Single-storey, double-storey, rear and side extension drawings for Blunsdon and Highworth homes — measured to Swindon Borough Council's design guidance, delivered in days and revised free until your decision, with a free approval-odds check before you commit.
Swindon Borough Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Blunsdon and Highworth contains Broad Blunsdon, Castle Eaton, Hampton conservation areas (Broad Blunsdon designated 1990), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Broad Blunsdon, Castle Eaton and Hampton those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Blunsdon and Highworth is determined against an 8-week statutory target.
Broad Blunsdon (conservation area designated in 1990), Castle Eaton (conservation area designated in 1975), Hampton (conservation area designated in 1990), Hannington (conservation area designated in 1979), Highworth (conservation area designated in 1976), Lower Blunsdon (conservation area designated in 1992), Sevenhampton (conservation area designated in 1990), Stanton Fitzwarren (conservation area designated in 1978), Upper Inglesham (conservation area designated in 1990), Castle Eaton (civil parish within Blunsdon and Highworth), Hannington (civil parish within Blunsdon and Highworth), Inglesham (civil parish within Blunsdon and Highworth), Stanton Fitzwarren (civil parish within Blunsdon and Highworth), Highworth (civil parish within Blunsdon and Highworth) and South Marston (civil parish within Blunsdon and Highworth) — these are the Blunsdon and Highworth pockets our drawings cover most. Heritage designations here include Broad Blunsdon, Castle Eaton, Hampton, Hannington, Highworth, Lower Blunsdon, Sevenhampton, Stanton Fitzwarren and Upper Inglesham. Swindon Borough Council weighs each proposal against the adopted Swindon local plan and Swindon Borough Council's design guidance for householder work, where the 5,570 homes here are 24% 1965-1972, 20% 1973-1982, 12% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow-pitched roofs and integral garages typical of that period's building and shallow trussed roofs typical of 1970s building, over late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%).
Blunsdon and Highworth's designated heritage is specific, and it is the first thing we check against your address: Broad Blunsdon (conservation area designated in 1990), Castle Eaton (conservation area designated in 1975), Hampton (conservation area designated in 1990), Hannington (conservation area designated in 1979), Highworth (conservation area designated in 1976), Lower Blunsdon (conservation area designated in 1992), Sevenhampton (conservation area designated in 1990), Stanton Fitzwarren (conservation area designated in 1978) and Upper Inglesham (conservation area designated in 1990). Inside those boundaries permitted development is curtailed and Swindon Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Blunsdon and Highworth takes in Castle Eaton, Hannington, Inglesham, Stanton Fitzwarren, Highworth and South Marston. No Article 4 direction is recorded for Swindon Borough Council, but Blunsdon and Highworth's 9 conservation areas still limit permitted development on those streets.
On stock, Blunsdon and Highworth is late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%) — which is why shallow-pitched roofs and integral garages typical of that period's building and shallow trussed roofs typical of 1970s building govern what a loft or rear projection can realistically be. Swindon Borough Council decided 436 householder applications in the latest published year and granted 91%, with 92% issued inside the eight-week target. Those are the numbers our drawings are prepared against.
The full build-period split for Blunsdon and Highworth runs pre-1900 12% (660 homes), 1900-1918 1% (70 homes), 1919-1929 1% (50 homes), 1930-1939 3% (150 homes), 1945-1954 9% (480 homes), 1955-1964 8% (470 homes), 1965-1972 24% (1,330 homes), 1973-1982 20% (1,100 homes), 1983-1992 6% (320 homes), 1993-1999 2% (130 homes) and 2000-2008 3% (160 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Swindon Borough Council also decides for Central, Chiseldon and Lawn, Eastcott, Mannington and Western, Old Town, Ridgeway, Rodbourne Cheney and St Andrews, so a decision in Blunsdon and Highworth sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Blunsdon and Highworth and Swindon Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Blunsdon and Highworth |
|---|---|
| Dwellings recorded | 5,570 |
| Built pre-1900 | 660 (12%) |
| Built 1900-1918 | 70 (1%) |
| Built 1919-1929 | 50 (1%) |
| Built 1930-1939 | 150 (3%) |
| Built 1945-1954 | 480 (9%) |
| Built 1955-1964 | 470 (8%) |
| Built 1965-1972 | 1,330 (24%) |
| Built 1973-1982 | 1,100 (20%) |
| Built 1983-1992 | 320 (6%) |
| Built 1993-1999 | 130 (2%) |
| Built 2000-2008 | 160 (3%) |
| Built before 1919 | 13% |
| Built 1919–1939 | 4% |
| Built 1945–2008 | 72% |
| Conservation areas in Blunsdon and Highworth | 9 (Broad Blunsdon, Castle Eaton…) |
| Conservation areas district-wide | 28 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 436 |
| Householder applications granted | 91% |
| Decided within 8 weeks | 92% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Swindon Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Blunsdon and Highworth homes come in a handful of recurring shapes, and each one points to a different extension. The borough is built largely from late-1960s and early-1970s houses (24% of 5,570 homes), 1970s and early-1980s houses (20%) and Victorian and earlier houses (12%), so a Victorian terrace usually wants a rear or side-return infill, while an interwar semi has room for a wider single-storey wrap or a two-storey side addition. Swindon Borough Council judges every one of them against the adopted Swindon local plan and Swindon Borough Council's design guidance for householder work, weighing footprint, height and the impact on the house next door before it looks at the elevations.
That is why the drawings decide the outcome. We set the extension depth against the permitted-development limits precisely, keep the eaves and ridge within the allowances, and plot the 45-degree daylight lines to the neighbours' windows so the case officer can see the amenity test is passed. Blunsdon and Highworth contains Broad Blunsdon, Castle Eaton, Hampton conservation areas (Broad Blunsdon designated 1990), so materials, fenestration and roof form are assessed against the appraisal, so we design around it from the first sketch rather than discover it at validation.
Blunsdon and Highworth also protects whole streets — Broad Blunsdon, Castle Eaton, Hampton, Hannington, Highworth, Lower Blunsdon, Sevenhampton, Stanton Fitzwarren and Upper Inglesham among them. No Article 4 direction is recorded for Swindon Borough Council, but Blunsdon and Highworth's 9 conservation areas still limit permitted development on those streets. On designated land the larger-home extension route and most side extensions stop being permitted development, so we confirm your address against those layers before drawing a line.
Plenty of Blunsdon and Highworth extensions are permitted development and need no planning application — a single-storey rear extension within the depth and height limits is the common case. You will normally need to apply to Swindon Borough Council if any of these apply:
We draw the footprint, the ridge and eaves heights and the neighbours' daylight on the page — the relationships Swindon Borough Council's officers weigh first — and submit a validation-complete pack, whether that is a lawful development certificate, a prior-approval notification or a full householder application.
Below is Swindon Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Swindon Borough Council granted 91% of its householder applications in the year to 31 March 2026, and Broad Blunsdon shapes what is approved here. A complete, policy-literate extension pack anticipates those pressure points before submission, which is why professionally drawn applications are decided faster and refused less often than DIY ones.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Broad Blunsdon, Castle Eaton and Hampton, the extension that lands most often is the single-storey rear addition — a glazed kitchen-diner across the back of the house, kept within the permitted-development depth or taken to a full application where the ground floor wants more. On the borough's late-1960s and early-1970s houses (24% of 5,570 homes), a side-return infill frequently pairs with it to square off the plan; on wider victorian and earlier houses (12%), a two-storey side or rear extension can add a bedroom above without swallowing the garden.
The 5,570 homes here are 24% 1965-1972, 20% 1973-1982, 12% pre-1900, which is what sets the realistic roof and rear-projection options. We size the extension to the amenity and daylight tests, match the roof and materials to the host house, and keep enough garden to satisfy Swindon Borough Council's space standards — so the scheme answers the borough's questions before an objection can raise them. Where permitted-development rights are used up or removed, we prepare the householder application to the council's extension design guidance instead.
We draw extensions on every street in the borough. A few of the neighbourhoods where Blunsdon and Highworth projects come up most often:
Extension drawings for Broad Blunsdon's conservation area designated in 1990 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
Extension drawings for Castle Eaton's conservation area designated in 1975 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
Extension drawings for Hampton's conservation area designated in 1990 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
Extension drawings for Hannington's conservation area designated in 1979 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
Extension drawings for Highworth's conservation area designated in 1976 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
Extension drawings for Lower Blunsdon's conservation area designated in 1992 — footprint-checked, daylight-tested and drawn to Swindon Borough Council's guidance.
The right extension in Blunsdon and Highworth depends on your house type and how much garden you can give up. This is how the main options compare on planning route and what they add.
| Extension type | Permitted development? | What it adds | What Swindon Borough Council checks |
|---|---|---|---|
| Single-storey rear | Often, within 3m/4m depth (6m/8m via prior approval) | Bigger kitchen-diner across the back | Depth, height, neighbour daylight (45°) |
| Side-return infill | Sometimes, if within width and height limits | Squares off an L-shaped ground floor | Width vs the original house, glazing to boundary |
| Two-storey rear/side | No — full application | Extra bedroom or bathroom above | Bulk, overlooking, 7m rear-boundary gap |
| Wraparound (rear + side) | No — full application | Whole-width open-plan ground floor | Combined footprint and garden retained |
Route depends on your street — conservation areas such as Broad Blunsdon and Castle Eaton and Article 4 directions can remove permitted-development rights.
A fixed process built around how Swindon Borough Council validates and decides householder extension applications — most drawings are submission-ready within seven days of survey.
Tell us your Blunsdon and Highworth postcode and house type. We confirm your conservation and Article 4 status, how much permitted-development depth you have left, and score your odds against live Swindon Borough Council decisions.
We measure the existing footprint, floor and eaves levels, boundary distances and the neighbours' window positions — the numbers the depth limits and daylight tests depend on.
Chartered designers develop the single-storey, two-storey or side extension to your brief, drawn inside the permitted-development limits or to Swindon Borough Council's extension design guidance.
We submit the certificate, prior-approval notice or application, manage validation and case-officer queries, and revise the drawings free until Swindon Borough Council issues its decision.
Not always. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development. In Blunsdon and Highworth you will need to apply to Swindon Borough Council for two-storey extensions, side extensions wider than half the house, anything forward of the front wall, deeper rear extensions under the larger-home prior-approval route, and any extension in a conservation area such as Broad Blunsdon and Castle Eaton.
Standard permitted development allows 3 metres on a terraced or semi-detached house and 4 metres on a detached one. The larger-home extension scheme can double that to 6 or 8 metres, but it needs a prior-approval notification to Swindon Borough Council and a neighbour-consultation period, and it does not apply on designated land such as Blunsdon and Highworth's conservation areas. We confirm which route your property qualifies for before drawing.
Two-storey and double-storey extensions almost always need a full householder application to Swindon Borough Council, because they fall outside permitted development on most homes. The council looks closely at bulk, overlooking of neighbours and the 7-metre gap a two-storey rear extension must keep from the rear boundary. We design to those tests and show the daylight and privacy angles on the drawings. This applies to your Blunsdon and Highworth address specifically.
A householder planning application in Blunsdon and Highworth runs to a statutory eight-week target, a larger-home prior-approval notification to around six weeks including the neighbour-consultation period, and a lawful development certificate to eight weeks. Incomplete submissions stall at validation, so we submit a complete pack and manage officer queries to keep the decision on schedule. Swindon Borough Council is the decision-maker.
Yes — planning permission and building regulations are separate consents, and almost every extension needs both. Planning governs whether you can build it; building control governs how it is built, covering structure, insulation, drainage and fire safety. We prepare the building-regulations drawings alongside the planning set so Swindon Borough Council's building control or an approved inspector can sign the work off. This applies to your Blunsdon and Highworth address specifically.
Every house and brief is different, so we price each Blunsdon and Highworth extension individually and send a fixed, no-obligation quote back within one working day. It covers the full drawing pack with free revisions until Swindon Borough Council approves, and we tell you upfront whether your extension qualifies as permitted development. Call 020 7864 7245 to get started.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.