MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Porch extension plans in Kirton and Frampton — a front porch built onto the principal elevation of a house
Kirton and Frampton · Porch Drawings & Planning

Porch extension plans in Kirton and Frampton

Front-porch drawings for Kirton and Frampton homes — checked against the Class D permitted-development limits, drawn to Boston Borough Council's frontage guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Kirton and Frampton planning decisions and design rules

Boston Borough Council granted 96% of the householder planning decisions it made in its latest published year — 9 points above the 87% England-wide householder average. Kirton and Frampton contains Frampton, Kirton, Kirton Holme conservation areas (Frampton designated 1970), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Frampton, Kirton and Kirton Holme those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Kirton and Frampton is determined against an 8-week statutory target.

Frampton (conservation area designated in 1970), Kirton (conservation area designated in 1970), Kirton Holme (conservation area designated in 1989), Frampton (civil parish within Kirton and Frampton) and Kirton (civil parish within Kirton and Frampton) — these are the Kirton and Frampton pockets our drawings cover most. Heritage designations here include Frampton, Kirton and Kirton Holme. Boston Borough Council weighs each proposal against Boston Borough Council's adopted local plan and its householder design guidance, where the 3,370 homes here are 17% 2000-2008, 10% pre-1900, 9% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 2000s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%).

Why a Kirton and Frampton scheme is judged on Kirton and Frampton terms

What is permitted in Kirton and Frampton turns on designation first, so that is where we start: Frampton (conservation area designated in 1970), Kirton (conservation area designated in 1970) and Kirton Holme (conservation area designated in 1989). Inside those boundaries permitted development is curtailed and Boston Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Kirton and Frampton takes in Frampton and Kirton. No Article 4 direction is recorded for Boston Borough Council, but Kirton and Frampton's 3 conservation areas still limit permitted development on those streets.

On stock, Kirton and Frampton is 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%) — which is why trussed-rafter roofs typical of 2000s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Boston Borough Council decided 81 householder applications in the latest published year and granted 96%, with 70% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Kirton and Frampton runs pre-1900 10% (330 homes), 1900-1918 4% (130 homes), 1919-1929 2% (70 homes), 1930-1939 9% (300 homes), 1945-1954 7% (250 homes), 1955-1964 4% (120 homes), 1965-1972 9% (300 homes), 1973-1982 9% (320 homes), 1983-1992 5% (170 homes), 1993-1999 5% (160 homes) and 2000-2008 17% (570 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Boston Borough Council also decides for Five Village and Old Leake and Wrangle, so a decision in Kirton and Frampton sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Kirton and Frampton by the published data

Published figures for Kirton and Frampton and Boston Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureKirton and Frampton
Dwellings recorded3,370
Built pre-1900330 (10%)
Built 1900-1918130 (4%)
Built 1919-192970 (2%)
Built 1930-1939300 (9%)
Built 1945-1954250 (7%)
Built 1955-1964120 (4%)
Built 1965-1972300 (9%)
Built 1973-1982320 (9%)
Built 1983-1992170 (5%)
Built 1993-1999160 (5%)
Built 2000-2008570 (17%)
Built before 191914%
Built 1919–193911%
Built 1945–200856%
Conservation areas in Kirton and Frampton3 (Frampton, Kirton…)
Conservation areas district-wide11
Article 4 directions recorded0
Householder applications decided81
Householder applications granted96%
Decided within 8 weeks70%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Boston Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Why a porch is judged on the Kirton and Frampton street, not the plan

A porch is the smallest thing most people build and the most visible. It sits on the principal elevation, so Boston Borough Council reads it against the rhythm of the whole street rather than against your own house alone. Kirton and Frampton is largely 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%), and where a run of houses shares one front-door detail, a porch that ignores it stands out from fifty metres away.

The three Class D numbers do most of the work: 3 square metres of external floor area, 3 metres of height, and a 2-metre stand-off from any boundary that fronts a highway. That last one catches more porches in Kirton and Frampton than the other two put together, because front gardens are shallow and the boundary is measured to the highway line, not to the kerb. We measure it on site and set the porch inside the limit, or we tell you honestly that it needs an application.

In Kirton and Frampton's conservation areas — Frampton, Kirton and Kirton Holme among them — a porch is assessed on materials, roof form and how the door surround is treated. No Article 4 direction is recorded for Boston Borough Council, but Kirton and Frampton's 3 conservation areas still limit permitted development on those streets.

Porch design drawing prepared for a Kirton and Frampton house frontage

Does a porch need planning permission in Kirton and Frampton?

Most modest porches are permitted development. You will need to apply to Boston Borough Council if any of these apply:

  • The external floor area measures more than 3 square metres
  • Any part of the porch stands higher than 3 metres above ground level
  • Any part sits within 2 metres of a boundary that fronts a highway
  • The house is in a conservation area such as Frampton and Kirton, where frontage changes are controlled
  • The building is listed — listed building consent is required whatever the size
  • The porch encloses a shared entrance to flats rather than a single house

Kirton and Frampton porch decisions — live from council data

Below is Boston Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Boston Borough Council granted 96% of its householder applications in the year to 31 March 2026, and Frampton shapes what is approved here. A porch application turns on frontage design and the highway stand-off, so a pack that dimensions both is decided faster than a sketch.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

96%householder applications approved in Boston
87%national average — Boston is 9 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What porches get approved across Kirton and Frampton

Across Frampton, Kirton and Kirton Holme, the porches that go through are the ones that borrow from the house: the same brick or render, a roof pitched to match, and a door and side-light proportioned to the original opening. On 2000s houses and apartments (17% of 3,370 homes), an open-sided canopy is often the better answer than an enclosed porch — it stays clear of the floor-area limit and leaves the frontage legible.

Kirton and Frampton contains Frampton, Kirton, Kirton Holme conservation areas (Frampton designated 1970), so materials, fenestration and roof form are assessed against the appraisal, which is exactly the sort of local reading a porch has to satisfy. Where the 2-metre highway stand-off cannot be met, we either recess the porch behind the building line or prepare a full householder application with an elevation that shows the porch in the context of its neighbours — the drawing that answers the officer's real question.

Drawing pack for a porch application in Kirton and Frampton

Porch drawings across Kirton and Frampton

We draw porches on every street type in Kirton and Frampton. A few of the areas where porch work comes up most often:

Frampton

Porch drawings for Frampton — conservation area designated in 1970 — dimensioned to the Class D limits and drawn to Boston Borough Council's frontage guidance.

Kirton

Porch drawings for Kirton — conservation area designated in 1970 — dimensioned to the Class D limits and drawn to Boston Borough Council's frontage guidance.

Kirton Holme

Porch drawings for Kirton Holme — conservation area designated in 1989 — dimensioned to the Class D limits and drawn to Boston Borough Council's frontage guidance.

Frampton

Porch drawings for Frampton — civil parish within Kirton and Frampton — dimensioned to the Class D limits and drawn to Boston Borough Council's frontage guidance.

Kirton

Porch drawings for Kirton — civil parish within Kirton and Frampton — dimensioned to the Class D limits and drawn to Boston Borough Council's frontage guidance.

Is your Kirton and Frampton porch permitted development or a full application?

Class D sets three thresholds. This is how the common cases fall either side of them.

Porch typePermitted development?What decides itWhat Boston Borough Council checks
Open canopy over the doorUsually yes — no enclosed floor areaWhether it is enclosedProjection, materials, roof form
Enclosed porch under 3m²Yes, if under 3m high and 2m from the highway boundaryExternal floor areaHighway stand-off, frontage design
Enclosed porch over 3m²No — full applicationExternal floor areaBulk on the principal elevation
Porch in a conservation areaOnly if it meets Class D and no Article 4 appliesDesignation statusMaterials, door detail, streetscape
Porch on a listed buildingNo — listed building consent requiredListingImpact on special interest

Thresholds from the Town and Country Planning (General Permitted Development) (England) Order 2015, Schedule 2, Part 1, Class D.

Four steps to an approved Kirton and Frampton porch

A fixed process built around how Boston Borough Council validates and decides frontage work — most porch drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Kirton and Frampton postcode. We confirm conservation, Article 4 and listing status, measure the front boundary against the 2-metre highway rule, and score your odds against live Boston Borough Council decisions.

  2. 2

    Measured survey

    We measure the frontage, threshold level, door opening and the distance to the highway boundary — the four numbers a porch application stands or falls on.

  3. 3

    Porch design & drawings

    Chartered designers develop the porch to your brief, either inside the Class D limits or as a full application drawn to Boston Borough Council's design guidance, with materials and roof form matched to the house.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Boston Borough Council issues its decision.

Frequently asked questions

Do I need planning permission for a porch in Kirton and Frampton?

Usually not, provided it meets all three Class D limits: no more than 3 square metres of external floor area, no more than 3 metres high, and no part within 2 metres of a boundary fronting a highway. Break any one and you need a householder application to Boston Borough Council. On designated land, and on listed buildings, the position is different and we check it before drawing. This applies to your Kirton and Frampton address specifically.

How is the 3 square metres measured on a Kirton and Frampton porch?

It is the external floor area — measured to the outside face of the porch walls, not the usable space inside. That catches people out, because a porch that feels small internally can exceed 3 square metres once the wall thickness is counted. We measure and dimension it on the plan so the figure is beyond argument at validation. This applies to your Kirton and Frampton address specifically. Boston Borough Council is the decision-maker.

What is the 2 metre highway rule for porches in Kirton and Frampton?

No part of a permitted-development porch may be within 2 metres of any boundary of the property that fronts a highway. In Kirton and Frampton this is the limit that most often pushes a porch into a full application, because front gardens are shallow. The measurement is to the boundary line, which is not always where the kerb or the fence sits — we establish it on survey. Boston Borough Council is the decision-maker.

Can I build a porch in a Kirton and Frampton conservation area?

Yes, but the design bar is higher. Class D is not automatically removed in a conservation area, so a compliant porch can still be permitted development — however Boston Borough Council will expect materials, roof pitch and door detail to respect the area's character, and an Article 4 direction can remove the right entirely. In Frampton and Kirton we confirm the position on your specific address first. This applies to your Kirton and Frampton address specifically.

Does a porch need building regulations approval in Kirton and Frampton?

A porch is exempt from most building regulations if it is under 30 square metres, at ground level, separated from the house by the existing external door, and any glazing and electrics meet Parts K, N and P. Remove the original front door and the porch becomes part of the heated envelope, at which point insulation and Part L apply. We flag which side of that line your design falls on. This applies to your Kirton and Frampton address specifically. Boston Borough Council is the decision-maker.

How long does Boston Borough Council take to decide a porch application?

A householder application runs to an eight-week statutory target, and a lawful development certificate to the same. The realistic risk is not the decision but validation — an incomplete pack is returned rather than determined. We prepare the submission validation-complete and handle officer queries so the timetable holds. This applies to your Kirton and Frampton address specifically. Boston Borough Council is the decision-maker.

How much do porch plans in Kirton and Frampton cost?

We quote each Kirton and Frampton porch individually, because frontage type and boundary position vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Boston Borough Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Porch extension plans across Boston

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Kirton and Frampton