Side-return infill drawings for Martock terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to Somerset Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
Somerset Council granted 94% of the householder planning decisions it made in its latest published year — 7 points above the 87% England-wide householder average. Martock contains Coat, East Stoke, Ilchester conservation areas (Coat designated 1978), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as Coat, East Stoke and Ilchester those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Martock is determined against an 8-week statutory target.
Coat (conservation area designated in 1978), East Stoke (conservation area designated in 1987), Ilchester (conservation area designated in 1976), Martock and Bower Hinton (conservation area designated in 1970), Tintinhull (conservation area designated in 1990), West Stoke (conservation area designated in 1987), Ilchester (civil parish within Martock), Long Load (civil parish within Martock), Stoke sub Hamdon (civil parish within Martock), Ash (civil parish within Martock) and Tintinhull (civil parish within Martock) — these are the Martock pockets our drawings cover most. Heritage designations here include Coat, East Stoke, Ilchester, Martock and Bower Hinton, Tintinhull and West Stoke. Somerset Council weighs each proposal against the adopted Somerset local plan and Somerset Council's design guidance for householder work, where the 4,720 homes here are 20% pre-1900, 11% 1965-1972, 11% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building, over Victorian and earlier houses (20% of 4,720 homes), late-1960s and early-1970s houses (11%) and 1970s and early-1980s houses (11%).
Before anything is drawn we check your address against the designations that apply in Martock: Coat (conservation area designated in 1978), East Stoke (conservation area designated in 1987), Ilchester (conservation area designated in 1976), Martock and Bower Hinton (conservation area designated in 1970), Tintinhull (conservation area designated in 1990) and West Stoke (conservation area designated in 1987). Inside those boundaries permitted development is curtailed and Somerset Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Martock takes in Ilchester, Long Load, Stoke sub Hamdon, Ash and Tintinhull. No Article 4 direction is recorded for Somerset Council, but Martock's 6 conservation areas still limit permitted development on those streets.
On stock, Martock is Victorian and earlier houses (20% of 4,720 homes), late-1960s and early-1970s houses (11%) and 1970s and early-1980s houses (11%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. Somerset Council decided 1,422 householder applications in the latest published year and granted 94%, with 74% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Martock runs pre-1900 20% (930 homes), 1900-1918 2% (100 homes), 1919-1929 1% (50 homes), 1930-1939 6% (260 homes), 1945-1954 5% (240 homes), 1955-1964 7% (330 homes), 1965-1972 11% (540 homes), 1973-1982 11% (530 homes), 1983-1992 8% (370 homes), 1993-1999 9% (410 homes) and 2000-2008 10% (470 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Somerset Council also decides for Blackdown & Neroche, Blackmoor Vale, Brent, Bridgwater South, Bridgwater West, Brympton, Burnham on Sea North and Cannington, so a decision in Martock sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Martock and Somerset Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Martock |
|---|---|
| Dwellings recorded | 4,720 |
| Built pre-1900 | 930 (20%) |
| Built 1900-1918 | 100 (2%) |
| Built 1919-1929 | 50 (1%) |
| Built 1930-1939 | 260 (6%) |
| Built 1945-1954 | 240 (5%) |
| Built 1955-1964 | 330 (7%) |
| Built 1965-1972 | 540 (11%) |
| Built 1973-1982 | 530 (11%) |
| Built 1983-1992 | 370 (8%) |
| Built 1993-1999 | 410 (9%) |
| Built 2000-2008 | 470 (10%) |
| Built before 1919 | 22% |
| Built 1919–1939 | 7% |
| Built 1945–2008 | 61% |
| Conservation areas in Martock | 6 (Coat, East Stoke…) |
| Conservation areas district-wide | 178 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 1,422 |
| Householder applications granted | 94% |
| Decided within 8 weeks | 74% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Somerset Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The side return is the classic terrace fix, and Martock has the stock for it — the borough is built largely from Victorian and earlier houses (20% of 4,720 homes), late-1960s and early-1970s houses (11%) and 1970s and early-1980s houses (11%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. Somerset Council judges the infill against the adopted Somerset local plan and Somerset Council's design guidance for householder work, and because it runs along the party boundary, the neighbour relationship is read before the design.
That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Martock contains Coat, East Stoke, Ilchester conservation areas (Coat designated 1978), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.
Many of Martock's terraces sit in conservation areas — Coat, East Stoke, Ilchester, Martock and Bower Hinton, Tintinhull and West Stoke among them — where a side extension is no longer permitted development. No Article 4 direction is recorded for Somerset Council, but Martock's 6 conservation areas still limit permitted development on those streets. We confirm the designation before a line is drawn.
Some single-storey side returns in Martock are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to Somerset Council if any of these apply:
We draw the infill wall on the boundary, the glazed roof below the neighbour's windows and the party-wall junction on the page — the details Somerset Council's officers and your neighbour both check — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Somerset Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Somerset Council granted 94% of its householder applications in the year to 31 March 2026, and Coat shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Coat, East Stoke and Ilchester, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's victorian and earlier houses (20% of 4,720 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.
The 4,720 homes here are 20% pre-1900, 11% 1965-1972, 11% 1973-1982, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way Somerset Council sees one coherent scheme rather than two overlapping ones.
We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Martock side returns come up most often:
Side return extension drawings for Coat's conservation area designated in 1978 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Side return extension drawings for East Stoke's conservation area designated in 1987 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Side return extension drawings for Ilchester's conservation area designated in 1976 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Side return extension drawings for Martock and Bower Hinton's conservation area designated in 1970 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Side return extension drawings for Tintinhull's conservation area designated in 1990 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Side return extension drawings for West Stoke's conservation area designated in 1987 — width-checked, party-wall detailed and drawn to Somerset Council's guidance.
Whether a side return in Martock needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.
| Side return type | Permitted development? | What it gains | What Somerset Council checks |
|---|---|---|---|
| Single-storey infill, within limits | Often yes, if under half the house width | Full-width kitchen-diner | Width, 4m height, roof glazing |
| Single-storey, over half width | No — full application | Wider room, more light | Boundary treatment, neighbour amenity |
| Two-storey side return | No — full application | Room above as well as below | Bulk, overlooking, terrace rhythm |
| Wraparound (side + rear) | No — full application | L-shaped open-plan ground floor | Combined footprint, garden retained |
In conservation areas such as Coat and East Stoke, side extensions are not permitted development and always need a full application.
A fixed process built around how Somerset Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.
Send us your Martock postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live Somerset Council decisions.
We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.
Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to Somerset Council's extension guidance, with the boundary and party-wall junction detailed.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Somerset Council issues its decision.
Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Martock you will need a full application to Somerset Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Coat and East Stoke, where those rights are removed.
It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Martock's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. Somerset Council is the decision-maker.
Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from Somerset Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Martock address specifically.
Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to Somerset Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Martock address specifically.
A householder planning application in Martock runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. Somerset Council is the decision-maker.
We price each Martock side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Somerset Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.