MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Listed building consent drawings in Stour & Allen Vale — historic building fabric recorded before alteration
Stour & Allen Vale · Listed Building Consent

Listed building consent drawings in Stour & Allen Vale

Listed building consent drawings for Stour & Allen Vale — measured as existing, proposed in the same detail, and supported by a heritage statement that answers Dorset Council's conservation officer on the terms the 1990 Act actually sets.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Stour & Allen Vale planning decisions and design rules

Dorset Council granted 95% of the householder planning decisions it made in its latest published year — 8 points above the 87% England-wide householder average. Stour & Allen Vale contains Almer Conservation Area, Hinton Martell Conservation Area, Horton Conservation Area conservation areas (Almer Conservation Area designated 1992), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Stour & Allen Vale carries at least one Article 4 direction, and conservation areas including Almer Conservation Area, Hinton Martell Conservation Area and Horton Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Stour & Allen Vale is determined against an 8-week statutory target.

Almer (conservation area designated in 1992), Hinton Martell (conservation area designated in 1978), Horton (conservation area designated in 1990), Mapperton (conservation area designated in 1992), Pamphill (conservation area designated in 1987), Shapwick (conservation area designated in 1978), Sturminster Marshall (conservation area designated in 1987), Shapwick (civil parish within Stour & Allen Vale), Sturminster Marshall (civil parish within Stour & Allen Vale), Chalbury (civil parish within Stour & Allen Vale), Horton (civil parish within Stour & Allen Vale), Hinton (civil parish within Stour & Allen Vale) and Holt (civil parish within Stour & Allen Vale) — these are the Stour & Allen Vale pockets our drawings cover most. Heritage designations here include Almer Conservation Area, Hinton Martell Conservation Area, Horton Conservation Area, Mapperton Conservation Area, Pamphill Conservation Area, Shapwick Conservation Area and Sturminster Marshall Conservation Area. Dorset Council weighs each proposal against Dorset Council's adopted local plan and its householder design guidance, where the 2,110 homes here are 24% pre-1900, 9% 1945-1954, 8% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and simple gabled and hipped roofs typical of early postwar building, over Victorian and earlier houses (24% of 2,110 homes), early postwar houses (9%) and late-1950s and early-1960s houses (8%).

Why a Stour & Allen Vale scheme is judged on Stour & Allen Vale terms

What is permitted in Stour & Allen Vale turns on designation first, so that is where we start: Almer (conservation area designated in 1992), Hinton Martell (conservation area designated in 1978), Horton (conservation area designated in 1990), Mapperton (conservation area designated in 1992), Pamphill (conservation area designated in 1987), Shapwick (conservation area designated in 1978) and Sturminster Marshall (conservation area designated in 1987). Inside those boundaries permitted development is curtailed and Dorset Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Stour & Allen Vale takes in Shapwick, Sturminster Marshall, Chalbury, Horton, Hinton and Holt. Dorset Council has 77 recorded Article 4 directions — check the address before assuming PD applies in Stour & Allen Vale.

On stock, Stour & Allen Vale is Victorian and earlier houses (24% of 2,110 homes), early postwar houses (9%) and late-1950s and early-1960s houses (8%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and simple gabled and hipped roofs typical of early postwar building govern what a loft or rear projection can realistically be. Dorset Council decided 1,261 householder applications in the latest published year and granted 95%, with 78% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Stour & Allen Vale runs pre-1900 24% (510 homes), 1900-1918 3% (70 homes), 1919-1929 2% (50 homes), 1930-1939 5% (110 homes), 1945-1954 9% (180 homes), 1955-1964 8% (170 homes), 1965-1972 6% (120 homes), 1973-1982 7% (150 homes), 1983-1992 8% (170 homes), 1993-1999 8% (170 homes) and 2000-2008 5% (100 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Dorset Council also decides for Beacon, Beaminster, Blackmore Vale, Blandford, Chalk Valleys, Charminster St Mary's, Chickerell and Cranborne & Alderholt, so a decision in Stour & Allen Vale sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include 1-3 The Lane, Kingston, Corfe Castle, 10 Cornwall Road, Swanage, 6 Burlington Road, Swanage and Avon Castle & Matchams Park Estate. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Stour & Allen Vale by the published data

Published figures for Stour & Allen Vale and Dorset Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureStour & Allen Vale
Dwellings recorded2,110
Built pre-1900510 (24%)
Built 1900-191870 (3%)
Built 1919-192950 (2%)
Built 1930-1939110 (5%)
Built 1945-1954180 (9%)
Built 1955-1964170 (8%)
Built 1965-1972120 (6%)
Built 1973-1982150 (7%)
Built 1983-1992170 (8%)
Built 1993-1999170 (8%)
Built 2000-2008100 (5%)
Built before 191927%
Built 1919–19398%
Built 1945–200850%
Conservation areas in Stour & Allen Vale7 (Almer Conservation Area, Hinton Martell Conservation Area…)
Conservation areas district-wide311
Article 4 directions recorded77
Householder applications decided1,261
Householder applications granted95%
Decided within 8 weeks78%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Dorset Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What consent actually protects in a Stour & Allen Vale listed building

Listing protects the whole building, not the front elevation. Removing a partition, replacing a staircase balustrade, changing a floor finish, or lining a wall with insulation are all alterations to special interest, and all can require consent. That surprises owners far more often than the external rules do — and it is why the first deliverable on a listed project is an accurate record of what is there, not a proposal for what replaces it.

Stour & Allen Vale sits within an area of Victorian and earlier houses (24% of 2,110 homes), early postwar houses (9%) and late-1950s and early-1960s houses (8%), and its designated heritage includes Almer Conservation Area, Hinton Martell Conservation Area, Horton Conservation Area, Mapperton Conservation Area, Pamphill Conservation Area, Shapwick Conservation Area and Sturminster Marshall Conservation Area. Conservation-area designation and listing are different things and frequently overlap: a listed house inside a conservation area needs consent for internal work under the listing, and is judged on its contribution to the wider area under the designation. We establish both before proposing anything.

Section 16(2) of the 1990 Act requires Dorset Council to have special regard to the desirability of preserving the building, its setting and any features of special architectural or historic interest. In practice that means the drawings must show what is being lost as clearly as what is being gained, and the case for the intervention must be made on heritage terms rather than on convenience.

Survey drawing of listed building fabric in Stour & Allen Vale

When do you need listed building consent in Stour & Allen Vale?

Consent from Dorset Council is required for works affecting special interest. That commonly includes:

  • Removing, altering or forming internal walls, doorways or staircases
  • Replacing windows or doors, including like-for-like where detail changes
  • Re-roofing in a different material, or altering chimneys
  • Internal insulation, damp treatment or re-plastering in historic fabric
  • New services routed through historic fabric — heating, wiring, ventilation
  • Works to curtilage structures such as walls, outbuildings and railings
  • Demolition of any part of the building, however small
  • Signage, external lighting or satellite equipment fixed to the building

Stour & Allen Vale heritage decisions — live from council data

Below is Dorset Council's real decision record, drawn from official planning statistics and refreshed as new data lands. Dorset Council granted 95% of its householder applications in the year to 31 March 2026, and Almer Conservation Area shapes what is approved here. Listed applications are decided on the quality of the record and the justification, which is where most refusals actually originate.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

95%householder applications approved in Dorset
87%national average — Dorset is 8 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What gets consented on listed buildings in Stour & Allen Vale

Across Almer, Hinton Martell and Horton, the schemes that get consent tend to be reversible, legible and honest: new work that reads as new rather than as imitation, services routed in existing chases rather than cut into original fabric, and interventions concentrated in later or lower-significance parts of the building. Rear additions in a contemporary idiom are often accepted where a pastiche extension is refused.

Stour & Allen Vale contains Almer Conservation Area, Hinton Martell Conservation Area, Horton Conservation Area conservation areas (Almer Conservation Area designated 1992), so materials, fenestration and roof form are assessed against the appraisal. Where planning permission is needed as well — for an extension, say — the two applications run in parallel and are usually determined together. We prepare them as a single coordinated set so the heritage case and the planning case do not contradict each other, which is a surprisingly common reason for a refusal on an otherwise sound scheme.

Listed building consent drawing pack for a property in Stour & Allen Vale

Listed building work across Stour & Allen Vale

We prepare listed building consent packs across Stour & Allen Vale. A few of the areas where heritage work comes up most often:

Almer

Listed building consent drawings for Almer — conservation area designated in 1992 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Hinton Martell

Listed building consent drawings for Hinton Martell — conservation area designated in 1978 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Horton

Listed building consent drawings for Horton — conservation area designated in 1990 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Mapperton

Listed building consent drawings for Mapperton — conservation area designated in 1992 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Pamphill

Listed building consent drawings for Pamphill — conservation area designated in 1987 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Shapwick

Listed building consent drawings for Shapwick — conservation area designated in 1978 — surveyed as existing and drawn to the detail Dorset Council's conservation officer needs.

Listed building consent or planning permission in Stour & Allen Vale?

They are separate consents with different tests, and many projects need both.

ConsentWhat it coversFeeConsequence of proceeding without it
Listed building consentWorks affecting special interest, internal and externalNoneCriminal offence under section 9 of the 1990 Act
Planning permissionDevelopment — extensions, outbuildings, use changesPayableEnforcement action; may become immune after 10 years
Conservation area consent contextDemolition and character in a designated areaVariesEnforcement; prosecution for unauthorised demolition
Building regulationsStructure, fire, insulation, ventilationPayableEnforcement notice; problems on sale

Sources: Planning (Listed Buildings and Conservation Areas) Act 1990, sections 7, 9 and 16(2); Town and Country Planning Act 1990.

Four steps to consent on a Stour & Allen Vale listed building

A process built around what a conservation officer actually assesses.

  1. 1

    Free initial check

    Send us the address and the listing entry. We confirm grade, what the listing covers, whether curtilage structures are caught, and how Dorset Council has treated comparable schemes.

  2. 2

    Measured record of the building

    We survey as existing in real detail — plans, elevations, sections and the features that carry the significance — because a proposal cannot be assessed against a record that does not exist.

  3. 3

    Proposal & heritage statement

    We draw the proposal in matching detail and write the heritage statement that identifies significance, impact and justification in the terms section 16(2) requires.

  4. 4

    Submission & follow-through

    We submit to Dorset Council, engage with the conservation officer, and revise the drawings free until the decision is issued.

Frequently asked questions

Do I need listed building consent for internal work in Stour & Allen Vale?

Frequently, yes. Listing covers the whole building, so removing a partition, altering a staircase, replacing joinery or re-plastering historic surfaces can all require consent from Dorset Council. There is no internal exemption and no size threshold. The safe route is to establish what is significant before work is designed, which is what the measured survey is for. This applies to your Stour & Allen Vale address specifically.

What happens if work is done without listed building consent in Stour & Allen Vale?

Carrying out unauthorised works to a listed building is a criminal offence under section 9 of the Planning (Listed Buildings and Conservation Areas) Act 1990, and it does not become lawful with the passage of time the way some planning breaches do. Dorset Council can require reinstatement. Where work has already happened, an application for retrospective consent is usually the right first step, and we can advise on it. This applies to your Stour & Allen Vale address specifically.

Is there a fee for listed building consent in Stour & Allen Vale?

No. Listed building consent applications carry no application fee, which sometimes leads owners to assume the process is lighter than a planning application. It is not — the evidence expected is greater, because the decision rests on the effect on special interest rather than on amenity, and an under-documented submission is the most common cause of delay. This applies to your Stour & Allen Vale address specifically. Dorset Council is the decision-maker.

Do I need planning permission as well as listed building consent in Stour & Allen Vale?

If the work is also development — an extension, an outbuilding, a change of use — then yes, and the two applications run in parallel to Dorset Council. Internal alterations usually need only listed building consent. Where both are required we prepare them as one coordinated set, because inconsistencies between the two submissions are a recurring reason for delay. This applies to your Stour & Allen Vale address specifically.

Can I replace the windows in a listed building in Stour & Allen Vale?

Sometimes, but rarely with modern units. Historic windows are often the single most significant surviving feature, and replacement is judged on the condition of the existing joinery and the accuracy of what replaces it — glazing bar profile, glass type, opening method and reveal depth all matter. Repair and secondary glazing are usually the route that gains consent, particularly inside designated areas such as Almer Conservation Area and Hinton Martell Conservation Area. This applies to your Stour & Allen Vale address specifically. Dorset Council is the decision-maker.

How long does listed building consent take in Stour & Allen Vale?

The statutory target is eight weeks from validation for most applications, and thirteen for larger schemes. In practice the timetable is set by how complete the submission is: a conservation officer who has to ask what the existing fabric looks like will take longer than one who can see it. We submit a record that answers those questions upfront. This applies to your Stour & Allen Vale address specifically. Dorset Council is the decision-maker.

How much do listed building drawings in Stour & Allen Vale cost?

We quote each Stour & Allen Vale listed project individually, because the survey effort depends entirely on the building's complexity and how much of the fabric the work touches, and send a fixed, no-obligation quote within one working day. It covers survey, drawings and heritage statement, with free revisions until Dorset Council decides. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Listed building consent drawings across Dorset

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Stour & Allen Vale