MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Sevenoaks home — scaled plans and elevations ready for submission
Sevenoaks · Planning Application Drawings & Submission

Planning application drawings in Sevenoaks

The full drawing set for a Sevenoaks application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Sevenoaks District Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Sevenoaks planning decisions and design rules

Sevenoaks District Council granted 87% of the householder planning decisions it made in its latest published year — level with the 87% England-wide householder average. Around 93% of the district is Metropolitan Green Belt, one of the most green-belt-constrained districts in England, so most countryside development faces a very-special-circumstances test, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837), Victorian (1837–1901), Edwardian (1901–1910), interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Sevenoaks carries at least one Article 4 direction, and conservation areas including Sevenoaks High Street, The Vine and Sevenoaks Weald remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Sevenoaks is determined against an 8-week statutory target.

Sevenoaks (the historic market-town core around the High Street and The Vine, with a Georgian and Victorian townscape), Westerham (a historic market town with a conservation-area centre), Kemsing (a downland village where front gardens and boundaries are controlled by an Article 4 direction), Otford (a historic green-belt village of vernacular cottages around the pond), Edenbridge (a small town on the district's southern High Weald edge) and Swanley (a denser, more suburban postwar settlement to the north) — these are the Sevenoaks pockets our drawings cover most. Heritage designations here include Sevenoaks High Street, The Vine, Sevenoaks Weald, Hartslands, Westerham and Kemsing. Sevenoaks District Council weighs each proposal against the Sevenoaks Core Strategy (adopted February 2011) and the Allocations and Development Management Plan (adopted February 2015), where over half the district lies within the Kent Downs or High Weald National Landscapes (AONBs), where landscape protection shapes design and siting. Converted flats and maisonettes appear around Sevenoaks town and Swanley, and none of them hold householder permitted-development rights.. On roofs the borough is dual-pitch tiled roofs on the town villas and terraces and steep tiled and hipped roofs on the vernacular village cottages, over Victorian and Edwardian villas and terraces around Sevenoaks town, interwar and postwar detached and semi-detached commuter housing, historic vernacular cottages in Kentish ragstone, weatherboarding and tile-hanging across the green-belt and AONB villages and larger country properties in the rural south.

What goes in a Sevenoaks planning application

Whatever you are building, Sevenoaks District Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Sevenoaks District Council assesses each proposal against the Sevenoaks Core Strategy (adopted February 2011) and the Allocations and Development Management Plan (adopted February 2015), and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Sevenoaks's stock, which runs to Victorian and Edwardian villas and terraces around Sevenoaks town, interwar and postwar detached and semi-detached commuter housing, historic vernacular cottages in Kentish ragstone, weatherboarding and tile-hanging across the green-belt and AONB villages and larger country properties in the rural south, the same scheme is drawn differently to answer the concerns officers raise here. Around 93% of the district is Metropolitan Green Belt, one of the most green-belt-constrained districts in England, so most countryside development faces a very-special-circumstances test, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Sevenoaks High Street, The Vine, Sevenoaks Weald, Hartslands, Westerham and Kemsing among Sevenoaks's — validation is stricter still, often demanding heritage detail and sometimes additional plans. The Kemsing conservation area Article 4 direction (adopted 2023) brings the loss or alteration of front boundary treatments and front gardens under planning control, and the district's many conservation areas such as Westerham and the Sevenoaks High Street layer further restrictions on external changes. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Sevenoaks application

What drawings do I need for a planning application in Sevenoaks?

Sevenoaks District Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Sevenoaks District Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Sevenoaks operates several, which can change what is needed

Sevenoaks planning decisions — live from council data

Below is Sevenoaks District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Sevenoaks grants a fair share of applications broadly in line with the national picture, with pervasive Green Belt and AONB coverage the defining pressure on anything beyond modest householder work. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

90%householder applications approved in Sevenoaks
87%national average — Sevenoaks is 3 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Sevenoaks applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Sevenoaks District Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Sevenoaks applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. Over half the district lies within the Kent Downs or High Weald National Landscapes (AONBs), where landscape protection shapes design and siting. Across Sevenoaks, Westerham and Kemsing the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Sevenoaks planning application

Applications we draw across Sevenoaks

The application pack is the same discipline whatever the project. A few of the Sevenoaks neighbourhoods and property types we prepare drawings for most often:

Sevenoaks

Planning drawings for Sevenoaks's the historic market-town core around the High Street and The Vine, with a Georgian and Victorian townscape — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Westerham

Planning drawings for Westerham's a historic market town with a conservation-area centre — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Kemsing

Planning drawings for Kemsing's a downland village where front gardens and boundaries are controlled by an Article 4 direction — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Otford

Planning drawings for Otford's a historic green-belt village of vernacular cottages around the pond — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Edenbridge

Planning drawings for Edenbridge's a small town on the district's southern High Weald edge — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Swanley

Planning drawings for Swanley's a denser, more suburban postwar settlement to the north — scaled, validation-ready and drawn to Sevenoaks District Council's guidance.

Which application do I make in Sevenoaks?

The route decides what Sevenoaks District Council needs and how long it takes. This is how the common Sevenoaks routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Sevenoaks High Street and The Vine, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Sevenoaks application

A fixed process built around how Sevenoaks District Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Sevenoaks postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Sevenoaks District Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Sevenoaks District Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Sevenoaks District Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Sevenoaks?

Sevenoaks District Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed.

Why do Sevenoaks planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Sevenoaks District Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return.

Can you submit the Sevenoaks planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Sevenoaks District Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself.

How long does Sevenoaks District Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Sevenoaks District Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes.

Do I need planning drawings if my project is permitted development in Sevenoaks?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Sevenoaks District Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Sevenoaks High Street and The Vine, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit.

How much do planning application drawings in Sevenoaks cost?

We price each Sevenoaks job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Sevenoaks District Council decides. The Sevenoaks District Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across London's Outskirts

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Sevenoaks