Dormer, hip-to-gable and mansard loft conversion drawings for Blunsdon and Highworth homes — prepared to Swindon Borough Council's design guidance, delivered in days and revised free until your decision lands, with a free approval-odds score first.
Swindon Borough Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Blunsdon and Highworth contains Broad Blunsdon, Castle Eaton, Hampton conservation areas (Broad Blunsdon designated 1990), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Broad Blunsdon, Castle Eaton and Hampton those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Blunsdon and Highworth is determined against an 8-week statutory target.
Broad Blunsdon (conservation area designated in 1990), Castle Eaton (conservation area designated in 1975), Hampton (conservation area designated in 1990), Hannington (conservation area designated in 1979), Highworth (conservation area designated in 1976), Lower Blunsdon (conservation area designated in 1992), Sevenhampton (conservation area designated in 1990), Stanton Fitzwarren (conservation area designated in 1978), Upper Inglesham (conservation area designated in 1990), Castle Eaton (civil parish within Blunsdon and Highworth), Hannington (civil parish within Blunsdon and Highworth), Inglesham (civil parish within Blunsdon and Highworth), Stanton Fitzwarren (civil parish within Blunsdon and Highworth), Highworth (civil parish within Blunsdon and Highworth) and South Marston (civil parish within Blunsdon and Highworth) — these are the Blunsdon and Highworth pockets our drawings cover most. Heritage designations here include Broad Blunsdon, Castle Eaton, Hampton, Hannington, Highworth, Lower Blunsdon, Sevenhampton, Stanton Fitzwarren and Upper Inglesham. Swindon Borough Council weighs each proposal against the adopted Swindon local plan and Swindon Borough Council's design guidance for householder work, where the 5,570 homes here are 24% 1965-1972, 20% 1973-1982, 12% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow-pitched roofs and integral garages typical of that period's building and shallow trussed roofs typical of 1970s building, over late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%).
Blunsdon and Highworth's designated heritage is specific, and it is the first thing we check against your address: Broad Blunsdon (conservation area designated in 1990), Castle Eaton (conservation area designated in 1975), Hampton (conservation area designated in 1990), Hannington (conservation area designated in 1979), Highworth (conservation area designated in 1976), Lower Blunsdon (conservation area designated in 1992), Sevenhampton (conservation area designated in 1990), Stanton Fitzwarren (conservation area designated in 1978) and Upper Inglesham (conservation area designated in 1990). Inside those boundaries permitted development is curtailed and Swindon Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Blunsdon and Highworth takes in Castle Eaton, Hannington, Inglesham, Stanton Fitzwarren, Highworth and South Marston. No Article 4 direction is recorded for Swindon Borough Council, but Blunsdon and Highworth's 9 conservation areas still limit permitted development on those streets.
On stock, Blunsdon and Highworth is late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%) — which is why shallow-pitched roofs and integral garages typical of that period's building and shallow trussed roofs typical of 1970s building govern what a loft or rear projection can realistically be. Swindon Borough Council decided 436 householder applications in the latest published year and granted 91%, with 92% issued inside the eight-week target. Those are the numbers our drawings are prepared against.
The full build-period split for Blunsdon and Highworth runs pre-1900 12% (660 homes), 1900-1918 1% (70 homes), 1919-1929 1% (50 homes), 1930-1939 3% (150 homes), 1945-1954 9% (480 homes), 1955-1964 8% (470 homes), 1965-1972 24% (1,330 homes), 1973-1982 20% (1,100 homes), 1983-1992 6% (320 homes), 1993-1999 2% (130 homes) and 2000-2008 3% (160 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Swindon Borough Council also decides for Central, Chiseldon and Lawn, Eastcott, Mannington and Western, Old Town, Ridgeway, Rodbourne Cheney and St Andrews, so a decision in Blunsdon and Highworth sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Blunsdon and Highworth and Swindon Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Blunsdon and Highworth |
|---|---|
| Dwellings recorded | 5,570 |
| Built pre-1900 | 660 (12%) |
| Built 1900-1918 | 70 (1%) |
| Built 1919-1929 | 50 (1%) |
| Built 1930-1939 | 150 (3%) |
| Built 1945-1954 | 480 (9%) |
| Built 1955-1964 | 470 (8%) |
| Built 1965-1972 | 1,330 (24%) |
| Built 1973-1982 | 1,100 (20%) |
| Built 1983-1992 | 320 (6%) |
| Built 1993-1999 | 130 (2%) |
| Built 2000-2008 | 160 (3%) |
| Built before 1919 | 13% |
| Built 1919–1939 | 4% |
| Built 1945–2008 | 72% |
| Conservation areas in Blunsdon and Highworth | 9 (Broad Blunsdon, Castle Eaton…) |
| Conservation areas district-wide | 28 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 436 |
| Householder applications granted | 91% |
| Decided within 8 weeks | 92% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Swindon Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Blunsdon and Highworth's roofs set the brief. The borough is built largely from late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%), and its lofts sit under shallow-pitched roofs and integral garages typical of that period's building and shallow trussed roofs typical of 1970s building — the geometry that decides whether a rear dormer, a hip-to-gable or a mansard gives you the headroom you want. Swindon Borough Council assesses loft proposals against the adopted Swindon local plan and Swindon Borough Council's design guidance for householder work, and its case officers read each roof against the pair next door and the wider street before they read the plans.
That makes drawing quality decisive. We measure ridge and eaves heights, roof pitch and the existing stair, calculate the added volume against the permitted-development limits exactly, and show the workings on the drawings so Swindon Borough Council can verify them. Blunsdon and Highworth contains Broad Blunsdon, Castle Eaton, Hampton conservation areas (Broad Blunsdon designated 1990), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the page rather than leave it for the case officer to raise.
Blunsdon and Highworth also carries protected streets — Broad Blunsdon, Castle Eaton, Hampton, Hannington, Highworth, Lower Blunsdon, Sevenhampton, Stanton Fitzwarren and Upper Inglesham among them. No Article 4 direction is recorded for Swindon Borough Council, but Blunsdon and Highworth's 9 conservation areas still limit permitted development on those streets. We check your address against those designations before a line is drawn.
Many Blunsdon and Highworth loft conversions proceed without planning permission — a rear dormer within the permitted-development volume limits (40 cubic metres on a terrace, 50 on a semi or detached house) is usually lawful. You will normally need a full application to Swindon Borough Council if any of these apply:
We draw the roof line, the ridge height and the neighbour's daylight on the page — the relationships Swindon Borough Council's officers check first — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Swindon Borough Council's real householder decision record, pulled from official planning statistics and updated as new data lands. Swindon Borough Council granted 91% of its householder applications in the year to 31 March 2026, and Broad Blunsdon shapes what is approved here. Professionally prepared loft drawings anticipate those pressure points before submission, which is why complete, policy-literate packs are decided faster and refused less often than DIY applications.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Broad Blunsdon, Castle Eaton and Hampton, the recurring loft is the rear dormer — a box across the back roof slope that turns a cramped attic into a full-height double bedroom and en-suite. On shallow-pitched roofs and integral garages typical of that period's building, that is usually the most efficient use of the roof; where the stock is shallow trussed roofs typical of 1970s building, a hip-to-gable followed by a rear dormer unlocks far more space, though it needs a full application.
The 5,570 homes here are 24% 1965-1972, 20% 1973-1982, 12% pre-1900, which is what sets the realistic roof and rear-projection options. We draw the dormer inside the volume allowance, keep the flat-roof build-up below the ridge, and set the face back from the eaves as the rules require — so the pack answers Swindon Borough Council's questions before they are asked. Where permitted-development rights are exhausted or removed, we prepare a householder application composed to the borough's roof-alteration guidance instead.
We draw loft conversions on every street in the borough. A few of the neighbourhoods where Blunsdon and Highworth roofs come up most often:
Loft conversion drawings for Broad Blunsdon's conservation area designated in 1990 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
Loft conversion drawings for Castle Eaton's conservation area designated in 1975 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
Loft conversion drawings for Hampton's conservation area designated in 1990 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
Loft conversion drawings for Hannington's conservation area designated in 1979 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
Loft conversion drawings for Highworth's conservation area designated in 1976 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
Loft conversion drawings for Lower Blunsdon's conservation area designated in 1992 — measured, volume-checked and drawn to Swindon Borough Council's guidance.
The right loft in Blunsdon and Highworth depends on your roof. This is how the main types compare on planning route and the space they add.
| Loft type | Permitted development? | Space & headroom | What Swindon Borough Council checks |
|---|---|---|---|
| Rear dormer | Usually yes, within volume limits | Full-height double room at the back | Volume, set-back from eaves, ridge height |
| Hip-to-gable | No — full application | Extends the whole side of the roof | Roof bulk and the symmetry of the pair |
| Mansard | No — full application | Maximum floor area across the roof | Street character, especially in conservation areas |
| Rooflights only | Usually yes (Class C) | Light and headroom, no extra footprint | Whether rooflights sit within the existing slope |
Route depends on your street — conservation areas such as Broad Blunsdon and Castle Eaton and Article 4 directions can remove permitted-development rights.
A fixed process built around how Swindon Borough Council validates and decides householder loft applications — most drawings are submission-ready within seven days of survey.
Tell us your Blunsdon and Highworth postcode and roof type. We confirm your conservation and Article 4 status, how much permitted-development volume you have left, and score your odds against live Swindon Borough Council decisions.
We measure ridge and eaves heights, roof pitch, joist levels and the existing stair — the numbers the volume calculation and head heights depend on.
Chartered designers develop the dormer, hip-to-gable or mansard to your brief, drawn inside the Class B limits or to Swindon Borough Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Swindon Borough Council issues its decision.
Often not. A rear dormer within 40 cubic metres on a terrace, or 50 on a semi-detached or detached house, set back from the eaves and no higher than the ridge, is usually permitted development. In Blunsdon and Highworth the main exceptions are hip-to-gable conversions, dormers visible from the highway, and homes in conservation areas such as Broad Blunsdon and Castle Eaton or on streets with an Article 4 direction. Swindon Borough Council is the decision-maker.
Generally no. In conservation areas including Broad Blunsdon and Castle Eaton, Class B permitted-development rights for lofts are removed, so a rear dormer that would be lawful elsewhere needs a full application to Swindon Borough Council. No Article 4 direction is recorded for Swindon Borough Council, but Blunsdon and Highworth's 9 conservation areas still limit permitted development on those streets. We check your exact address before drawing.
On shallow-pitched roofs and integral garages typical of that period's building, common across Blunsdon and Highworth, a rear dormer is usually the most efficient conversion and often permitted development. Where the roof is shallow trussed roofs typical of 1970s building, a hip-to-gable followed by a rear dormer gains far more usable space but needs planning permission. Our survey confirms which your roof supports before we draw. Swindon Borough Council is the decision-maker.
A householder planning application in Blunsdon and Highworth runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though validation can add time if the pack is incomplete. We submit validation-complete drawings and manage case-officer queries to keep the decision on track. Swindon Borough Council is the decision-maker.
If your dormer is permitted development, a lawful development certificate from Swindon Borough Council is council-stamped proof of that — worth having, because every buyer's solicitor will ask for it when you sell. We prepare and submit the certificate application with the same drawing pack. This applies to your Blunsdon and Highworth address specifically.
Every roof is different, so we quote each Blunsdon and Highworth project individually — a fixed, no-obligation price back within one working day. The quote covers the full drawing pack with free revisions until Swindon Borough Council approves, and we tell you upfront whether your loft qualifies as permitted development. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.