The fast route to a deep single-storey rear extension in Richmond upon Thames — up to 6 metres on an attached house or 8 on a detached one — via Richmond upon Thames Council's prior approval scheme rather than a full planning application.
Richmond upon Thames Council granted 86% of the householder planning decisions it made in its latest published year — 1 point below the 87% England-wide householder average. The borough's exceptional conservation coverage means design detail and materials are scrutinised closely, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837), Victorian (1837–1901), Edwardian (1901–1910) and interwar (1918–1939) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Richmond upon Thames carries at least one Article 4 direction, and conservation areas including Richmond Green, Twickenham Riverside and Kew Green remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Richmond upon Thames is determined against an 8-week statutory target.
Richmond (Georgian and Victorian houses around Richmond Green), Twickenham (riverside conservation streets and Edwardian terraces), Kew (Victorian houses around Kew Green), Teddington (Edwardian terraces and villas), East Sheen (Edwardian family houses near Sheen Common) and Ham (period cottages and houses by Ham Common) — these are the Richmond upon Thames pockets our drawings cover most. Heritage designations here include Richmond Green, Twickenham Riverside, Kew Green, Ham Common and East Sheen (Sheen Common). Richmond upon Thames Council weighs each proposal against Richmond Local Plan and the House Extensions and External Alterations SPD, where roof alterations and dormers visible from the street or river are strongly resisted. On roofs the borough is pitched roofs on the villas and butterfly roofs on the terraces, over Victorian and Edwardian villas and terraces, Georgian houses near the river and interwar semis in the outer wards.
The ordinary Class A limits stop a single-storey rear extension at 3 metres on an attached house and 4 on a detached one. The larger home extension scheme doubles both, on condition that the council is told first. That notification is not an application for permission — the council cannot refuse on design, materials or policy grounds. It can only consider the effect on the amenity of adjoining premises, and only if a neighbour actually objects during the 21-day consultation.
The other conditions still apply and are strict: single storey only, no higher than 4 metres, eaves no higher than the existing eaves, and no more than half the land around the original house covered. It is not available on designated land, so a house in a conservation area such as Richmond Green and Twickenham Riverside cannot use it at all. Materials must be similar to the existing house, and the extension must not include a veranda, balcony or raised platform.
Richmond upon Thames is largely Victorian and Edwardian villas and terraces, Georgian houses near the river and interwar semis in the outer wards. The borough's exceptional conservation coverage means design detail and materials are scrutinised closely, which matters here because an objecting neighbour puts amenity squarely in front of a case officer. Richmond is one of London's most conservation-heavy boroughs, with widespread Article 4 directions — on many streets even minor external alterations that would be permitted development elsewhere need a full application.
The scheme is available where all of these hold. Fail any one and it is a full application to Richmond upon Thames Council instead:
We prepare the notification pack Richmond upon Thames Council needs — plans, elevations, a site plan with the adjoining owners identified — and manage the 21-day neighbour consultation so the 42-day clock is not restarted by an incomplete submission.
Below is Richmond upon Thames Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Richmond grants a fair share of householder applications, but its dense conservation-area and Article 4 coverage makes design quality and roof visibility decisive. Prior approval turns on neighbour amenity alone, so the drawings that matter are the ones showing the relationship to the boundary.
Source: MHCLG planning application statistics (householder decisions, rolling year). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Richmond, Twickenham and Kew, the notifications that clear without objection are the ones that treat the neighbour as the audience. We show the extension in section against the boundary, demonstrate the 45-degree daylight relationship to the nearest habitable window, and where the plot is tight we taper the depth away from the boundary rather than running the full 6 metres to the fence.
Roof alterations and dormers visible from the street or river are strongly resisted. Where an objection does arrive, the council's assessment is narrow: loss of light, outlook and overbearing effect on the adjoining property, nothing else. A pack that has already answered those three points on the drawings usually survives an objection, whereas one that leaves them to the officer's imagination usually does not.
We prepare prior-approval notifications across Richmond upon Thames. A few of the areas where deep rear extensions come up most often:
Prior approval drawings for Richmond — Georgian and Victorian houses around Richmond Green — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Prior approval drawings for Twickenham — riverside conservation streets and Edwardian terraces — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Prior approval drawings for Kew — Victorian houses around Kew Green — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Prior approval drawings for Teddington — Edwardian terraces and villas — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Prior approval drawings for East Sheen — Edwardian family houses near Sheen Common — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Prior approval drawings for Ham — period cottages and houses by Ham Common — dimensioned to the 6m and 8m limits and prepared for Richmond upon Thames Council's neighbour consultation.
Same extension, two routes, very different tests.
| Route | Depth allowed | What the council may consider | Timescale |
|---|---|---|---|
| Ordinary Class A permitted development | 3m attached / 4m detached | Nothing — no application needed | Immediate |
| Larger home extension prior approval | 6m attached / 8m detached | Amenity of adjoining premises, only if a neighbour objects | 21-day consultation, 42-day determination |
| Full householder application | No fixed limit | Design, materials, policy, amenity, everything | 8-week target |
| Any of these on designated land | 3m / 4m only | Prior approval scheme unavailable | Full application beyond the limits |
Limits and procedure from the GPDO 2015, Schedule 2, Part 1, Class A and paragraph A.4, made permanent by amendment in 2019.
A process built around the 21-day consultation, which is where these schemes are won or lost.
Send us your Richmond upon Thames postcode and house type. We confirm whether the property is on designated land, whether the scheme is available, and what depth you can realistically take.
We measure the original rear wall, eaves height, boundary distances and the neighbouring windows that the amenity assessment will turn on.
We draw the extension to the 6m or 8m limit with the boundary relationship shown in section, and prepare the written description and adjoining-owner details Richmond upon Thames Council needs to start the consultation.
We submit, track the 21-day consultation and the 42-day determination, respond to any objection on amenity grounds, and revise free until the decision.
Three metres on a terraced or semi-detached house and four on a detached one under ordinary permitted development. Under the larger home extension prior approval scheme those double to six and eight metres, provided you notify Richmond upon Thames Council before starting and the conditions on height, materials and land coverage are met. The scheme is not available on designated land.
It is a notification, not an application for permission. You tell Richmond upon Thames Council what you intend to build, it writes to the adjoining owners, and they have 21 days to object. If nobody objects, you may build. If someone does, the council assesses the effect on the amenity of adjoining premises and must decide within 42 days. Design and policy are not in scope.
The council then considers the impact on the amenity of the adjoining property — loss of light, loss of outlook, and overbearing effect — and nothing else. It cannot refuse because it dislikes the design or the materials. We prepare the drawings so those three questions are already answered in section and on the site plan, which is what usually carries an objected scheme through. This applies to your Richmond upon Thames address specifically. Richmond upon Thames Council is the decision-maker.
No. The larger home extension scheme is unavailable on designated land, which includes conservation areas such as Richmond Green and Twickenham Riverside, national landscapes, national parks and world heritage sites. On those properties the ordinary 3-metre and 4-metre limits apply, and anything deeper needs a full householder application to Richmond upon Thames Council.
Twenty-one days for the neighbour consultation, and a maximum of 42 days from a valid submission for the council to determine it. If the council does not respond within 42 days you may proceed as notified. That deadline is the scheme's real advantage over a full application, and it is why validation completeness matters so much. This applies to your Richmond upon Thames address specifically. Richmond upon Thames Council is the decision-maker.
Yes — always. Prior approval deals only with the planning position. A 6-metre rear extension still needs building control approval for foundations, structure, drainage, thermal performance and fire safety, and the beam over the opening into the existing house needs designing and calculating. We prepare both sets so the notified scheme is the buildable one. This applies to your Richmond upon Thames address specifically. Richmond upon Thames Council is the decision-maker.
We quote each Richmond upon Thames scheme individually, because plot shape and the boundary relationship drive the work, and send a fixed, no-obligation quote within one working day. It covers the notification pack and free revisions until Richmond upon Thames Council determines it. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.