
Drawings for going down instead of out — a new floor dug beneath your Kensington and Chelsea house, underpinned and tanked, detailed with the structural method statement and drainage strategy the Royal Borough of Kensington and Chelsea and building control both need, delivered as a coordinated set and revised free until approved, with a free feasibility check first.
the Royal Borough of Kensington and Chelsea granted 85% of the householder planning decisions it made in its latest published year — 2 points below the 87% England-wide householder average. The borough runs the strictest basement policy in London — broadly one storey deep, under no more than half the garden, with a construction traffic management plan, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837) and Victorian (1837–1901) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Kensington and Chelsea carries at least one Article 4 direction, and conservation areas including Chelsea, Kensington and Holland Park remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Kensington and Chelsea is determined against an 8-week statutory target.
Chelsea (stucco terraces and mews streets off the King's Road), Kensington (grand stucco terraces and mansion blocks), Notting Hill (the Ladbroke Estate's stucco terraces around communal garden squares), Holland Park (large detached villas and substantial mansion flats), Knightsbridge (red-brick mansion blocks and stucco terraces) and Earls Court (tall Victorian terraces widely subdivided into flats) — these are the Kensington and Chelsea pockets our drawings cover most. Heritage designations here include Chelsea, Kensington, Holland Park, Ladbroke and Brompton. the Royal Borough of Kensington and Chelsea weighs each proposal against the RBKC Consolidated Local Plan and the Basements SPD, where with the roofscape closely protected, mansard and roof additions are judged against the prevailing profile of each terrace group. Subdivided period houses are common around Earls Court and Notting Hill, and converted flats hold no householder permitted-development rights.. On roofs the borough is concealed butterfly roofs behind the terrace parapets and mansard roofs added to the stucco terraces, over stucco-fronted Georgian and Victorian terraces, purpose-built mansion blocks and mews houses behind the main streets.
When a Kensington and Chelsea house cannot grow outward — no garden to lose, a footprint already at its limit — the only direction left is down. The tall stucco-fronted Georgian and Victorian terraces, purpose-built mansion blocks and mews houses behind the main streets that fill the borough sit on foundations shallow enough to underpin, and a dug-down lower ground floor buys a whole storey of living space beneath the existing house without changing the street at all. The value is real; so is the engineering, and the Royal Borough of Kensington and Chelsea treats a basement as a major structural intervention rather than a simple conversion.
The drawings carry more weight than any other project because the ground itself is the risk. The existing walls are underpinned in sequence so the house is never left unsupported; a new retaining structure holds back the surrounding soil; the slab and walls are tanked — usually a Type C cavity-drain system with a sump and pump — because a basement is below the water table for part of the year. The borough runs the strictest basement policy in London — broadly one storey deep, under no more than half the garden, with a construction traffic management plan, exactly the kind of constraint a basement scheme has to answer before the Royal Borough of Kensington and Chelsea will validate it.
Many of Kensington and Chelsea's basements sit under listed or conservation-area houses — Chelsea, Kensington, Holland Park, Ladbroke and Brompton among them — where a front lightwell, a rooflight in the pavement vault or any change to the historic fabric is scrutinised closely. Almost the entire borough falls within a conservation area, and Article 4 directions strip out permitted-development rights so even minor external changes on the Ladbroke or Chelsea streets need consent. We establish the designation and the borough's basement policy before a single line is drawn.

Most basements in Kensington and Chelsea need a full planning application to the Royal Borough of Kensington and Chelsea, and almost always the supporting technical documents too. Expect to apply where any of these apply — which is nearly every dig-down:
We produce the planning drawings, the structural scheme with its method statement, the waterproofing and drainage strategy and the party-wall information as a single coordinated package for the Royal Borough of Kensington and Chelsea and building control, so the engineer, the council and the neighbour are all reading the same set — the way a basement stays on programme.
Below is the Royal Borough of Kensington and Chelsea's real householder decision record, drawn from official planning statistics and refreshed as new data lands. The Royal Borough grants a fair share of householder applications but under exacting design control, with borough-wide conservation status and its restrictive basement policy the defining constraints. Basements are decided on the strength of their technical case — a complete Basement Impact Assessment and method statement move a scheme through validation and committee far faster than a bare application.
Source: MHCLG planning application statistics (householder decisions, rolling year). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
A basement is won twice — once at planning and once at building control — and both hang on the technical set. the Royal Borough of Kensington and Chelsea's planners weigh the impact on neighbours, on groundwater and on the character of the street, so the application leads with a Basement Impact Assessment and, where the policy asks, a construction management plan. Building control and the warranty provider then check the underpinning sequence, the retaining design, the waterproofing to the current standard and the means of escape from a habitable room below ground. Across Chelsea, Kensington and Notting Hill these are the details that decide whether a basement is a clean approval or a year of conditions.
With the roofscape closely protected, mansard and roof additions are judged against the prevailing profile of each terrace group. Because you are excavating within a few metres of a neighbour's wall, the Party Wall etc. Act almost always applies, and we set the drawings up so the party-wall surveyor, the structural engineer and the waterproofing designer are all working to one agreed section — the coordination that keeps a Kensington and Chelsea basement out of dispute and on programme.

We draw dig-downs and cellar conversions under the tall period houses across the borough. A few of the Kensington and Chelsea neighbourhoods where basements come up most often:
Basement conversion drawings for Chelsea's stucco terraces and mews streets off the King's Road — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
Basement conversion drawings for Kensington's grand stucco terraces and mansion blocks — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
Basement conversion drawings for Notting Hill's the Ladbroke Estate's stucco terraces around communal garden squares — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
Basement conversion drawings for Holland Park's large detached villas and substantial mansion flats — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
Basement conversion drawings for Knightsbridge's red-brick mansion blocks and stucco terraces — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
Basement conversion drawings for Earls Court's tall Victorian terraces widely subdivided into flats — underpinning-sequenced, tanked and drawn with the structural and drainage set the Royal Borough of Kensington and Chelsea needs.
A basement is the most document-heavy project a house can have. This is what each part of the set does and who checks it.
| Element | What it covers | Why it matters | Checked by |
|---|---|---|---|
| Underpinning | Deepening the existing foundations in a sequence | Keeps the house supported while you dig beneath it | Structural engineer / building control |
| Retaining & waterproofing | New retaining walls and Type C cavity drainage | Holds back the soil and keeps the room dry below the water table | Building control / warranty |
| Basement Impact Assessment | Groundwater, structure and neighbour impact | Required by the Royal Borough of Kensington and Chelsea's basement policy for planning | Planning |
| Party wall | Notices and award where you dig near a boundary | The legal route to excavate beside a neighbour's wall | Party-wall surveyors |
Under a listed or conservation-area house — such as in Chelsea and Kensington — a front lightwell or vault alteration adds a further layer of consent to the basement application.
A staged process built around the technical case a basement lives or dies on — feasibility first, so you never commit to a dig that the ground or the policy will not allow.
Send us your Kensington and Chelsea postcode and what you want below ground. We check the Royal Borough of Kensington and Chelsea's basement policy, conservation and listed status, and the likely ground and groundwater constraints before you spend on design.
We survey the house, establish existing foundation depths and levels, and coordinate the structural engineer so the underpinning and retaining scheme is built on real dimensions, not assumptions.
We produce the planning drawings with the Basement Impact Assessment and construction management plan, plus the structural method statement and waterproofing strategy, as one coordinated package for the Royal Borough of Kensington and Chelsea.
We submit to the Royal Borough of Kensington and Chelsea, answer planning and building-control queries, dovetail the party-wall process, and revise the set free until the basement is approved and signed off.
Nearly always. Excavating to create new space, deepening a cellar or forming a lightwell goes beyond permitted development, and most inner-London boroughs — the Royal Borough of Kensington and Chelsea included — run a specific basement or subterranean-development policy. A full planning application is the norm, usually supported by a Basement Impact Assessment. We confirm the exact policy route for your Kensington and Chelsea address before any drawing starts.
A Basement Impact Assessment is a technical report on how the dig affects groundwater, drainage, structure and neighbouring buildings, and most Kensington and Chelsea basement schemes need one to satisfy the Royal Borough of Kensington and Chelsea's policy. It is the document planners lean on most, because it shows the excavation has been thought through rather than assumed. We coordinate it with the structural design so the two tell the same story.
Almost certainly. A basement means excavating close to — and often underpinning beneath — a neighbour's wall, which triggers the Party Wall etc. Act 1996. You must serve notice on the adjoining owners and usually reach a party-wall award before you dig. We set the drawings up so the party-wall surveyor works from the same sections as the engineer, which keeps a Kensington and Chelsea basement out of dispute. the Royal Borough of Kensington and Chelsea is the decision-maker.
A basement sits below ground and, for part of the year, below the water table, so it is designed to be watertight rather than merely damp-proofed. The usual approach is a Type C cavity-drain system that collects any water behind the walls and floor and takes it to a sump and pump. We draw the waterproofing to the current British Standard and coordinate it with the structure, because in a Kensington and Chelsea basement the tanking and the retaining wall have to work as one. the Royal Borough of Kensington and Chelsea is the decision-maker.
Sometimes, but it is harder. A listed house — or one in a conservation area such as Chelsea and Kensington — needs listed building consent for any work affecting its fabric, and the Royal Borough of Kensington and Chelsea scrutinises lightwells, vault alterations and the effect on the historic structure closely. It can be done where the scheme protects what matters, but the justification has to be thorough. We assess the designation honestly before recommending a dig.
We price each Kensington and Chelsea basement individually, because the depth, the ground conditions, the party-wall count and the planning policy all vary house to house, and send a fixed, no-obligation quote within one working day. It covers the coordinated planning and technical set with free revisions until the Royal Borough of Kensington and Chelsea approves. The structural engineer, Basement Impact Assessment specialist and any council fee are separate. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.