Dormer, hip-to-gable and mansard loft conversion drawings for Kirton and Frampton homes — prepared to Boston Borough Council's design guidance, delivered in days and revised free until your decision lands, with a free approval-odds score first.
Boston Borough Council granted 96% of the householder planning decisions it made in its latest published year — 9 points above the 87% England-wide householder average. Kirton and Frampton contains Frampton, Kirton, Kirton Holme conservation areas (Frampton designated 1970), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Frampton, Kirton and Kirton Holme those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Kirton and Frampton is determined against an 8-week statutory target.
Frampton (conservation area designated in 1970), Kirton (conservation area designated in 1970), Kirton Holme (conservation area designated in 1989), Frampton (civil parish within Kirton and Frampton) and Kirton (civil parish within Kirton and Frampton) — these are the Kirton and Frampton pockets our drawings cover most. Heritage designations here include Frampton, Kirton and Kirton Holme. Boston Borough Council weighs each proposal against Boston Borough Council's adopted local plan and its householder design guidance, where the 3,370 homes here are 17% 2000-2008, 10% pre-1900, 9% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 2000s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%).
What is permitted in Kirton and Frampton turns on designation first, so that is where we start: Frampton (conservation area designated in 1970), Kirton (conservation area designated in 1970) and Kirton Holme (conservation area designated in 1989). Inside those boundaries permitted development is curtailed and Boston Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Kirton and Frampton takes in Frampton and Kirton. No Article 4 direction is recorded for Boston Borough Council, but Kirton and Frampton's 3 conservation areas still limit permitted development on those streets.
On stock, Kirton and Frampton is 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%) — which is why trussed-rafter roofs typical of 2000s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Boston Borough Council decided 81 householder applications in the latest published year and granted 96%, with 70% issued inside the eight-week target. We draw to that record rather than to a national average.
The full build-period split for Kirton and Frampton runs pre-1900 10% (330 homes), 1900-1918 4% (130 homes), 1919-1929 2% (70 homes), 1930-1939 9% (300 homes), 1945-1954 7% (250 homes), 1955-1964 4% (120 homes), 1965-1972 9% (300 homes), 1973-1982 9% (320 homes), 1983-1992 5% (170 homes), 1993-1999 5% (160 homes) and 2000-2008 17% (570 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Boston Borough Council also decides for Five Village and Old Leake and Wrangle, so a decision in Kirton and Frampton sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Kirton and Frampton and Boston Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Kirton and Frampton |
|---|---|
| Dwellings recorded | 3,370 |
| Built pre-1900 | 330 (10%) |
| Built 1900-1918 | 130 (4%) |
| Built 1919-1929 | 70 (2%) |
| Built 1930-1939 | 300 (9%) |
| Built 1945-1954 | 250 (7%) |
| Built 1955-1964 | 120 (4%) |
| Built 1965-1972 | 300 (9%) |
| Built 1973-1982 | 320 (9%) |
| Built 1983-1992 | 170 (5%) |
| Built 1993-1999 | 160 (5%) |
| Built 2000-2008 | 570 (17%) |
| Built before 1919 | 14% |
| Built 1919–1939 | 11% |
| Built 1945–2008 | 56% |
| Conservation areas in Kirton and Frampton | 3 (Frampton, Kirton…) |
| Conservation areas district-wide | 11 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 81 |
| Householder applications granted | 96% |
| Decided within 8 weeks | 70% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Boston Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Kirton and Frampton's roofs set the brief. The borough is built largely from 2000s houses and apartments (17% of 3,370 homes), Victorian and earlier houses (10%) and 1970s and early-1980s houses (9%), and its lofts sit under trussed-rafter roofs typical of 2000s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building — the geometry that decides whether a rear dormer, a hip-to-gable or a mansard gives you the headroom you want. Boston Borough Council assesses loft proposals against Boston Borough Council's adopted local plan and its householder design guidance, and its case officers read each roof against the pair next door and the wider street before they read the plans.
That makes drawing quality decisive. We measure ridge and eaves heights, roof pitch and the existing stair, calculate the added volume against the permitted-development limits exactly, and show the workings on the drawings so Boston Borough Council can verify them. Kirton and Frampton contains Frampton, Kirton, Kirton Holme conservation areas (Frampton designated 1970), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the page rather than leave it for the case officer to raise.
Kirton and Frampton also carries protected streets — Frampton, Kirton and Kirton Holme among them. No Article 4 direction is recorded for Boston Borough Council, but Kirton and Frampton's 3 conservation areas still limit permitted development on those streets. We check your address against those designations before a line is drawn.
Many Kirton and Frampton loft conversions proceed without planning permission — a rear dormer within the permitted-development volume limits (40 cubic metres on a terrace, 50 on a semi or detached house) is usually lawful. You will normally need a full application to Boston Borough Council if any of these apply:
We draw the roof line, the ridge height and the neighbour's daylight on the page — the relationships Boston Borough Council's officers check first — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Boston Borough Council's real householder decision record, pulled from official planning statistics and updated as new data lands. Boston Borough Council granted 96% of its householder applications in the year to 31 March 2026, and Frampton shapes what is approved here. Professionally prepared loft drawings anticipate those pressure points before submission, which is why complete, policy-literate packs are decided faster and refused less often than DIY applications.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Frampton, Kirton and Kirton Holme, the recurring loft is the rear dormer — a box across the back roof slope that turns a cramped attic into a full-height double bedroom and en-suite. On trussed-rafter roofs typical of 2000s building, that is usually the most efficient use of the roof; where the stock is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, a hip-to-gable followed by a rear dormer unlocks far more space, though it needs a full application.
The 3,370 homes here are 17% 2000-2008, 10% pre-1900, 9% 1973-1982, which is what sets the realistic roof and rear-projection options. We draw the dormer inside the volume allowance, keep the flat-roof build-up below the ridge, and set the face back from the eaves as the rules require — so the pack answers Boston Borough Council's questions before they are asked. Where permitted-development rights are exhausted or removed, we prepare a householder application composed to the borough's roof-alteration guidance instead.
We draw loft conversions on every street in the borough. A few of the neighbourhoods where Kirton and Frampton roofs come up most often:
Loft conversion drawings for Frampton's conservation area designated in 1970 — measured, volume-checked and drawn to Boston Borough Council's guidance.
Loft conversion drawings for Kirton's conservation area designated in 1970 — measured, volume-checked and drawn to Boston Borough Council's guidance.
Loft conversion drawings for Kirton Holme's conservation area designated in 1989 — measured, volume-checked and drawn to Boston Borough Council's guidance.
Loft conversion drawings for Frampton's civil parish within Kirton and Frampton — measured, volume-checked and drawn to Boston Borough Council's guidance.
Loft conversion drawings for Kirton's civil parish within Kirton and Frampton — measured, volume-checked and drawn to Boston Borough Council's guidance.
The right loft in Kirton and Frampton depends on your roof. This is how the main types compare on planning route and the space they add.
| Loft type | Permitted development? | Space & headroom | What Boston Borough Council checks |
|---|---|---|---|
| Rear dormer | Usually yes, within volume limits | Full-height double room at the back | Volume, set-back from eaves, ridge height |
| Hip-to-gable | No — full application | Extends the whole side of the roof | Roof bulk and the symmetry of the pair |
| Mansard | No — full application | Maximum floor area across the roof | Street character, especially in conservation areas |
| Rooflights only | Usually yes (Class C) | Light and headroom, no extra footprint | Whether rooflights sit within the existing slope |
Route depends on your street — conservation areas such as Frampton and Kirton and Article 4 directions can remove permitted-development rights.
A fixed process built around how Boston Borough Council validates and decides householder loft applications — most drawings are submission-ready within seven days of survey.
Tell us your Kirton and Frampton postcode and roof type. We confirm your conservation and Article 4 status, how much permitted-development volume you have left, and score your odds against live Boston Borough Council decisions.
We measure ridge and eaves heights, roof pitch, joist levels and the existing stair — the numbers the volume calculation and head heights depend on.
Chartered designers develop the dormer, hip-to-gable or mansard to your brief, drawn inside the Class B limits or to Boston Borough Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Boston Borough Council issues its decision.
Often not. A rear dormer within 40 cubic metres on a terrace, or 50 on a semi-detached or detached house, set back from the eaves and no higher than the ridge, is usually permitted development. In Kirton and Frampton the main exceptions are hip-to-gable conversions, dormers visible from the highway, and homes in conservation areas such as Frampton and Kirton or on streets with an Article 4 direction. Boston Borough Council is the decision-maker.
Generally no. In conservation areas including Frampton and Kirton, Class B permitted-development rights for lofts are removed, so a rear dormer that would be lawful elsewhere needs a full application to Boston Borough Council. No Article 4 direction is recorded for Boston Borough Council, but Kirton and Frampton's 3 conservation areas still limit permitted development on those streets. We check your exact address before drawing.
On trussed-rafter roofs typical of 2000s building, common across Kirton and Frampton, a rear dormer is usually the most efficient conversion and often permitted development. Where the roof is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, a hip-to-gable followed by a rear dormer gains far more usable space but needs planning permission. Our survey confirms which your roof supports before we draw. Boston Borough Council is the decision-maker.
A householder planning application in Kirton and Frampton runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though validation can add time if the pack is incomplete. We submit validation-complete drawings and manage case-officer queries to keep the decision on track. Boston Borough Council is the decision-maker.
If your dormer is permitted development, a lawful development certificate from Boston Borough Council is council-stamped proof of that — worth having, because every buyer's solicitor will ask for it when you sell. We prepare and submit the certificate application with the same drawing pack. This applies to your Kirton and Frampton address specifically.
Every roof is different, so we quote each Kirton and Frampton project individually — a fixed, no-obligation price back within one working day. The quote covers the full drawing pack with free revisions until Boston Borough Council approves, and we tell you upfront whether your loft qualifies as permitted development. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.