MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Caldecote home — scaled plans and elevations ready for submission
Caldecote · Planning Application Drawings & Submission

Planning application drawings in Caldecote

The full drawing set for a Caldecote application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to South Cambridgeshire District Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Caldecote householder planning by the numbers

South Cambridgeshire District Council granted 95% of the householder planning decisions it made in its latest published year — 8 points above the 87% England-wide householder average. Caldecote contains Bourn, Bourn Caxton End, Caldecote conservation areas (Bourn designated 1997), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Caldecote carries at least one Article 4 direction, and conservation areas including Bourn, Bourn Caxton End and Caldecote remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Caldecote is determined against an 8-week statutory target.

Bourn (conservation area designated in 1997), Bourn Caxton End (conservation area designated in 1997), Caldecote (conservation area designated in 1988), Kingston (conservation area designated in 1974), Little Gransden (conservation area designated in 2006), Kingston (civil parish within Caldecote), Little Gransden (civil parish within Caldecote), Longstowe (civil parish within Caldecote), Bourn (civil parish within Caldecote) and Childerley (civil parish within Caldecote) — these are the Caldecote pockets our drawings cover most. Heritage designations here include Bourn, Bourn Caxton End, Caldecote, Kingston and Little Gransden. South Cambridgeshire District Council weighs each proposal against South Cambridgeshire District Council's adopted local plan and its householder design guidance, where the 1,350 homes here are 32% 2000-2008, 8% 1955-1964, 7% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 2000s building and shallow gabled roofs typical of that period's building, over 2000s houses and apartments (32% of 1,350 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (7%).

What actually constrains a project in Caldecote

Caldecote's designated heritage is specific, and it is the first thing we check against your address: Bourn (conservation area designated in 1997), Bourn Caxton End (conservation area designated in 1997), Caldecote (conservation area designated in 1988), Kingston (conservation area designated in 1974) and Little Gransden (conservation area designated in 2006). Inside those boundaries permitted development is curtailed and South Cambridgeshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Caldecote takes in Kingston, Little Gransden, Longstowe, Bourn and Childerley. South Cambridgeshire District Council has 8 recorded Article 4 directions, removing permitted development for painting the exterior — check the address before assuming PD applies in Caldecote.

On stock, Caldecote is 2000s houses and apartments (32% of 1,350 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (7%) — which is why trussed-rafter roofs typical of 2000s building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. South Cambridgeshire District Council decided 787 householder applications in the latest published year and granted 95%, with 84% issued inside the eight-week target. Those are the numbers our drawings are prepared against.

The full build-period split for Caldecote runs pre-1900 6% (80 homes), 1900-1918 1% (10 homes), 1919-1929 1% (20 homes), 1930-1939 3% (40 homes), 1945-1954 1% (20 homes), 1955-1964 8% (110 homes), 1965-1972 4% (50 homes), 1973-1982 7% (90 homes), 1983-1992 4% (60 homes), 1993-1999 3% (40 homes) and 2000-2008 32% (430 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

South Cambridgeshire District Council also decides for Balsham, Barrington, Bassingbourn, Cottenham, Fen Ditton & Fulbourn, Foxton, Girton and Hardwick, so a decision in Caldecote sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Beach Road Cottenham, Clay Close Lane, Impington, Land Adjacent To Villa Road Impington and Land Opp. Milestone Farm, Great Chishill. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Caldecote in numbers — housing stock and planning decisions

Published figures for Caldecote and South Cambridgeshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureCaldecote
Dwellings recorded1,350
Built pre-190080 (6%)
Built 1900-191810 (1%)
Built 1919-192920 (1%)
Built 1930-193940 (3%)
Built 1945-195420 (1%)
Built 1955-1964110 (8%)
Built 1965-197250 (4%)
Built 1973-198290 (7%)
Built 1983-199260 (4%)
Built 1993-199940 (3%)
Built 2000-2008430 (32%)
Built before 19197%
Built 1919–19394%
Built 1945–200859%
Conservation areas in Caldecote5 (Bourn, Bourn Caxton End…)
Conservation areas district-wide85
Article 4 directions recorded8
Householder applications decided787
Householder applications granted95%
Decided within 8 weeks84%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are South Cambridgeshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Caldecote planning application

Whatever you are building, South Cambridgeshire District Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. South Cambridgeshire District Council assesses each proposal against South Cambridgeshire District Council's adopted local plan and its householder design guidance, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Caldecote's stock, which runs to 2000s houses and apartments (32% of 1,350 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (7%), the same scheme is drawn differently to answer the concerns officers raise here. Caldecote contains Bourn, Bourn Caxton End, Caldecote conservation areas (Bourn designated 1997), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Bourn, Bourn Caxton End, Caldecote, Kingston and Little Gransden among Caldecote's — validation is stricter still, often demanding heritage detail and sometimes additional plans. South Cambridgeshire District Council has 8 recorded Article 4 directions, removing permitted development for painting the exterior — check the address before assuming PD applies in Caldecote. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Caldecote application

What drawings do I need for a planning application in Caldecote?

South Cambridgeshire District Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where South Cambridgeshire District Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Caldecote operates several, which can change what is needed

Caldecote planning decisions — live from council data

Below is South Cambridgeshire District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. South Cambridgeshire District Council granted 95% of its householder applications in the year to 31 March 2026, and Bourn shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

95%householder applications approved in South Cambridgeshire
87%national average — South Cambridgeshire is 8 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Caldecote applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — South Cambridgeshire District Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Caldecote applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 1,350 homes here are 32% 2000-2008, 8% 1955-1964, 7% 1973-1982, which is what sets the realistic roof and rear-projection options. Across Bourn, Bourn Caxton End and Caldecote the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Caldecote planning application

Applications we draw across Caldecote

The application pack is the same discipline whatever the project. A few of the Caldecote neighbourhoods and property types we prepare drawings for most often:

Bourn

Planning drawings for Bourn's conservation area designated in 1997 — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Bourn Caxton End

Planning drawings for Bourn Caxton End's conservation area designated in 1997 — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Caldecote

Planning drawings for Caldecote's conservation area designated in 1988 — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Kingston

Planning drawings for Kingston's conservation area designated in 1974 — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Little Gransden

Planning drawings for Little Gransden's conservation area designated in 2006 — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Kingston

Planning drawings for Kingston's civil parish within Caldecote — scaled, validation-ready and drawn to South Cambridgeshire District Council's guidance.

Which application do I make in Caldecote?

The route decides what South Cambridgeshire District Council needs and how long it takes. This is how the common Caldecote routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Bourn and Bourn Caxton End, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Caldecote application

A fixed process built around how South Cambridgeshire District Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Caldecote postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live South Cambridgeshire District Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to South Cambridgeshire District Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until South Cambridgeshire District Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Caldecote?

South Cambridgeshire District Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Caldecote address specifically.

Why do Caldecote planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. South Cambridgeshire District Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Caldecote address specifically.

Can you submit the Caldecote planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the South Cambridgeshire District Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Caldecote address specifically.

How long does South Cambridgeshire District Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to South Cambridgeshire District Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Caldecote address specifically.

Do I need planning drawings if my project is permitted development in Caldecote?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from South Cambridgeshire District Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Bourn and Bourn Caxton End, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Caldecote address specifically.

How much do planning application drawings in Caldecote cost?

We price each Caldecote job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until South Cambridgeshire District Council decides. The South Cambridgeshire District Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across South Cambridgeshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Caldecote