MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Two storey extension plans in Danby & Mulgrave — a two-storey rear addition to a family house
Danby & Mulgrave · Two Storey Extension Drawings

Two storey extension plans in Danby & Mulgrave

Two-storey extension drawings for Danby & Mulgrave homes — bedroom above, living space below, drawn against the 3-metre projection and 7-metre boundary rules and to North Yorkshire Council's design guidance, delivered in days and revised free until your decision.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Danby & Mulgrave householder planning by the numbers

North Yorkshire Council granted 94% of the householder planning decisions it made in its latest published year — 7 points above the 87% England-wide householder average. Danby & Mulgrave contains Sandsend, Sandsend conservation areas (Sandsend designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Sandsend and Sandsend those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Danby & Mulgrave is determined against an 8-week statutory target.

Sandsend (conservation area designated in 1974), Sandsend (conservation area designated in 1974), Barnby (civil parish within Danby & Mulgrave), Borrowby (civil parish within Danby & Mulgrave), Commondale (civil parish within Danby & Mulgrave), Danby (civil parish within Danby & Mulgrave), Ellerby (civil parish within Danby & Mulgrave) and Glaisdale (civil parish within Danby & Mulgrave) — these are the Danby & Mulgrave pockets our drawings cover most. Heritage designations here include Sandsend and Sandsend. North Yorkshire Council weighs each proposal against the adopted North Yorkshire local plan and North Yorkshire Council's design guidance for householder work, where the 3,030 homes here are 49% pre-1900, 8% 1965-1972, 7% 1945-1954, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building, over Victorian and earlier houses (49% of 3,030 homes), late-1960s and early-1970s houses (8%) and early postwar houses (7%).

What actually constrains a project in Danby & Mulgrave

Danby & Mulgrave's designated heritage is specific, and it is the first thing we check against your address: Sandsend (conservation area designated in 1974) and Sandsend (conservation area designated in 1974). Inside those boundaries permitted development is curtailed and North Yorkshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Danby & Mulgrave takes in Barnby, Borrowby, Commondale, Danby, Ellerby and Glaisdale. No Article 4 direction is recorded for North Yorkshire Council, but Danby & Mulgrave's 2 conservation areas still limit permitted development on those streets.

On stock, Danby & Mulgrave is Victorian and earlier houses (49% of 3,030 homes), late-1960s and early-1970s houses (8%) and early postwar houses (7%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. North Yorkshire Council decided 2,086 householder applications in the latest published year and granted 94%, with 64% issued inside the eight-week target. Those are the numbers our drawings are prepared against.

The full build-period split for Danby & Mulgrave runs pre-1900 49% (1,480 homes), 1900-1918 1% (30 homes), 1919-1929 3% (100 homes), 1930-1939 5% (160 homes), 1945-1954 7% (210 homes), 1955-1964 5% (150 homes), 1965-1972 8% (230 homes), 1973-1982 4% (110 homes), 1983-1992 4% (110 homes), 1993-1999 3% (100 homes) and 2000-2008 3% (80 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

North Yorkshire Council also decides for Aiskew & Leeming, Amotherby & Ampleforth, Barlby & Riccall, Bedale, Boroughbridge & Claro, Brayton & Barlow, Cawood & Escrick and Cayton, so a decision in Danby & Mulgrave sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Danby & Mulgrave in numbers — housing stock and planning decisions

Published figures for Danby & Mulgrave and North Yorkshire Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureDanby & Mulgrave
Dwellings recorded3,030
Built pre-19001,480 (49%)
Built 1900-191830 (1%)
Built 1919-1929100 (3%)
Built 1930-1939160 (5%)
Built 1945-1954210 (7%)
Built 1955-1964150 (5%)
Built 1965-1972230 (8%)
Built 1973-1982110 (4%)
Built 1983-1992110 (4%)
Built 1993-1999100 (3%)
Built 2000-200880 (3%)
Built before 191950%
Built 1919–19399%
Built 1945–200833%
Conservation areas in Danby & Mulgrave2 (Sandsend, Sandsend)
Conservation areas district-wide248
Article 4 directions recorded0
Householder applications decided2,086
Householder applications granted94%
Decided within 8 weeks64%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are North Yorkshire Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

The three tests a Danby & Mulgrave two-storey extension has to pass

Adding at first floor changes the question the case officer asks. A single-storey extension is judged mostly on daylight and garden loss; a two-storey extension is judged on overlooking, bulk against the neighbouring roofline, and whether it reads as part of the house or bolted onto it. Danby & Mulgrave is largely Victorian and earlier houses (49% of 3,030 homes), late-1960s and early-1970s houses (8%) and early postwar houses (7%), and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building set what a matching roof actually means here.

The permitted-development route exists but is narrow: 3 metres of rear projection, a 7-metre stand-off from the rear boundary, eaves and ridge no higher than the original, and side-facing upper windows obscure-glazed and non-opening below 1.7 metres above floor level. Most two-storey schemes fail one of those, usually the 7-metre boundary rule on a shorter garden, and go in as a full application instead. We establish which route applies before designing, because it changes the drawing set.

Danby & Mulgrave contains Sandsend, Sandsend conservation areas (Sandsend designated 1974), so materials, fenestration and roof form are assessed against the appraisal. No Article 4 direction is recorded for North Yorkshire Council, but Danby & Mulgrave's 2 conservation areas still limit permitted development on those streets.

Isometric two storey extension drawing for a Danby & Mulgrave house

Does a two storey extension need planning permission in Danby & Mulgrave?

Some two-storey rear extensions are permitted development. You will need a full application to North Yorkshire Council if any of these apply:

  • The extension projects more than 3 metres beyond the original rear wall
  • Any part comes within 7 metres of the rear boundary
  • The eaves or ridge would sit higher than the existing house
  • The extension is to the side, or wraps around to the side at first floor
  • Upper-floor side windows are clear-glazed or open below 1.7 metres
  • The property is on designated land such as Sandsend and Sandsend, where two-storey rights are removed

Danby & Mulgrave two-storey extension approval rates — live council data

Below is North Yorkshire Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. North Yorkshire Council granted 94% of its householder applications in the year to 31 March 2026, and Sandsend shapes what is approved here. Two-storey schemes attract more neighbour comment than any other householder work, so the overlooking and daylight case has to be made on the drawings.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

94%householder applications approved in North Yorkshire
87%national average — North Yorkshire is 7 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What two-storey extensions get approved in Danby & Mulgrave

Across Sandsend, Sandsend and Barnby, the schemes that succeed set the first floor back from the ground floor, keep the ridge below the original, and treat the flank wall as blank or obscure-glazed. On victorian and earlier houses (49% of 3,030 homes), matching the eaves line matters more than matching the brick: an extension that carries the existing eaves through reads as original even in a different material.

The 3,030 homes here are 49% pre-1900, 8% 1965-1972, 7% 1945-1954, which is what sets the realistic roof and rear-projection options. We draw the 45-degree daylight test from the neighbour's nearest habitable window, show the window positions in section, and set out the steel and foundation implications early — a two-storey extension changes the load path, so the structural design and the planning design have to be developed together rather than in sequence.

Ground floor created by a two storey extension in Danby & Mulgrave

Two-storey extensions across Danby & Mulgrave

We draw two-storey extensions across Danby & Mulgrave. A few of the areas where they come up most often:

Sandsend

Two storey extension drawings for Sandsend — conservation area designated in 1974 — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Sandsend

Two storey extension drawings for Sandsend — conservation area designated in 1974 — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Barnby

Two storey extension drawings for Barnby — civil parish within Danby & Mulgrave — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Borrowby

Two storey extension drawings for Borrowby — civil parish within Danby & Mulgrave — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Commondale

Two storey extension drawings for Commondale — civil parish within Danby & Mulgrave — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Danby

Two storey extension drawings for Danby — civil parish within Danby & Mulgrave — dimensioned against the 3m and 7m limits and drawn to North Yorkshire Council's guidance.

Which two-storey extensions are permitted development in Danby & Mulgrave?

The first-floor limits are tighter than the ground-floor ones. This is how the common cases compare.

SchemePermitted development?Deciding limitWhat North Yorkshire Council checks
Two-storey rear, 3m projection, 7m+ to boundaryOften yes3m projection / 7m boundaryRoof match, side-window glazing
Two-storey rear, under 7m to boundaryNo — full applicationRear-boundary distanceOverlooking, daylight, garden loss
Two-storey side extensionNo — full applicationSide elevationGap to boundary, street rhythm
Two-storey wraparoundNo — full applicationCombined footprintBulk, massing, neighbour amenity
Any two-storey on designated landNo — full applicationDesignationCharacter and appearance

Limits from the GPDO 2015, Schedule 2, Part 1, Class A — two-storey rear extension conditions.

Four steps to an approved Danby & Mulgrave two-storey extension

A fixed process built around how North Yorkshire Council validates and decides two-storey applications.

  1. 1

    Free approval check

    Send us your Danby & Mulgrave postcode and garden depth. We measure the 7-metre boundary rule against your plot, confirm designation status, and score your odds against live North Yorkshire Council decisions.

  2. 2

    Measured survey

    We measure the original rear wall, eaves and ridge heights, garden depth and every neighbouring window that faces the site — the inputs the daylight and overlooking case is built from.

  3. 3

    Design, drawings & structure

    Chartered designers develop the two-storey addition to your brief with the roof and eaves resolved, and we coordinate the load path so the structural scheme and the planning scheme are the same building.

  4. 4

    Submission & follow-through

    We submit the application, manage validation and case-officer queries, and revise the drawings free until North Yorkshire Council issues its decision.

Frequently asked questions

Do I need planning permission for a two storey extension in Danby & Mulgrave?

Often, but not always. A two-storey rear extension can be permitted development if it projects no more than 3 metres, sits at least 7 metres from the rear boundary, does not exceed the existing eaves and ridge, and has obscure-glazed non-opening side windows below 1.7 metres. In Danby & Mulgrave, the 7-metre rule is what most commonly forces a full application to North Yorkshire Council.

What is the 7 metre rule for two storey extensions in Danby & Mulgrave?

No part of a permitted-development two-storey rear extension may come within 7 metres of the boundary opposite the rear wall of the house. It exists to protect the neighbour behind you from being overlooked at first floor. On shorter Danby & Mulgrave gardens this is decisive, and we measure it on survey before any design work rather than discovering it at validation. North Yorkshire Council is the decision-maker.

Can I build a two storey side extension in Danby & Mulgrave?

Not under permitted development — two-storey side extensions always need a full application to North Yorkshire Council. They are assessed on the gap to the boundary, whether the street's rhythm of spaces between houses survives, and whether the extension is subordinate to the original. Setting the first floor back from the front building line and down from the ridge is what usually makes the difference. This applies to your Danby & Mulgrave address specifically.

Will a two storey extension in Danby & Mulgrave be refused for overlooking?

Overlooking is the most common objection, and it is answerable on the drawings. We position habitable-room windows away from neighbouring gardens, obscure-glaze and fix shut anything on the flank below 1.7 metres, and show the sight lines in section. Where the geometry is tight, a rooflight or a high-level window gives the same daylight without the mutual overlooking that draws objections. This applies to your Danby & Mulgrave address specifically. North Yorkshire Council is the decision-maker.

Do I need a party wall agreement for a two storey extension in Danby & Mulgrave?

Almost certainly. Excavating within 3 metres of a neighbouring structure and building on or up to the boundary both trigger the Party Wall etc. Act 1996, and a two-storey extension usually does both. It is entirely separate from North Yorkshire Council's planning decision, so we flag the notice period early and detail the junction on the drawings. This applies to your Danby & Mulgrave address specifically.

Does a two storey extension need structural calculations in Danby & Mulgrave?

Yes. Adding a floor changes the load path from roof to foundation, so beams, padstones and foundation depths all need designing and calculating for building control. Planning and building regulations are separate consents, and the structural set is what building control assesses — we prepare both so the approved scheme is the buildable one. This applies to your Danby & Mulgrave address specifically. North Yorkshire Council is the decision-maker.

How much do two storey extension plans in Danby & Mulgrave cost?

We quote each Danby & Mulgrave two-storey extension individually, because plot depth, roof form and structural complexity vary house to house, and send a fixed, no-obligation quote within one working day. It covers the drawing pack with free revisions until North Yorkshire Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Two storey extension plans across North Yorkshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Danby & Mulgrave