MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Side return extension plans in Shirland — a glazed side-return infill opening up a period kitchen
Shirland · Side Return Extension Drawings & Planning

Side return extension plans in Shirland

Side-return infill drawings for Shirland terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to North East Derbyshire District Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Householder planning in Shirland — the record

North East Derbyshire District Council granted 93% of the householder planning decisions it made in its latest published year — 6 points above the 87% England-wide householder average. Shirland contains Amber Mill and Toad Hole, Hallfield Gate, Higham Old Village conservation areas (Amber Mill and Toad Hole designated 1990), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as Amber Mill and Toad Hole, Hallfield Gate and Higham Old Village those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Shirland is determined against an 8-week statutory target.

Amber Mill and Toad Hole (conservation area designated in 1990), Hallfield Gate (conservation area designated in 1990), Higham Old Village (conservation area designated in 1968), Shirland and Higham (civil parish within Shirland), Wessington (civil parish within Shirland) and Brackenfield (civil parish within Shirland) — these are the Shirland pockets our drawings cover most. Heritage designations here include Amber Mill and Toad Hole, Hallfield Gate and Higham Old Village. North East Derbyshire District Council weighs each proposal against North East Derbyshire District Council's development plan and the design policies it applies to householder applications, where the 2,940 homes here are 24% 1945-1954, 16% pre-1900, 7% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is simple gabled and hipped roofs typical of early postwar building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over early postwar houses (24% of 2,940 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (7%).

Shirland: the local constraints that decide your scheme

Before anything is drawn we check your address against the designations that apply in Shirland: Amber Mill and Toad Hole (conservation area designated in 1990), Hallfield Gate (conservation area designated in 1990) and Higham Old Village (conservation area designated in 1968). Inside those boundaries permitted development is curtailed and North East Derbyshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Shirland takes in Shirland and Higham, Wessington and Brackenfield. No Article 4 direction is recorded for North East Derbyshire District Council, but Shirland's 3 conservation areas still limit permitted development on those streets.

On stock, Shirland is early postwar houses (24% of 2,940 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (7%) — which is why simple gabled and hipped roofs typical of early postwar building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. North East Derbyshire District Council decided 304 householder applications in the latest published year and granted 93%, with 62% issued inside the eight-week target. That decision record, not a national figure, is what we design to.

The full build-period split for Shirland runs pre-1900 16% (460 homes), 1900-1918 2% (50 homes), 1919-1929 6% (170 homes), 1930-1939 5% (140 homes), 1945-1954 24% (710 homes), 1955-1964 6% (170 homes), 1965-1972 5% (160 homes), 1973-1982 7% (200 homes), 1983-1992 3% (80 homes), 1993-1999 4% (130 homes) and 2000-2008 2% (70 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

North East Derbyshire District Council also decides for Barlow & Holmesfield, Brampton & Walton, Clay Cross North, Coal Aston, Holmewood & Heath, Pilsley & Morton, Ridgeway & Marsh Lane and Sutton, so a decision in Shirland sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Shirland housing stock and council decisions, in figures

Published figures for Shirland and North East Derbyshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureShirland
Dwellings recorded2,940
Built pre-1900460 (16%)
Built 1900-191850 (2%)
Built 1919-1929170 (6%)
Built 1930-1939140 (5%)
Built 1945-1954710 (24%)
Built 1955-1964170 (6%)
Built 1965-1972160 (5%)
Built 1973-1982200 (7%)
Built 1983-199280 (3%)
Built 1993-1999130 (4%)
Built 2000-200870 (2%)
Built before 191917%
Built 1919–193911%
Built 1945–200852%
Conservation areas in Shirland3 (Amber Mill and Toad Hole, Hallfield Gate…)
Conservation areas district-wide33
Article 4 directions recorded0
Householder applications decided304
Householder applications granted93%
Decided within 8 weeks62%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are North East Derbyshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Side returns drawn for Shirland's period terraces

The side return is the classic terrace fix, and Shirland has the stock for it — the borough is built largely from early postwar houses (24% of 2,940 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (7%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. North East Derbyshire District Council judges the infill against North East Derbyshire District Council's development plan and the design policies it applies to householder applications, and because it runs along the party boundary, the neighbour relationship is read before the design.

That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Shirland contains Amber Mill and Toad Hole, Hallfield Gate, Higham Old Village conservation areas (Amber Mill and Toad Hole designated 1990), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.

Many of Shirland's terraces sit in conservation areas — Amber Mill and Toad Hole, Hallfield Gate and Higham Old Village among them — where a side extension is no longer permitted development. No Article 4 direction is recorded for North East Derbyshire District Council, but Shirland's 3 conservation areas still limit permitted development on those streets. We confirm the designation before a line is drawn.

Isometric side return extension drawing for a Shirland terrace

Does a side return extension need planning permission in Shirland?

Some single-storey side returns in Shirland are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to North East Derbyshire District Council if any of these apply:

  • The side extension is wider than half the width of the original house
  • It is more than one storey, or higher than 4 metres (or higher than the eaves along the side)
  • The property is on designated land — side extensions are not permitted development in conservation areas
  • You are combining the side return with a rear extension beyond 3 metres, which reads as a wraparound
  • Your terrace is in a conservation area such as Amber Mill and Toad Hole and Hallfield Gate, where side-extension rights are removed

Shirland side return approval rates — live from council data

Below is North East Derbyshire District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. North East Derbyshire District Council granted 93% of its householder applications in the year to 31 March 2026, and Amber Mill and Toad Hole shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

93%householder applications approved in North East Derbyshire
87%national average — North East Derbyshire is 6 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What side return extensions get approved in Shirland

Across Amber Mill and Toad Hole, Hallfield Gate and Higham Old Village, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's early postwar houses (24% of 2,940 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.

The 2,940 homes here are 24% 1945-1954, 16% pre-1900, 7% 1973-1982, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way North East Derbyshire District Council sees one coherent scheme rather than two overlapping ones.

Side return extension squaring off the ground floor of a Shirland terrace

Side return extensions across Shirland

We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Shirland side returns come up most often:

Amber Mill and Toad Hole

Side return extension drawings for Amber Mill and Toad Hole's conservation area designated in 1990 — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Hallfield Gate

Side return extension drawings for Hallfield Gate's conservation area designated in 1990 — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Higham Old Village

Side return extension drawings for Higham Old Village's conservation area designated in 1968 — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Shirland and Higham

Side return extension drawings for Shirland and Higham's civil parish within Shirland — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Wessington

Side return extension drawings for Wessington's civil parish within Shirland — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Brackenfield

Side return extension drawings for Brackenfield's civil parish within Shirland — width-checked, party-wall detailed and drawn to North East Derbyshire District Council's guidance.

Is your Shirland side return permitted development or a full application?

Whether a side return in Shirland needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.

Side return typePermitted development?What it gainsWhat North East Derbyshire District Council checks
Single-storey infill, within limitsOften yes, if under half the house widthFull-width kitchen-dinerWidth, 4m height, roof glazing
Single-storey, over half widthNo — full applicationWider room, more lightBoundary treatment, neighbour amenity
Two-storey side returnNo — full applicationRoom above as well as belowBulk, overlooking, terrace rhythm
Wraparound (side + rear)No — full applicationL-shaped open-plan ground floorCombined footprint, garden retained

In conservation areas such as Amber Mill and Toad Hole and Hallfield Gate, side extensions are not permitted development and always need a full application.

Four steps to an approved Shirland side return

A fixed process built around how North East Derbyshire District Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Shirland postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live North East Derbyshire District Council decisions.

  2. 2

    Measured survey

    We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.

  3. 3

    Side return design & drawings

    Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to North East Derbyshire District Council's extension guidance, with the boundary and party-wall junction detailed.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until North East Derbyshire District Council issues its decision.

Frequently asked questions

Does a side return extension need planning permission in Shirland?

Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Shirland you will need a full application to North East Derbyshire District Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Amber Mill and Toad Hole and Hallfield Gate, where those rights are removed.

What is a side return extension on a Shirland terrace?

It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Shirland's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. North East Derbyshire District Council is the decision-maker.

Do I need a party wall agreement for a side return in Shirland?

Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from North East Derbyshire District Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Shirland address specifically.

Can I combine a side return with a rear extension in Shirland?

Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to North East Derbyshire District Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Shirland address specifically.

How long does North East Derbyshire District Council take to decide a side return application?

A householder planning application in Shirland runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. North East Derbyshire District Council is the decision-maker.

How much do side return extension plans in Shirland cost?

We price each Shirland side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until North East Derbyshire District Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Side return extension plans across North East Derbyshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Shirland