from February 2026 removes the permitted right to change ground-floor commercial units to residential across the borough's town and local centres, protecting retail and services frontages. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Reigate & Banstead application

What drawings do I need for a planning application in Reigate & Banstead?

Reigate & Banstead Borough Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Reigate & Banstead Borough Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Reigate & Banstead operates several, which can change what is needed

Reigate & Banstead planning decisions — live from council data

Below is Reigate & Banstead Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Reigate & Banstead grants a fair share of householder applications broadly at the national norm, higher than the most heavily green-belted Surrey neighbours, with the AONB and Green Belt the main constraints in the south. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

93%householder applications approved in Reigate and Banstead
87%national average — Reigate and Banstead is 6 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Reigate & Banstead applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Reigate & Banstead Borough Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Reigate & Banstead applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 2019 Development Management Plan released nine Green Belt sites as sustainable urban extensions for around 845 homes, a notable managed release. Across Reigate, Redhill and Banstead the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Reigate & Banstead planning application

Applications we draw across Reigate & Banstead

The application pack is the same discipline whatever the project. A few of the Reigate & Banstead neighbourhoods and property types we prepare drawings for most often:

Reigate

Planning drawings for Reigate's historic market town with Victorian and Edwardian conservation cores — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Redhill

Planning drawings for Redhill's a Victorian railway-junction town with postwar and new-build regeneration — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Banstead

Planning drawings for Banstead's low-density 1930s interwar semis around a village core — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Horley

Planning drawings for Horley's a southern town of postwar and ongoing new-build estates — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Merstham

Planning drawings for Merstham's Victorian terraces alongside the postwar New Merstham estates — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Nutfield

Planning drawings for Nutfield's a rural village in the Green Belt and Surrey Hills setting — scaled, validation-ready and drawn to Reigate & Banstead Borough Council's guidance.

Which application do I make in Reigate & Banstead?

The route decides what Reigate & Banstead Borough Council needs and how long it takes. This is how the common Reigate & Banstead routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Reigate and Redhill, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Reigate & Banstead application

A fixed process built around how Reigate & Banstead Borough Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Reigate & Banstead postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Reigate & Banstead Borough Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Reigate & Banstead Borough Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Reigate & Banstead Borough Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Reigate & Banstead?

Reigate & Banstead Borough Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed.

Why do Reigate & Banstead planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Reigate & Banstead Borough Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return.

Can you submit the Reigate & Banstead planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Reigate & Banstead Borough Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself.

How long does Reigate & Banstead Borough Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Reigate & Banstead Borough Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes.

Do I need planning drawings if my project is permitted development in Reigate & Banstead?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Reigate & Banstead Borough Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Reigate and Redhill, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit.

How much do planning application drawings in Reigate & Banstead cost?

We price each Reigate & Banstead job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Reigate & Banstead Borough Council decides. The Reigate & Banstead Borough Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across London's Outskirts

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Reigate & Banstead