MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Porch extension plans in Mid Holderness — a front porch built onto the principal elevation of a house
Mid Holderness · Porch Drawings & Planning

Porch extension plans in Mid Holderness

Front-porch drawings for Mid Holderness homes — checked against the Class D permitted-development limits, drawn to East Riding of Yorkshire Council's frontage guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Mid Holderness householder planning by the numbers

East Riding of Yorkshire Council granted 92% of the householder planning decisions it made in its latest published year — 5 points above the 87% England-wide householder average. Mid Holderness contains Aldbrough, Burton Pidsea East, Burton Pidsea West conservation areas (Aldbrough designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Mid Holderness carries at least one Article 4 direction, and conservation areas including Aldbrough, Burton Pidsea East and Burton Pidsea West remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Mid Holderness is determined against an 8-week statutory target.

Aldbrough (conservation area designated in 1974), Burton Pidsea East (conservation area designated in 1974), Burton Pidsea West (conservation area designated in 1974), Catwick (conservation area designated in 2006), Great Hatfield (conservation area designated in 1994), Lelley (conservation area designated in 1991), Long Riston (conservation area designated in 2009), Sproatley North (conservation area designated in 1987), Sproatley South (conservation area designated in 1987), Swine (conservation area designated in 1991), Withernwick (conservation area designated in 2010), Wyton (conservation area designated in 1991), Aldbrough (civil parish within Mid Holderness), Bilton (civil parish within Mid Holderness), Burstwick (civil parish within Mid Holderness), Burton Constable (civil parish within Mid Holderness), Burton Pidsea (civil parish within Mid Holderness) and Catwick (civil parish within Mid Holderness) — these are the Mid Holderness pockets our drawings cover most. Heritage designations here include Aldbrough, Burton Pidsea East, Burton Pidsea West, Catwick, Great Hatfield, Lelley, Long Riston, Sproatley North, Sproatley South, Swine, Withernwick and Wyton. East Riding of Yorkshire Council weighs each proposal against East Riding of Yorkshire Council's development plan and the design policies it applies to householder applications, where the 6,270 homes here are 15% 1973-1982, 15% 1965-1972, 14% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow trussed roofs typical of 1970s building and shallow-pitched roofs and integral garages typical of that period's building, over 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%).

What actually constrains a project in Mid Holderness

Mid Holderness's designated heritage is specific, and it is the first thing we check against your address: Aldbrough (conservation area designated in 1974), Burton Pidsea East (conservation area designated in 1974), Burton Pidsea West (conservation area designated in 1974), Catwick (conservation area designated in 2006), Great Hatfield (conservation area designated in 1994), Lelley (conservation area designated in 1991), Long Riston (conservation area designated in 2009), Sproatley North (conservation area designated in 1987), Sproatley South (conservation area designated in 1987), Swine (conservation area designated in 1991), Withernwick (conservation area designated in 2010) and Wyton (conservation area designated in 1991). Inside those boundaries permitted development is curtailed and East Riding of Yorkshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Mid Holderness takes in Aldbrough, Bilton, Burstwick, Burton Constable, Burton Pidsea and Catwick. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Mid Holderness.

On stock, Mid Holderness is 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%) — which is why shallow trussed roofs typical of 1970s building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. East Riding of Yorkshire Council decided 830 householder applications in the latest published year and granted 92%, with 95% issued inside the eight-week target. Those are the numbers our drawings are prepared against.

The full build-period split for Mid Holderness runs pre-1900 14% (870 homes), 1900-1918 2% (100 homes), 1919-1929 1% (40 homes), 1930-1939 8% (520 homes), 1945-1954 4% (280 homes), 1955-1964 14% (900 homes), 1965-1972 15% (910 homes), 1973-1982 15% (970 homes), 1983-1992 7% (460 homes), 1993-1999 7% (440 homes) and 2000-2008 7% (420 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

East Riding of Yorkshire Council also decides for Beverley Rural, Bridlington North, Bridlington South, Dale, Driffield and Rural, East Wolds and Coastal, Goole South and Hessle, so a decision in Mid Holderness sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Alpine Villa (Beck Cottage), Atwick, Atwick Hall, Atwick, Clifton House, Atwick and Green View, Atwick. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Mid Holderness in numbers — housing stock and planning decisions

Published figures for Mid Holderness and East Riding of Yorkshire Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureMid Holderness
Dwellings recorded6,270
Built pre-1900870 (14%)
Built 1900-1918100 (2%)
Built 1919-192940 (1%)
Built 1930-1939520 (8%)
Built 1945-1954280 (4%)
Built 1955-1964900 (14%)
Built 1965-1972910 (15%)
Built 1973-1982970 (15%)
Built 1983-1992460 (7%)
Built 1993-1999440 (7%)
Built 2000-2008420 (7%)
Built before 191915%
Built 1919–19399%
Built 1945–200870%
Conservation areas in Mid Holderness12 (Aldbrough, Burton Pidsea East…)
Conservation areas district-wide126
Article 4 directions recorded11
Householder applications decided830
Householder applications granted92%
Decided within 8 weeks95%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are East Riding of Yorkshire Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Why a porch is judged on the Mid Holderness street, not the plan

A porch is the smallest thing most people build and the most visible. It sits on the principal elevation, so East Riding of Yorkshire Council reads it against the rhythm of the whole street rather than against your own house alone. Mid Holderness is largely 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%), and where a run of houses shares one front-door detail, a porch that ignores it stands out from fifty metres away.

The three Class D numbers do most of the work: 3 square metres of external floor area, 3 metres of height, and a 2-metre stand-off from any boundary that fronts a highway. That last one catches more porches in Mid Holderness than the other two put together, because front gardens are shallow and the boundary is measured to the highway line, not to the kerb. We measure it on site and set the porch inside the limit, or we tell you honestly that it needs an application.

In Mid Holderness's conservation areas — Aldbrough, Burton Pidsea East, Burton Pidsea West, Catwick, Great Hatfield, Lelley, Long Riston, Sproatley North, Sproatley South, Swine, Withernwick and Wyton among them — a porch is assessed on materials, roof form and how the door surround is treated. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Mid Holderness.

Porch design drawing prepared for a Mid Holderness house frontage

Does a porch need planning permission in Mid Holderness?

Most modest porches are permitted development. You will need to apply to East Riding of Yorkshire Council if any of these apply:

  • The external floor area measures more than 3 square metres
  • Any part of the porch stands higher than 3 metres above ground level
  • Any part sits within 2 metres of a boundary that fronts a highway
  • The house is in a conservation area such as Aldbrough and Burton Pidsea East, where frontage changes are controlled
  • The building is listed — listed building consent is required whatever the size
  • An Article 4 direction applies to your street — East Riding of Yorkshire Council operates directions that can remove this right
  • The porch encloses a shared entrance to flats rather than a single house

Mid Holderness porch decisions — live from council data

Below is East Riding of Yorkshire Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. East Riding of Yorkshire Council granted 92% of its householder applications in the year to 31 March 2026, and Aldbrough shapes what is approved here. A porch application turns on frontage design and the highway stand-off, so a pack that dimensions both is decided faster than a sketch.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

92%householder applications approved in East Riding of Yorkshire
87%national average — East Riding of Yorkshire is 5 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What porches get approved across Mid Holderness

Across Aldbrough, Burton Pidsea East and Burton Pidsea West, the porches that go through are the ones that borrow from the house: the same brick or render, a roof pitched to match, and a door and side-light proportioned to the original opening. On 1970s and early-1980s houses (15% of 6,270 homes), an open-sided canopy is often the better answer than an enclosed porch — it stays clear of the floor-area limit and leaves the frontage legible.

Mid Holderness contains Aldbrough, Burton Pidsea East, Burton Pidsea West conservation areas (Aldbrough designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is exactly the sort of local reading a porch has to satisfy. Where the 2-metre highway stand-off cannot be met, we either recess the porch behind the building line or prepare a full householder application with an elevation that shows the porch in the context of its neighbours — the drawing that answers the officer's real question.

Drawing pack for a porch application in Mid Holderness

Porch drawings across Mid Holderness

We draw porches on every street type in Mid Holderness. A few of the areas where porch work comes up most often:

Aldbrough

Porch drawings for Aldbrough — conservation area designated in 1974 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Burton Pidsea East

Porch drawings for Burton Pidsea East — conservation area designated in 1974 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Burton Pidsea West

Porch drawings for Burton Pidsea West — conservation area designated in 1974 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Catwick

Porch drawings for Catwick — conservation area designated in 2006 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Great Hatfield

Porch drawings for Great Hatfield — conservation area designated in 1994 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Lelley

Porch drawings for Lelley — conservation area designated in 1991 — dimensioned to the Class D limits and drawn to East Riding of Yorkshire Council's frontage guidance.

Is your Mid Holderness porch permitted development or a full application?

Class D sets three thresholds. This is how the common cases fall either side of them.

Porch typePermitted development?What decides itWhat East Riding of Yorkshire Council checks
Open canopy over the doorUsually yes — no enclosed floor areaWhether it is enclosedProjection, materials, roof form
Enclosed porch under 3m²Yes, if under 3m high and 2m from the highway boundaryExternal floor areaHighway stand-off, frontage design
Enclosed porch over 3m²No — full applicationExternal floor areaBulk on the principal elevation
Porch in a conservation areaOnly if it meets Class D and no Article 4 appliesDesignation statusMaterials, door detail, streetscape
Porch on a listed buildingNo — listed building consent requiredListingImpact on special interest

Thresholds from the Town and Country Planning (General Permitted Development) (England) Order 2015, Schedule 2, Part 1, Class D.

Four steps to an approved Mid Holderness porch

A fixed process built around how East Riding of Yorkshire Council validates and decides frontage work — most porch drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Mid Holderness postcode. We confirm conservation, Article 4 and listing status, measure the front boundary against the 2-metre highway rule, and score your odds against live East Riding of Yorkshire Council decisions.

  2. 2

    Measured survey

    We measure the frontage, threshold level, door opening and the distance to the highway boundary — the four numbers a porch application stands or falls on.

  3. 3

    Porch design & drawings

    Chartered designers develop the porch to your brief, either inside the Class D limits or as a full application drawn to East Riding of Yorkshire Council's design guidance, with materials and roof form matched to the house.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until East Riding of Yorkshire Council issues its decision.

Frequently asked questions

Do I need planning permission for a porch in Mid Holderness?

Usually not, provided it meets all three Class D limits: no more than 3 square metres of external floor area, no more than 3 metres high, and no part within 2 metres of a boundary fronting a highway. Break any one and you need a householder application to East Riding of Yorkshire Council. On designated land, and on listed buildings, the position is different and we check it before drawing. This applies to your Mid Holderness address specifically.

How is the 3 square metres measured on a Mid Holderness porch?

It is the external floor area — measured to the outside face of the porch walls, not the usable space inside. That catches people out, because a porch that feels small internally can exceed 3 square metres once the wall thickness is counted. We measure and dimension it on the plan so the figure is beyond argument at validation. This applies to your Mid Holderness address specifically. East Riding of Yorkshire Council is the decision-maker.

What is the 2 metre highway rule for porches in Mid Holderness?

No part of a permitted-development porch may be within 2 metres of any boundary of the property that fronts a highway. In Mid Holderness this is the limit that most often pushes a porch into a full application, because front gardens are shallow. The measurement is to the boundary line, which is not always where the kerb or the fence sits — we establish it on survey. East Riding of Yorkshire Council is the decision-maker.

Can I build a porch in a Mid Holderness conservation area?

Yes, but the design bar is higher. Class D is not automatically removed in a conservation area, so a compliant porch can still be permitted development — however East Riding of Yorkshire Council will expect materials, roof pitch and door detail to respect the area's character, and an Article 4 direction can remove the right entirely. In Aldbrough and Burton Pidsea East we confirm the position on your specific address first. This applies to your Mid Holderness address specifically.

Does a porch need building regulations approval in Mid Holderness?

A porch is exempt from most building regulations if it is under 30 square metres, at ground level, separated from the house by the existing external door, and any glazing and electrics meet Parts K, N and P. Remove the original front door and the porch becomes part of the heated envelope, at which point insulation and Part L apply. We flag which side of that line your design falls on. This applies to your Mid Holderness address specifically. East Riding of Yorkshire Council is the decision-maker.

How long does East Riding of Yorkshire Council take to decide a porch application?

A householder application runs to an eight-week statutory target, and a lawful development certificate to the same. The realistic risk is not the decision but validation — an incomplete pack is returned rather than determined. We prepare the submission validation-complete and handle officer queries so the timetable holds. This applies to your Mid Holderness address specifically. East Riding of Yorkshire Council is the decision-maker.

How much do porch plans in Mid Holderness cost?

We quote each Mid Holderness porch individually, because frontage type and boundary position vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until East Riding of Yorkshire Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Porch extension plans across East Riding of Yorkshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Mid Holderness