
Drawings for going down instead of out — a new floor dug beneath your Hammersmith and Fulham house, underpinned and tanked, detailed with the structural method statement and drainage strategy Hammersmith & Fulham Council and building control both need, delivered as a coordinated set and revised free until approved, with a free feasibility check first.
Hammersmith & Fulham Council granted 87% of the householder planning decisions it made in its latest published year — level with the 87% England-wide householder average. Basement schemes require a detailed basement impact assessment covering ground stability, flooding and construction management, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and Edwardian (1901–1910) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Hammersmith and Fulham carries at least one Article 4 direction, and conservation areas including Brackenbury, Bradmore and Peterborough Estate remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Hammersmith and Fulham is determined against an 8-week statutory target.
Hammersmith (Victorian terraces around the Brackenbury village grid), Fulham (the Peterborough Estate 'Lion' houses and Hurlingham mansion flats), Shepherd's Bush (dense Victorian terraces, much of it split into flats), Brook Green (Edwardian terraces interspersed with mansion blocks), Parsons Green (Victorian terraces gathered around the green) and Sands End (former industrial land now mixing terraces with new housing) — these are the Hammersmith and Fulham pockets our drawings cover most. Heritage designations here include Brackenbury, Bradmore, Peterborough Estate, Ravenscourt and Wendell Park. Hammersmith & Fulham Council weighs each proposal against Hammersmith and Fulham Local Plan and the Planning Guidance SPD, where with terraces packed tightly, mansard and side-return proposals turn on protecting a consistent roofline and rear amenity. Converted flats dominate large parts of Shepherd's Bush and Fulham, and none carry householder permitted-development rights.. On roofs the borough is London butterfly roofs concealed behind the terrace parapets and back-addition closet-wing roofs that shape side-return schemes, over Victorian and Edwardian terraces, purpose-built mansion flats and converted period flats.
When a Hammersmith and Fulham house cannot grow outward — no garden to lose, a footprint already at its limit — the only direction left is down. The tall Victorian and Edwardian terraces, purpose-built mansion flats and converted period flats that fill the borough sit on foundations shallow enough to underpin, and a dug-down lower ground floor buys a whole storey of living space beneath the existing house without changing the street at all. The value is real; so is the engineering, and Hammersmith & Fulham Council treats a basement as a major structural intervention rather than a simple conversion.
The drawings carry more weight than any other project because the ground itself is the risk. The existing walls are underpinned in sequence so the house is never left unsupported; a new retaining structure holds back the surrounding soil; the slab and walls are tanked — usually a Type C cavity-drain system with a sump and pump — because a basement is below the water table for part of the year. Basement schemes require a detailed basement impact assessment covering ground stability, flooding and construction management, exactly the kind of constraint a basement scheme has to answer before Hammersmith & Fulham Council will validate it.
Many of Hammersmith and Fulham's basements sit under listed or conservation-area houses — Brackenbury, Bradmore, Peterborough Estate, Ravenscourt and Wendell Park among them — where a front lightwell, a rooflight in the pavement vault or any change to the historic fabric is scrutinised closely. Conservation areas blanket much of the borough — Brackenbury, Bradmore and the Fulham Peterborough Estate among them — and Article 4 directions there remove permitted-development rights on frontages and roofs. We establish the designation and the borough's basement policy before a single line is drawn.

Most basements in Hammersmith and Fulham need a full planning application to Hammersmith & Fulham Council, and almost always the supporting technical documents too. Expect to apply where any of these apply — which is nearly every dig-down:
We produce the planning drawings, the structural scheme with its method statement, the waterproofing and drainage strategy and the party-wall information as a single coordinated package for Hammersmith & Fulham Council and building control, so the engineer, the council and the neighbour are all reading the same set — the way a basement stays on programme.
Below is Hammersmith & Fulham Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Hammersmith and Fulham grants a high share of householder applications, though tight terrace density and basement engineering are the constraints that shape most designs. Basements are decided on the strength of their technical case — a complete Basement Impact Assessment and method statement move a scheme through validation and committee far faster than a bare application.
Source: MHCLG planning application statistics (householder decisions, rolling year). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
A basement is won twice — once at planning and once at building control — and both hang on the technical set. Hammersmith & Fulham Council's planners weigh the impact on neighbours, on groundwater and on the character of the street, so the application leads with a Basement Impact Assessment and, where the policy asks, a construction management plan. Building control and the warranty provider then check the underpinning sequence, the retaining design, the waterproofing to the current standard and the means of escape from a habitable room below ground. Across Hammersmith, Fulham and Shepherd's Bush these are the details that decide whether a basement is a clean approval or a year of conditions.
With terraces packed tightly, mansard and side-return proposals turn on protecting a consistent roofline and rear amenity. Because you are excavating within a few metres of a neighbour's wall, the Party Wall etc. Act almost always applies, and we set the drawings up so the party-wall surveyor, the structural engineer and the waterproofing designer are all working to one agreed section — the coordination that keeps a Hammersmith and Fulham basement out of dispute and on programme.

We draw dig-downs and cellar conversions under the tall period houses across the borough. A few of the Hammersmith and Fulham neighbourhoods where basements come up most often:
Basement conversion drawings for Hammersmith's Victorian terraces around the Brackenbury village grid — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
Basement conversion drawings for Fulham's the Peterborough Estate 'Lion' houses and Hurlingham mansion flats — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
Basement conversion drawings for Shepherd's Bush's dense Victorian terraces, much of it split into flats — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
Basement conversion drawings for Brook Green's Edwardian terraces interspersed with mansion blocks — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
Basement conversion drawings for Parsons Green's Victorian terraces gathered around the green — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
Basement conversion drawings for Sands End's former industrial land now mixing terraces with new housing — underpinning-sequenced, tanked and drawn with the structural and drainage set Hammersmith & Fulham Council needs.
A basement is the most document-heavy project a house can have. This is what each part of the set does and who checks it.
| Element | What it covers | Why it matters | Checked by |
|---|---|---|---|
| Underpinning | Deepening the existing foundations in a sequence | Keeps the house supported while you dig beneath it | Structural engineer / building control |
| Retaining & waterproofing | New retaining walls and Type C cavity drainage | Holds back the soil and keeps the room dry below the water table | Building control / warranty |
| Basement Impact Assessment | Groundwater, structure and neighbour impact | Required by Hammersmith & Fulham Council's basement policy for planning | Planning |
| Party wall | Notices and award where you dig near a boundary | The legal route to excavate beside a neighbour's wall | Party-wall surveyors |
Under a listed or conservation-area house — such as in Brackenbury and Bradmore — a front lightwell or vault alteration adds a further layer of consent to the basement application.
A staged process built around the technical case a basement lives or dies on — feasibility first, so you never commit to a dig that the ground or the policy will not allow.
Send us your Hammersmith and Fulham postcode and what you want below ground. We check Hammersmith & Fulham Council's basement policy, conservation and listed status, and the likely ground and groundwater constraints before you spend on design.
We survey the house, establish existing foundation depths and levels, and coordinate the structural engineer so the underpinning and retaining scheme is built on real dimensions, not assumptions.
We produce the planning drawings with the Basement Impact Assessment and construction management plan, plus the structural method statement and waterproofing strategy, as one coordinated package for Hammersmith & Fulham Council.
We submit to Hammersmith & Fulham Council, answer planning and building-control queries, dovetail the party-wall process, and revise the set free until the basement is approved and signed off.
Nearly always. Excavating to create new space, deepening a cellar or forming a lightwell goes beyond permitted development, and most inner-London boroughs — Hammersmith & Fulham Council included — run a specific basement or subterranean-development policy. A full planning application is the norm, usually supported by a Basement Impact Assessment. We confirm the exact policy route for your Hammersmith and Fulham address before any drawing starts.
A Basement Impact Assessment is a technical report on how the dig affects groundwater, drainage, structure and neighbouring buildings, and most Hammersmith and Fulham basement schemes need one to satisfy Hammersmith & Fulham Council's policy. It is the document planners lean on most, because it shows the excavation has been thought through rather than assumed. We coordinate it with the structural design so the two tell the same story.
Almost certainly. A basement means excavating close to — and often underpinning beneath — a neighbour's wall, which triggers the Party Wall etc. Act 1996. You must serve notice on the adjoining owners and usually reach a party-wall award before you dig. We set the drawings up so the party-wall surveyor works from the same sections as the engineer, which keeps a Hammersmith and Fulham basement out of dispute. Hammersmith & Fulham Council is the decision-maker.
A basement sits below ground and, for part of the year, below the water table, so it is designed to be watertight rather than merely damp-proofed. The usual approach is a Type C cavity-drain system that collects any water behind the walls and floor and takes it to a sump and pump. We draw the waterproofing to the current British Standard and coordinate it with the structure, because in a Hammersmith and Fulham basement the tanking and the retaining wall have to work as one. Hammersmith & Fulham Council is the decision-maker.
Sometimes, but it is harder. A listed house — or one in a conservation area such as Brackenbury and Bradmore — needs listed building consent for any work affecting its fabric, and Hammersmith & Fulham Council scrutinises lightwells, vault alterations and the effect on the historic structure closely. It can be done where the scheme protects what matters, but the justification has to be thorough. We assess the designation honestly before recommending a dig. This applies to your Hammersmith and Fulham address specifically.
We price each Hammersmith and Fulham basement individually, because the depth, the ground conditions, the party-wall count and the planning policy all vary house to house, and send a fixed, no-obligation quote within one working day. It covers the coordinated planning and technical set with free revisions until Hammersmith & Fulham Council approves. The structural engineer, Basement Impact Assessment specialist and any council fee are separate. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.