MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Structural drawings and calculations in Fareham — a steel beam schedule and load-path detail signed by an engineer
Fareham · Structural Engineer's Drawings & Calculations

Structural drawings and calculations in Fareham

Engineer's calculations for a Fareham project — steel beams sized, padstones and load paths worked out and a signed calculations package your builder and Fareham Borough Council's building control can build from, delivered in days and revised free until it is approved.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

What the data says about planning in Fareham

Fareham Borough Council granted 99% of the householder planning decisions it made in its latest published year — 12 points above the 87% England-wide householder average. Fareham contains Cams Hall, Catisfield, Fareham High Street conservation areas (Cams Hall designated 1982), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Fareham Borough Council needs a full application. Fareham carries at least one Article 4 direction, and conservation areas including Cams Hall, Catisfield and Fareham High Street remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Fareham is determined against an 8-week statutory target.

Cams Hall (conservation area designated in 1982), Catisfield (conservation area designated in 1994), Fareham High Street (conservation area designated in 1969), Hook (conservation area designated in 1974), Osborn Road (conservation area designated in 1979), Sarisbury Green (conservation area designated in 1994), Swanwick Shore (conservation area designated in 1994), Titchfield (conservation area designated in 1969), Fareham Town (ward of Fareham), Hook-with-Warsash (ward of Fareham), Sarisbury & Whiteley (ward of Fareham), Titchfield (ward of Fareham) and Wallington & Downend (ward of Fareham) — these are the Fareham pockets our drawings cover most. Heritage designations here include Cams Hall, Catisfield, Fareham High Street, Hook, Osborn Road, Sarisbury Green, Swanwick Shore and Titchfield. Fareham Borough Council weighs each proposal against the adopted Fareham local plan and Fareham Borough Council's design guidance for householder work, where the 15,840 homes here are 11% 1993-1999, 8% 1983-1992, 8% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 1990s building and trussed-rafter roofs typical of 1980s building, over 1990s estate houses (11% of 15,840 homes), 1980s estate houses (8%) and late-1960s and early-1970s houses (8%).

Designations, stock and decisions in Fareham

Heritage designation is the single biggest variable in Fareham, and it is address-specific: Cams Hall (conservation area designated in 1982), Catisfield (conservation area designated in 1994), Fareham High Street (conservation area designated in 1969), Hook (conservation area designated in 1974), Osborn Road (conservation area designated in 1979), Sarisbury Green (conservation area designated in 1994), Swanwick Shore (conservation area designated in 1994) and Titchfield (conservation area designated in 1969). Inside those boundaries permitted development is curtailed and Fareham Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Fareham takes in Fareham Town, Hook-with-Warsash, Sarisbury & Whiteley, Titchfield and Wallington & Downend. Fareham Borough Council has 19 recorded Article 4 directions — check the address before assuming PD applies in the district.

On stock, Fareham is 1990s estate houses (11% of 15,840 homes), 1980s estate houses (8%) and late-1960s and early-1970s houses (8%) — which is why trussed-rafter roofs typical of 1990s building and trussed-rafter roofs typical of 1980s building govern what a loft or rear projection can realistically be. Fareham Borough Council decided 394 householder applications in the latest published year and granted 99%, with 89% issued inside the eight-week target. We work from the council's own published record.

The full build-period split for Fareham runs pre-1900 3% (190 homes), 1900-1918 0% (30 homes), 1919-1929 0% (10 homes), 1930-1939 6% (350 homes), 1945-1954 3% (170 homes), 1955-1964 30% (1,850 homes), 1965-1972 33% (1,990 homes), 1973-1982 4% (260 homes), 1983-1992 5% (310 homes), 1993-1999 4% (220 homes) and 2000-2008 3% (170 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Fareham Borough Council also decides for Fareham Town, Hook-with-Warsash, Sarisbury & Whiteley, Titchfield and Wallington & Downend, so a decision in Fareham sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include 12-18 Thorney Close, Down End Farm, Hook and Hovercraft. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

The published numbers behind a Fareham application

Published figures for Fareham and Fareham Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureFareham
Dwellings recorded15,840
Built pre-1900190 (3%)
Built 1900-191830 (0%)
Built 1919-192910 (0%)
Built 1930-1939350 (6%)
Built 1945-1954170 (3%)
Built 1955-19641,850 (30%)
Built 1965-19721,990 (33%)
Built 1973-1982260 (4%)
Built 1983-1992310 (5%)
Built 1993-1999220 (4%)
Built 2000-2008170 (3%)
Built before 191912%
Built 1919–193911%
Built 1945–200867%
Conservation areas in Fareham8 (Cams Hall, Catisfield…)
Conservation areas district-wide13
Article 4 directions recorded19
Householder applications decided394
Householder applications granted99%
Decided within 8 weeks89%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Fareham Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What a structural package covers on a Fareham project

The moment a wall comes out or a new floor goes in, something has to carry the load that wall or floor was holding — and building control will not accept "it looks strong enough". The engineer traces the load path: the weight of the roof, floors and walls above is gathered into a beam, the beam is sized in steel or timber to carry it within safe deflection, and that load is passed through padstones into the masonry and down to the ground. On Fareham's 1990s estate houses (11% of 15,840 homes), 1980s estate houses (8%) and late-1960s and early-1970s houses (8%), the spans and loads differ house to house, so every calculation is specific to the property.

The deliverable is two things that work together: the calculations, which show the maths an approved inspector can check, and the structural drawings, which turn that maths into something a builder can order and fit — a beam schedule with sizes and lengths, bearing and padstone details, and connection notes. Fareham contains Cams Hall, Catisfield, Fareham High Street conservation areas (Cams Hall designated 1982), so materials, fenestration and roof form are assessed against the appraisal, and the calculations are drawn to sit alongside the architectural set rather than contradict it. Everything is signed by a chartered or incorporated engineer carrying professional indemnity insurance.

Older Fareham stock — the kind found across Cams Hall, Catisfield, Fareham High Street, Hook, Osborn Road, Sarisbury Green, Swanwick Shore and Titchfield — often hides the real structural question: shallow Victorian foundations, timber that has been notched by past work, or a wall that turns out to be load-bearing when the drawings assumed otherwise. Fareham Borough Council has 19 recorded Article 4 directions — check the address before assuming PD applies in the district. A survey-based calculation catches this before the wall is opened, not after.

Structural calculations package for a Fareham building project

When do I need structural calculations in Fareham?

Building control needs an engineer's calculations whenever you change how the building carries load. On a typical Fareham project that means any of these:

  • Removing or forming an opening in a load-bearing wall of a Fareham home — a knock-through, a wide opening or a chimney breast
  • Converting a loft on the borough's 1990s estate houses (11% of 15,840 homes), where the existing ceiling joists cannot carry a floor and new steels are needed
  • Any Fareham extension, where the new opening into the house and the extension's own roof and floor need beams
  • Inserting a steel beam, lintel or column, or replacing rotten or overloaded structure in an older Fareham property
  • Underpinning, a basement, or any change to a Fareham property's foundations
  • Where Fareham Borough Council's building control, your builder or a party wall surveyor specifically asks for a signed calculation

Fareham building activity — live from council data

Below is Fareham Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Fareham Borough Council granted 99% of 394 householder decisions in the year to 31 March 2026, 89% of them inside eight weeks. Structural calculations sit behind building control rather than planning, but the same wave of loft, extension and knock-through work that drives these decisions is exactly what needs an engineer's package.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

99%householder applications approved in Fareham
87%national average — Fareham is 12 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

How structural calculations get approved in Fareham

Building control approves structural work by checking the numbers, not by looking at the finished steel. Fareham Borough Council's inspector, or an approved inspector acting for you, reads the calculations to confirm the beam is deep enough for its span, that deflection stays within limits so ceilings do not crack, that the bearing length and padstones spread the point load into masonry that can take it, and that the load has somewhere to go all the way to the ground. Across Cams Hall, Catisfield and Fareham High Street, the recurring issue is a beam sized off a rule of thumb that the actual span will not support.

The 15,840 homes here are 11% 1993-1999, 8% 1983-1992, 8% 1965-1972, which is what sets the realistic roof and rear-projection options. We issue calculations detailed enough to be signed off without a query, coordinate them with the architect's drawings so nothing conflicts on site, and stay available to revise if the builder finds the Fareham property is not quite as the survey assumed — free, until the work is approved.

Beam schedule and load calculations for a Fareham project

Structural work across Fareham

We calculate beams, openings and floors on the period and modern stock across the borough. A few of the Fareham neighbourhoods where structural packages come up most often:

Cams Hall

Structural calculations for Cams Hall's conservation area designated in 1982 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

Catisfield

Structural calculations for Catisfield's conservation area designated in 1994 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

Fareham High Street

Structural calculations for Fareham High Street's conservation area designated in 1969 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

Hook

Structural calculations for Hook's conservation area designated in 1974 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

Osborn Road

Structural calculations for Osborn Road's conservation area designated in 1979 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

Sarisbury Green

Structural calculations for Sarisbury Green's conservation area designated in 1994 — beams sized, load paths traced and signed for Fareham Borough Council's building control.

What structure does each Fareham project need?

Different jobs load the building differently, so each needs its own calculation. This is what the common Fareham projects typically require.

ProjectTypical structureWhat the calculation provesSigned off by
Wall knock-throughSteel beam on padstonesSpan, deflection and bearingBuilding control
Loft conversionNew floor beams and ridge/purlin steelsFloor loading and roof supportBuilding control
Rear or side extensionOpening beam plus extension roof and floorCombined loads and foundationsBuilding control
Basement or underpinningRetaining and foundation designGround and adjacent-building loadsBuilding control & party wall

On older Fareham stock around Cams Hall and Catisfield, shallow foundations and altered structure often mean the calculation drives the design rather than following it.

Four steps to a signed Fareham structural package

A fixed process built around building control rather than planning — most calculation packages are ready within five days of the architectural drawings.

  1. 1

    Free feasibility check

    Send us your Fareham postcode and the architect's drawings or a sketch. We confirm what structure the project needs, flag any load-bearing wall or foundation question, and tell you exactly what the calculation package will cover.

  2. 2

    Structural survey

    Where the loads are not obvious — an unknown wall, an old alteration, a deep span — we survey the property so the beam is sized on what is really there, not an assumption.

  3. 3

    Calculations & structural drawings

    A chartered or incorporated engineer sizes the steel, works the padstones and load path, and issues the signed calculations and a beam schedule coordinated with your Fareham architectural set.

  4. 4

    Approval & site support

    We submit the calculations to Fareham Borough Council's building control or your approved inspector, answer queries, and revise free if the build uncovers something the survey could not see.

Frequently asked questions

When do I need structural calculations in Fareham?

Whenever you change how the building carries weight — removing or opening a load-bearing wall, converting a loft, building an extension, or inserting a beam or column. Fareham Borough Council's building control needs an engineer's calculation to approve any of these before the steel goes in. A Fareham project that only redecorates or moves a non-structural partition does not, but almost anything that opens the structure does.

Are structural calculations part of planning permission in Fareham?

No — they are a separate, later step. Planning permission decides whether Fareham Borough Council will allow the change; structural calculations prove the change is safe to build and are submitted to building control, not to the planners. Many Fareham projects that need no planning permission at all — an internal knock-through, a permitted-development loft — still need a full engineer's calculation before work can lawfully start.

Who signs the structural calculations for a Fareham project?

A chartered or incorporated structural engineer, carrying professional indemnity insurance, who takes responsibility for the numbers. Fareham Borough Council's building control, or an approved inspector acting on your behalf, then checks and signs them off. Your builder cannot self-certify a steel beam, and an unsigned calculation will not be accepted — the engineer's signature and insurance are what make the package one building control will approve.

Can you size the steel beam for a knock-through in Fareham?

Yes — a beam over a removed wall is the most common calculation we do. We work out the load the wall was carrying, size a steel or timber beam to span the opening within safe deflection, and detail the padstones that spread its weight into the masonry each side. The result is a beam schedule your Fareham builder can order and Fareham Borough Council's inspector can approve, with the load traced all the way to the foundations.

Do I need a structural survey before the calculations in Fareham?

Sometimes. Where the loads are clear from the drawings we can calculate directly, but Fareham's older stock often hides surprises — a wall that turns out to be load-bearing, notched or altered joists, or shallow foundations near Cams Hall and Catisfield. In those cases a short structural survey means the beam is sized on what is really there, which avoids a redesign once the builder opens the wall. Fareham Borough Council is the decision-maker.

How much do structural drawings and calculations in Fareham cost?

We price each Fareham package on the number of beams and the complexity — a single knock-through is straightforward, a whole-house loft-and-extension scheme has several elements — and send a fixed, no-obligation quote within one working day. It covers the calculations, the beam schedule and free revisions until Fareham Borough Council's building control approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Structural drawings & calculations across Fareham

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Fareham