Engineer's calculations for a Katesgrove project — steel beams sized, padstones and load paths worked out and a signed calculations package your builder and Reading Borough Council's building control can build from, delivered in days and revised free until it is approved.
Reading Borough Council granted 87% of the householder planning decisions it made in its latest published year — level with the 87% England-wide householder average. The HMO Article 4 direction means a change of use is normally refused where HMOs already exceed 25 per cent within 50 metres, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Katesgrove carries at least one Article 4 direction, and conservation areas including Kendrick, South Park and Downshire Square remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Katesgrove is determined against an 8-week statutory target.
Katesgrove Hill (steep Victorian terraces between Southampton Street and Elgar Road), Silver Street (dense red-brick terraces near the town-centre edge), Elgar Road (Victorian streets running down toward the Kennet), Kendrick (substantial Victorian villas in the Kendrick conservation area), South Park (terraces around the South Park conservation area) and Mount Pleasant (terraced streets on the higher ground south of the centre) — these are the Katesgrove pockets our drawings cover most. Heritage designations here include Kendrick, South Park and Downshire Square. Reading Borough Council weighs each proposal against the Reading Borough Local Plan (2019), where the loss of family terraces to further flat or HMO conversion is resisted across the ward. Many Katesgrove terraces are already split into flats and HMOs, which carry no householder permitted-development rights.. On roofs the borough is pitched and gabled roofs on the hillside terraces and valley roofs behind the larger Victorian houses, over Victorian red-brick terraces climbing Katesgrove Hill, converted flats and HMOs on the terraced streets and larger Victorian houses toward Kendrick and South Park.
The moment a wall comes out or a new floor goes in, something has to carry the load that wall or floor was holding — and building control will not accept "it looks strong enough". The engineer traces the load path: the weight of the roof, floors and walls above is gathered into a beam, the beam is sized in steel or timber to carry it within safe deflection, and that load is passed through padstones into the masonry and down to the ground. On Katesgrove's Victorian red-brick terraces climbing Katesgrove Hill, converted flats and HMOs on the terraced streets and larger Victorian houses toward Kendrick and South Park, the spans and loads differ house to house, so every calculation is specific to the property.
The deliverable is two things that work together: the calculations, which show the maths an approved inspector can check, and the structural drawings, which turn that maths into something a builder can order and fit — a beam schedule with sizes and lengths, bearing and padstone details, and connection notes. The HMO Article 4 direction means a change of use is normally refused where HMOs already exceed 25 per cent within 50 metres, and the calculations are drawn to sit alongside the architectural set rather than contradict it. Everything is signed by a chartered or incorporated engineer carrying professional indemnity insurance.
Older Katesgrove stock — the kind found across Kendrick, South Park and Downshire Square — often hides the real structural question: shallow Victorian foundations, timber that has been notched by past work, or a wall that turns out to be load-bearing when the drawings assumed otherwise. Katesgrove ward is one of the three areas — with Park and Redlands — covered by Reading's HMO Article 4 direction, so changing a house to a small HMO here needs a planning application rather than relying on permitted-development rights. A survey-based calculation catches this before the wall is opened, not after.
Building control needs an engineer's calculations whenever you change how the building carries load. On a typical Katesgrove project that means any of these:
We size the steel, work the padstones and bearings, trace the load to the foundations and issue a signed calculations package and a beam schedule for Reading Borough Council's building control — coordinated with your architectural drawings so the beam that is calculated is the beam that is drawn and the beam that is ordered.
Below is Reading Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Katesgrove approves most householder schemes, but as an Article 4 ward of tightly packed hillside terraces the balance between family houses and HMOs is what drives its harder decisions. Structural calculations sit behind building control rather than planning, but the same wave of loft, extension and knock-through work that drives these decisions is exactly what needs an engineer's package.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Building control approves structural work by checking the numbers, not by looking at the finished steel. Reading Borough Council's inspector, or an approved inspector acting for you, reads the calculations to confirm the beam is deep enough for its span, that deflection stays within limits so ceilings do not crack, that the bearing length and padstones spread the point load into masonry that can take it, and that the load has somewhere to go all the way to the ground. Across Katesgrove Hill, Silver Street and Elgar Road, the recurring issue is a beam sized off a rule of thumb that the actual span will not support.
The loss of family terraces to further flat or HMO conversion is resisted across the ward. We issue calculations detailed enough to be signed off without a query, coordinate them with the architect's drawings so nothing conflicts on site, and stay available to revise if the builder finds the Katesgrove property is not quite as the survey assumed — free, until the work is approved.
We calculate beams, openings and floors on the period and modern stock across the borough. A few of the Katesgrove neighbourhoods where structural packages come up most often:
Structural calculations for Katesgrove Hill's steep Victorian terraces between Southampton Street and Elgar Road — beams sized, load paths traced and signed for Reading Borough Council's building control.
Structural calculations for Silver Street's dense red-brick terraces near the town-centre edge — beams sized, load paths traced and signed for Reading Borough Council's building control.
Structural calculations for Elgar Road's Victorian streets running down toward the Kennet — beams sized, load paths traced and signed for Reading Borough Council's building control.
Structural calculations for Kendrick's substantial Victorian villas in the Kendrick conservation area — beams sized, load paths traced and signed for Reading Borough Council's building control.
Structural calculations for South Park's terraces around the South Park conservation area — beams sized, load paths traced and signed for Reading Borough Council's building control.
Structural calculations for Mount Pleasant's terraced streets on the higher ground south of the centre — beams sized, load paths traced and signed for Reading Borough Council's building control.
Different jobs load the building differently, so each needs its own calculation. This is what the common Katesgrove projects typically require.
| Project | Typical structure | What the calculation proves | Signed off by |
|---|---|---|---|
| Wall knock-through | Steel beam on padstones | Span, deflection and bearing | Building control |
| Loft conversion | New floor beams and ridge/purlin steels | Floor loading and roof support | Building control |
| Rear or side extension | Opening beam plus extension roof and floor | Combined loads and foundations | Building control |
| Basement or underpinning | Retaining and foundation design | Ground and adjacent-building loads | Building control & party wall |
On older Katesgrove stock around Kendrick and South Park, shallow foundations and altered structure often mean the calculation drives the design rather than following it.
A fixed process built around building control rather than planning — most calculation packages are ready within five days of the architectural drawings.
Send us your Katesgrove postcode and the architect's drawings or a sketch. We confirm what structure the project needs, flag any load-bearing wall or foundation question, and tell you exactly what the calculation package will cover.
Where the loads are not obvious — an unknown wall, an old alteration, a deep span — we survey the property so the beam is sized on what is really there, not an assumption.
A chartered or incorporated engineer sizes the steel, works the padstones and load path, and issues the signed calculations and a beam schedule coordinated with your Katesgrove architectural set.
We submit the calculations to Reading Borough Council's building control or your approved inspector, answer queries, and revise free if the build uncovers something the survey could not see.
Whenever you change how the building carries weight — removing or opening a load-bearing wall, converting a loft, building an extension, or inserting a beam or column. Reading Borough Council's building control needs an engineer's calculation to approve any of these before the steel goes in. A Katesgrove project that only redecorates or moves a non-structural partition does not, but almost anything that opens the structure does.
No — they are a separate, later step. Planning permission decides whether Reading Borough Council will allow the change; structural calculations prove the change is safe to build and are submitted to building control, not to the planners. Many Katesgrove projects that need no planning permission at all — an internal knock-through, a permitted-development loft — still need a full engineer's calculation before work can lawfully start.
A chartered or incorporated structural engineer, carrying professional indemnity insurance, who takes responsibility for the numbers. Reading Borough Council's building control, or an approved inspector acting on your behalf, then checks and signs them off. Your builder cannot self-certify a steel beam, and an unsigned calculation will not be accepted — the engineer's signature and insurance are what make the package one building control will approve. This applies to your Katesgrove address specifically.
Yes — a beam over a removed wall is the most common calculation we do. We work out the load the wall was carrying, size a steel or timber beam to span the opening within safe deflection, and detail the padstones that spread its weight into the masonry each side. The result is a beam schedule your Katesgrove builder can order and Reading Borough Council's inspector can approve, with the load traced all the way to the foundations.
Sometimes. Where the loads are clear from the drawings we can calculate directly, but Katesgrove's older stock often hides surprises — a wall that turns out to be load-bearing, notched or altered joists, or shallow foundations near Kendrick and South Park. In those cases a short structural survey means the beam is sized on what is really there, which avoids a redesign once the builder opens the wall. Reading Borough Council is the decision-maker.
We price each Katesgrove package on the number of beams and the complexity — a single knock-through is straightforward, a whole-house loft-and-extension scheme has several elements — and send a fixed, no-obligation quote within one working day. It covers the calculations, the beam schedule and free revisions until Reading Borough Council's building control approves. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.