Side-return infill drawings for Bramshott & Liphook terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to East Hampshire District Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
East Hampshire District Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Bramshott & Liphook contains Liphook, River Wey conservation areas (Liphook designated 1977), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Bramshott & Liphook carries at least one Article 4 direction, and conservation areas including Liphook and River Wey remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Bramshott & Liphook is determined against an 8-week statutory target.
Liphook (conservation area designated in 1977), River Wey (conservation area designated in 1981) and Bramshott and Liphook (civil parish within Bramshott & Liphook) — these are the Bramshott & Liphook pockets our drawings cover most. Heritage designations here include Liphook and River Wey. East Hampshire District Council weighs each proposal against East Hampshire District Council's development plan and the design policies it applies to householder applications, where the 4,480 homes here are 15% 1973-1982, 10% 1955-1964, 9% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow trussed roofs typical of 1970s building and shallow gabled roofs typical of that period's building, over 1970s and early-1980s houses (15% of 4,480 homes), late-1950s and early-1960s houses (10%) and late-1960s and early-1970s houses (9%).
Before anything is drawn we check your address against the designations that apply in Bramshott & Liphook: Liphook (conservation area designated in 1977) and River Wey (conservation area designated in 1981). Inside those boundaries permitted development is curtailed and East Hampshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Bramshott & Liphook takes in Bramshott and Liphook. East Hampshire District Council has 50 recorded Article 4 directions — check the address before assuming PD applies in Bramshott & Liphook.
On stock, Bramshott & Liphook is 1970s and early-1980s houses (15% of 4,480 homes), late-1950s and early-1960s houses (10%) and late-1960s and early-1970s houses (9%) — which is why shallow trussed roofs typical of 1970s building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. East Hampshire District Council decided 327 householder applications in the latest published year and granted 91%, with 24% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Bramshott & Liphook runs pre-1900 8% (340 homes), 1900-1918 5% (240 homes), 1919-1929 4% (200 homes), 1930-1939 3% (140 homes), 1945-1954 5% (240 homes), 1955-1964 10% (440 homes), 1965-1972 9% (410 homes), 1973-1982 15% (660 homes), 1983-1992 8% (340 homes), 1993-1999 5% (220 homes) and 2000-2008 8% (370 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
East Hampshire District Council also decides for Alton Holybourne, Alton Whitedown, Bentworth & Froyle, Buriton & East Meon, Four Marks & Medstead, Headley, Horndean Catherington and Liss, so a decision in Bramshott & Liphook sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
The Article 4 directions recorded for this council include Ajax House/Plowden House, Liphook, Bedford Road, Petersfield, Bellhanger Enterprises, Bentworth and Bentley Business Park, Bentley. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.
Published figures for Bramshott & Liphook and East Hampshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Bramshott & Liphook |
|---|---|
| Dwellings recorded | 4,480 |
| Built pre-1900 | 340 (8%) |
| Built 1900-1918 | 240 (5%) |
| Built 1919-1929 | 200 (4%) |
| Built 1930-1939 | 140 (3%) |
| Built 1945-1954 | 240 (5%) |
| Built 1955-1964 | 440 (10%) |
| Built 1965-1972 | 410 (9%) |
| Built 1973-1982 | 660 (15%) |
| Built 1983-1992 | 340 (8%) |
| Built 1993-1999 | 220 (5%) |
| Built 2000-2008 | 370 (8%) |
| Built before 1919 | 13% |
| Built 1919–1939 | 8% |
| Built 1945–2008 | 60% |
| Conservation areas in Bramshott & Liphook | 2 (Liphook, River Wey) |
| Conservation areas district-wide | 50 |
| Article 4 directions recorded | 50 |
| Householder applications decided | 327 |
| Householder applications granted | 91% |
| Decided within 8 weeks | 24% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are East Hampshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The side return is the classic terrace fix, and Bramshott & Liphook has the stock for it — the borough is built largely from 1970s and early-1980s houses (15% of 4,480 homes), late-1950s and early-1960s houses (10%) and late-1960s and early-1970s houses (9%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. East Hampshire District Council judges the infill against East Hampshire District Council's development plan and the design policies it applies to householder applications, and because it runs along the party boundary, the neighbour relationship is read before the design.
That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Bramshott & Liphook contains Liphook, River Wey conservation areas (Liphook designated 1977), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.
Many of Bramshott & Liphook's terraces sit in conservation areas — Liphook and River Wey among them — where a side extension is no longer permitted development. East Hampshire District Council has 50 recorded Article 4 directions — check the address before assuming PD applies in Bramshott & Liphook. We confirm the designation before a line is drawn.
Some single-storey side returns in Bramshott & Liphook are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to East Hampshire District Council if any of these apply:
We draw the infill wall on the boundary, the glazed roof below the neighbour's windows and the party-wall junction on the page — the details East Hampshire District Council's officers and your neighbour both check — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is East Hampshire District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. East Hampshire District Council granted 91% of its householder applications in the year to 31 March 2026, and Liphook shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Liphook, River Wey and Bramshott and Liphook, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's 1970s and early-1980s houses (15% of 4,480 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.
The 4,480 homes here are 15% 1973-1982, 10% 1955-1964, 9% 1965-1972, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way East Hampshire District Council sees one coherent scheme rather than two overlapping ones.
We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Bramshott & Liphook side returns come up most often:
Side return extension drawings for Liphook's conservation area designated in 1977 — width-checked, party-wall detailed and drawn to East Hampshire District Council's guidance.
Side return extension drawings for River Wey's conservation area designated in 1981 — width-checked, party-wall detailed and drawn to East Hampshire District Council's guidance.
Side return extension drawings for Bramshott and Liphook's civil parish within Bramshott & Liphook — width-checked, party-wall detailed and drawn to East Hampshire District Council's guidance.
Whether a side return in Bramshott & Liphook needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.
| Side return type | Permitted development? | What it gains | What East Hampshire District Council checks |
|---|---|---|---|
| Single-storey infill, within limits | Often yes, if under half the house width | Full-width kitchen-diner | Width, 4m height, roof glazing |
| Single-storey, over half width | No — full application | Wider room, more light | Boundary treatment, neighbour amenity |
| Two-storey side return | No — full application | Room above as well as below | Bulk, overlooking, terrace rhythm |
| Wraparound (side + rear) | No — full application | L-shaped open-plan ground floor | Combined footprint, garden retained |
In conservation areas such as Liphook and River Wey, side extensions are not permitted development and always need a full application.
A fixed process built around how East Hampshire District Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.
Send us your Bramshott & Liphook postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live East Hampshire District Council decisions.
We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.
Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to East Hampshire District Council's extension guidance, with the boundary and party-wall junction detailed.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until East Hampshire District Council issues its decision.
Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Bramshott & Liphook you will need a full application to East Hampshire District Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Liphook and River Wey, where those rights are removed.
It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Bramshott & Liphook's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. East Hampshire District Council is the decision-maker.
Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from East Hampshire District Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Bramshott & Liphook address specifically.
Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to East Hampshire District Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Bramshott & Liphook address specifically.
A householder planning application in Bramshott & Liphook runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. East Hampshire District Council is the decision-maker.
We price each Bramshott & Liphook side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until East Hampshire District Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.