Planning application drawings in Mid Holderness

Mid Holderness householder planning by the numbers

East Riding of Yorkshire Council granted 92% of the householder planning decisions it made in its latest published year — 5 points above the 87% England-wide householder average. Mid Holderness contains Aldbrough, Burton Pidsea East, Burton Pidsea West conservation areas (Aldbrough designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Mid Holderness carries at least one Article 4 direction, and conservation areas including Aldbrough, Burton Pidsea East and Burton Pidsea West remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Mid Holderness is determined against an 8-week statutory target.

Aldbrough (conservation area designated in 1974), Burton Pidsea East (conservation area designated in 1974), Burton Pidsea West (conservation area designated in 1974), Catwick (conservation area designated in 2006), Great Hatfield (conservation area designated in 1994), Lelley (conservation area designated in 1991), Long Riston (conservation area designated in 2009), Sproatley North (conservation area designated in 1987), Sproatley South (conservation area designated in 1987), Swine (conservation area designated in 1991), Withernwick (conservation area designated in 2010), Wyton (conservation area designated in 1991), Aldbrough (civil parish within Mid Holderness), Bilton (civil parish within Mid Holderness), Burstwick (civil parish within Mid Holderness), Burton Constable (civil parish within Mid Holderness), Burton Pidsea (civil parish within Mid Holderness) and Catwick (civil parish within Mid Holderness) — these are the Mid Holderness pockets our drawings cover most. Heritage designations here include Aldbrough, Burton Pidsea East, Burton Pidsea West, Catwick, Great Hatfield, Lelley, Long Riston, Sproatley North, Sproatley South, Swine, Withernwick and Wyton. East Riding of Yorkshire Council weighs each proposal against East Riding of Yorkshire Council's development plan and the design policies it applies to householder applications, where the 6,270 homes here are 15% 1973-1982, 15% 1965-1972, 14% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow trussed roofs typical of 1970s building and shallow-pitched roofs and integral garages typical of that period's building, over 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%).

What actually constrains a project in Mid Holderness

Mid Holderness's designated heritage is specific, and it is the first thing we check against your address: Aldbrough (conservation area designated in 1974), Burton Pidsea East (conservation area designated in 1974), Burton Pidsea West (conservation area designated in 1974), Catwick (conservation area designated in 2006), Great Hatfield (conservation area designated in 1994), Lelley (conservation area designated in 1991), Long Riston (conservation area designated in 2009), Sproatley North (conservation area designated in 1987), Sproatley South (conservation area designated in 1987), Swine (conservation area designated in 1991), Withernwick (conservation area designated in 2010) and Wyton (conservation area designated in 1991). Inside those boundaries permitted development is curtailed and East Riding of Yorkshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Mid Holderness takes in Aldbrough, Bilton, Burstwick, Burton Constable, Burton Pidsea and Catwick. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Mid Holderness.

On stock, Mid Holderness is 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%) — which is why shallow trussed roofs typical of 1970s building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. East Riding of Yorkshire Council decided 830 householder applications in the latest published year and granted 92%, with 95% issued inside the eight-week target. Those are the numbers our drawings are prepared against.

The full build-period split for Mid Holderness runs pre-1900 14% (870 homes), 1900-1918 2% (100 homes), 1919-1929 1% (40 homes), 1930-1939 8% (520 homes), 1945-1954 4% (280 homes), 1955-1964 14% (900 homes), 1965-1972 15% (910 homes), 1973-1982 15% (970 homes), 1983-1992 7% (460 homes), 1993-1999 7% (440 homes) and 2000-2008 7% (420 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

East Riding of Yorkshire Council also decides for Beverley Rural, Bridlington North, Bridlington South, Dale, Driffield and Rural, East Wolds and Coastal, Goole South and Hessle, so a decision in Mid Holderness sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Alpine Villa (Beck Cottage), Atwick, Atwick Hall, Atwick, Clifton House, Atwick and Green View, Atwick. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

What goes in a Mid Holderness planning application

Whatever you are building, East Riding of Yorkshire Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. East Riding of Yorkshire Council assesses each proposal against East Riding of Yorkshire Council's development plan and the design policies it applies to householder applications, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Mid Holderness's stock, which runs to 1970s and early-1980s houses (15% of 6,270 homes), late-1960s and early-1970s houses (15%) and late-1950s and early-1960s houses (14%), the same scheme is drawn differently to answer the concerns officers raise here. Mid Holderness contains Aldbrough, Burton Pidsea East, Burton Pidsea West conservation areas (Aldbrough designated 1974), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Aldbrough, Burton Pidsea East, Burton Pidsea West, Catwick, Great Hatfield, Lelley, Long Riston, Sproatley North, Sproatley South, Swine, Withernwick and Wyton among Mid Holderness's — validation is stricter still, often demanding heritage detail and sometimes additional plans. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Mid Holderness. We confirm the designation before drawing so the pack meets the higher bar first time.