MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Side return extension plans in Edwinstowe & Clipstone — a glazed side-return infill opening up a period kitchen
Edwinstowe & Clipstone · Side Return Extension Drawings & Planning

Side return extension plans in Edwinstowe & Clipstone

Side-return infill drawings for Edwinstowe & Clipstone terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to Newark and Sherwood District Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Householder planning in Edwinstowe & Clipstone — the record

Newark and Sherwood District Council granted 96% of the householder planning decisions it made in its latest published year — 9 points above the 87% England-wide householder average. Edwinstowe & Clipstone contains the Edwinstowe conservation area (Edwinstowe designated 1970), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.

The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as Edwinstowe those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Edwinstowe & Clipstone is determined against an 8-week statutory target.

Edwinstowe (conservation area designated in 1970), Edwinstowe (civil parish within Edwinstowe & Clipstone), Clipstone (civil parish within Edwinstowe & Clipstone) and Kings Clipstone (civil parish within Edwinstowe & Clipstone) — these are the Edwinstowe & Clipstone pockets our drawings cover most. Heritage designations here include Edwinstowe. Newark and Sherwood District Council weighs each proposal against the adopted Newark and Sherwood local plan and Newark and Sherwood District Council's design guidance for householder work, where the 5,490 homes here are 22% 1919-1929, 13% 2000-2008, 9% 1945-1954, which is what sets the realistic roof and rear-projection options. On roofs the borough is hipped tiled roofs typical of early interwar building and trussed-rafter roofs typical of 2000s building, over early interwar houses (22% of 5,490 homes), 2000s houses and apartments (13%) and early postwar houses (9%).

Edwinstowe & Clipstone: the local constraints that decide your scheme

Before anything is drawn we check your address against the designations that apply in Edwinstowe & Clipstone: Edwinstowe (conservation area designated in 1970). Inside those boundaries permitted development is curtailed and Newark and Sherwood District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Edwinstowe & Clipstone takes in Edwinstowe, Clipstone and Kings Clipstone. No Article 4 direction is recorded for Newark and Sherwood District Council, but Edwinstowe & Clipstone's 1 conservation area still limit permitted development on those streets.

On stock, Edwinstowe & Clipstone is early interwar houses (22% of 5,490 homes), 2000s houses and apartments (13%) and early postwar houses (9%) — which is why hipped tiled roofs typical of early interwar building and trussed-rafter roofs typical of 2000s building govern what a loft or rear projection can realistically be. Newark and Sherwood District Council decided 341 householder applications in the latest published year and granted 96%, with 50% issued inside the eight-week target. That decision record, not a national figure, is what we design to.

The full build-period split for Edwinstowe & Clipstone runs pre-1900 3% (140 homes), 1900-1918 1% (40 homes), 1919-1929 22% (1,190 homes), 1930-1939 2% (90 homes), 1945-1954 9% (510 homes), 1955-1964 8% (460 homes), 1965-1972 9% (480 homes), 1973-1982 4% (240 homes), 1983-1992 3% (150 homes), 1993-1999 2% (130 homes) and 2000-2008 13% (730 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Newark and Sherwood District Council also decides for Balderton South, Bilsthorpe, Boughton, Collingham, Lowdham, Ollerton, Southwell and Sutton-on-Trent, so a decision in Edwinstowe & Clipstone sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Edwinstowe & Clipstone housing stock and council decisions, in figures

Published figures for Edwinstowe & Clipstone and Newark and Sherwood District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureEdwinstowe & Clipstone
Dwellings recorded5,490
Built pre-1900140 (3%)
Built 1900-191840 (1%)
Built 1919-19291,190 (22%)
Built 1930-193990 (2%)
Built 1945-1954510 (9%)
Built 1955-1964460 (8%)
Built 1965-1972480 (9%)
Built 1973-1982240 (4%)
Built 1983-1992150 (3%)
Built 1993-1999130 (2%)
Built 2000-2008730 (13%)
Built before 19193%
Built 1919–193923%
Built 1945–200849%
Conservation areas in Edwinstowe & Clipstone1 (Edwinstowe)
Conservation areas district-wide47
Article 4 directions recorded0
Householder applications decided341
Householder applications granted96%
Decided within 8 weeks50%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Newark and Sherwood District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Side returns drawn for Edwinstowe & Clipstone's period terraces

The side return is the classic terrace fix, and Edwinstowe & Clipstone has the stock for it — the borough is built largely from early interwar houses (22% of 5,490 homes), 2000s houses and apartments (13%) and early postwar houses (9%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. Newark and Sherwood District Council judges the infill against the adopted Newark and Sherwood local plan and Newark and Sherwood District Council's design guidance for householder work, and because it runs along the party boundary, the neighbour relationship is read before the design.

That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Edwinstowe & Clipstone contains the Edwinstowe conservation area (Edwinstowe designated 1970), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.

Many of Edwinstowe & Clipstone's terraces sit in conservation areas — Edwinstowe among them — where a side extension is no longer permitted development. No Article 4 direction is recorded for Newark and Sherwood District Council, but Edwinstowe & Clipstone's 1 conservation area still limit permitted development on those streets. We confirm the designation before a line is drawn.

Isometric side return extension drawing for a Edwinstowe & Clipstone terrace

Does a side return extension need planning permission in Edwinstowe & Clipstone?

Some single-storey side returns in Edwinstowe & Clipstone are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to Newark and Sherwood District Council if any of these apply:

  • The side extension is wider than half the width of the original house
  • It is more than one storey, or higher than 4 metres (or higher than the eaves along the side)
  • The property is on designated land — side extensions are not permitted development in conservation areas
  • You are combining the side return with a rear extension beyond 3 metres, which reads as a wraparound
  • Your terrace is in a conservation area such as Edwinstowe, where side-extension rights are removed

Edwinstowe & Clipstone side return approval rates — live from council data

Below is Newark and Sherwood District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Newark and Sherwood District Council granted 96% of its householder applications in the year to 31 March 2026, and Edwinstowe shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

96%householder applications approved in Newark and Sherwood
87%national average — Newark and Sherwood is 9 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What side return extensions get approved in Edwinstowe & Clipstone

Across Edwinstowe, Edwinstowe and Clipstone, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's early interwar houses (22% of 5,490 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.

The 5,490 homes here are 22% 1919-1929, 13% 2000-2008, 9% 1945-1954, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way Newark and Sherwood District Council sees one coherent scheme rather than two overlapping ones.

Side return extension squaring off the ground floor of a Edwinstowe & Clipstone terrace

Side return extensions across Edwinstowe & Clipstone

We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Edwinstowe & Clipstone side returns come up most often:

Edwinstowe

Side return extension drawings for Edwinstowe's conservation area designated in 1970 — width-checked, party-wall detailed and drawn to Newark and Sherwood District Council's guidance.

Edwinstowe

Side return extension drawings for Edwinstowe's civil parish within Edwinstowe & Clipstone — width-checked, party-wall detailed and drawn to Newark and Sherwood District Council's guidance.

Clipstone

Side return extension drawings for Clipstone's civil parish within Edwinstowe & Clipstone — width-checked, party-wall detailed and drawn to Newark and Sherwood District Council's guidance.

Kings Clipstone

Side return extension drawings for Kings Clipstone's civil parish within Edwinstowe & Clipstone — width-checked, party-wall detailed and drawn to Newark and Sherwood District Council's guidance.

Is your Edwinstowe & Clipstone side return permitted development or a full application?

Whether a side return in Edwinstowe & Clipstone needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.

Side return typePermitted development?What it gainsWhat Newark and Sherwood District Council checks
Single-storey infill, within limitsOften yes, if under half the house widthFull-width kitchen-dinerWidth, 4m height, roof glazing
Single-storey, over half widthNo — full applicationWider room, more lightBoundary treatment, neighbour amenity
Two-storey side returnNo — full applicationRoom above as well as belowBulk, overlooking, terrace rhythm
Wraparound (side + rear)No — full applicationL-shaped open-plan ground floorCombined footprint, garden retained

In conservation areas such as Edwinstowe, side extensions are not permitted development and always need a full application.

Four steps to an approved Edwinstowe & Clipstone side return

A fixed process built around how Newark and Sherwood District Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Edwinstowe & Clipstone postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live Newark and Sherwood District Council decisions.

  2. 2

    Measured survey

    We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.

  3. 3

    Side return design & drawings

    Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to Newark and Sherwood District Council's extension guidance, with the boundary and party-wall junction detailed.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Newark and Sherwood District Council issues its decision.

Frequently asked questions

Does a side return extension need planning permission in Edwinstowe & Clipstone?

Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Edwinstowe & Clipstone you will need a full application to Newark and Sherwood District Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Edwinstowe, where those rights are removed.

What is a side return extension on a Edwinstowe & Clipstone terrace?

It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Edwinstowe & Clipstone's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. Newark and Sherwood District Council is the decision-maker.

Do I need a party wall agreement for a side return in Edwinstowe & Clipstone?

Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from Newark and Sherwood District Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Edwinstowe & Clipstone address specifically.

Can I combine a side return with a rear extension in Edwinstowe & Clipstone?

Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to Newark and Sherwood District Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Edwinstowe & Clipstone address specifically.

How long does Newark and Sherwood District Council take to decide a side return application?

A householder planning application in Edwinstowe & Clipstone runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. Newark and Sherwood District Council is the decision-maker.

How much do side return extension plans in Edwinstowe & Clipstone cost?

We price each Edwinstowe & Clipstone side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Newark and Sherwood District Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Side return extension plans across Newark and Sherwood

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Edwinstowe & Clipstone