Side-return infill drawings for Beverley Rural terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to East Riding of Yorkshire Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
East Riding of Yorkshire Council granted 92% of the householder planning decisions it made in its latest published year — 5 points above the 87% England-wide householder average. Beverley Rural contains Beswick, Bishop Burton, Cherry Burton conservation areas (Beswick designated 2001), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Beverley Rural carries at least one Article 4 direction, and conservation areas including Beswick, Bishop Burton and Cherry Burton remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Beverley Rural is determined against an 8-week statutory target.
Beswick (conservation area designated in 2001), Bishop Burton (conservation area designated in 1974), Cherry Burton (conservation area designated in 2005), Etton (conservation area designated in 2007), Leven (conservation area designated in 2005), Lockington (conservation area designated in 1974), Lund (conservation area designated in 2001), Middleton on the Wolds (conservation area designated in 2011), North Newbald (conservation area designated in 1974), South Newbald (conservation area designated in 2008), Tickton (conservation area designated in 2009), Walkington (conservation area designated in 1974), Walkington (conservation area designated in 1974), Beswick (civil parish within Beverley Rural), Bishop Burton (civil parish within Beverley Rural), Cherry Burton (civil parish within Beverley Rural), Dalton Holme (civil parish within Beverley Rural), Etton (civil parish within Beverley Rural) and Leconfield (civil parish within Beverley Rural) — these are the Beverley Rural pockets our drawings cover most. Heritage designations here include Beswick, Bishop Burton, Cherry Burton, Etton, Leven, Lockington, Lund, Middleton on the Wolds, North Newbald, South Newbald, Tickton, Walkington and Walkington. East Riding of Yorkshire Council weighs each proposal against East Riding of Yorkshire Council's development plan and the design policies it applies to householder applications, where the 5,800 homes here are 17% 1965-1972, 16% pre-1900, 12% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over late-1960s and early-1970s houses (17% of 5,800 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (12%).
Before anything is drawn we check your address against the designations that apply in Beverley Rural: Beswick (conservation area designated in 2001), Bishop Burton (conservation area designated in 1974), Cherry Burton (conservation area designated in 2005), Etton (conservation area designated in 2007), Leven (conservation area designated in 2005), Lockington (conservation area designated in 1974), Lund (conservation area designated in 2001), Middleton on the Wolds (conservation area designated in 2011), North Newbald (conservation area designated in 1974), South Newbald (conservation area designated in 2008), Tickton (conservation area designated in 2009), Walkington (conservation area designated in 1974) and Walkington (conservation area designated in 1974). Inside those boundaries permitted development is curtailed and East Riding of Yorkshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Beverley Rural takes in Beswick, Bishop Burton, Cherry Burton, Dalton Holme, Etton and Leconfield. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Beverley Rural.
On stock, Beverley Rural is late-1960s and early-1970s houses (17% of 5,800 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (12%) — which is why shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. East Riding of Yorkshire Council decided 830 householder applications in the latest published year and granted 92%, with 95% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Beverley Rural runs pre-1900 16% (930 homes), 1900-1918 1% (60 homes), 1919-1929 1% (60 homes), 1930-1939 3% (190 homes), 1945-1954 5% (310 homes), 1955-1964 7% (410 homes), 1965-1972 17% (980 homes), 1973-1982 12% (720 homes), 1983-1992 11% (630 homes), 1993-1999 12% (680 homes) and 2000-2008 6% (340 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
East Riding of Yorkshire Council also decides for Bridlington North, Bridlington South, Dale, Driffield and Rural, East Wolds and Coastal, Goole South, Hessle and Howden, so a decision in Beverley Rural sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
The Article 4 directions recorded for this council include Alpine Villa (Beck Cottage), Atwick, Atwick Hall, Atwick, Clifton House, Atwick and Green View, Atwick. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.
Published figures for Beverley Rural and East Riding of Yorkshire Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Beverley Rural |
|---|---|
| Dwellings recorded | 5,800 |
| Built pre-1900 | 930 (16%) |
| Built 1900-1918 | 60 (1%) |
| Built 1919-1929 | 60 (1%) |
| Built 1930-1939 | 190 (3%) |
| Built 1945-1954 | 310 (5%) |
| Built 1955-1964 | 410 (7%) |
| Built 1965-1972 | 980 (17%) |
| Built 1973-1982 | 720 (12%) |
| Built 1983-1992 | 630 (11%) |
| Built 1993-1999 | 680 (12%) |
| Built 2000-2008 | 340 (6%) |
| Built before 1919 | 17% |
| Built 1919–1939 | 4% |
| Built 1945–2008 | 70% |
| Conservation areas in Beverley Rural | 13 (Beswick, Bishop Burton…) |
| Conservation areas district-wide | 126 |
| Article 4 directions recorded | 11 |
| Householder applications decided | 830 |
| Householder applications granted | 92% |
| Decided within 8 weeks | 95% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are East Riding of Yorkshire Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The side return is the classic terrace fix, and Beverley Rural has the stock for it — the borough is built largely from late-1960s and early-1970s houses (17% of 5,800 homes), Victorian and earlier houses (16%) and 1970s and early-1980s houses (12%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. East Riding of Yorkshire Council judges the infill against East Riding of Yorkshire Council's development plan and the design policies it applies to householder applications, and because it runs along the party boundary, the neighbour relationship is read before the design.
That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Beverley Rural contains Beswick, Bishop Burton, Cherry Burton conservation areas (Beswick designated 2001), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.
Many of Beverley Rural's terraces sit in conservation areas — Beswick, Bishop Burton, Cherry Burton, Etton, Leven, Lockington, Lund, Middleton on the Wolds, North Newbald, South Newbald, Tickton, Walkington and Walkington among them — where a side extension is no longer permitted development. East Riding of Yorkshire Council has 11 recorded Article 4 directions, removing permitted development for rear and side extensions — check the address before assuming PD applies in Beverley Rural. We confirm the designation before a line is drawn.
Some single-storey side returns in Beverley Rural are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to East Riding of Yorkshire Council if any of these apply:
We draw the infill wall on the boundary, the glazed roof below the neighbour's windows and the party-wall junction on the page — the details East Riding of Yorkshire Council's officers and your neighbour both check — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is East Riding of Yorkshire Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. East Riding of Yorkshire Council granted 92% of its householder applications in the year to 31 March 2026, and Beswick shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Beswick, Bishop Burton and Cherry Burton, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's late-1960s and early-1970s houses (17% of 5,800 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.
The 5,800 homes here are 17% 1965-1972, 16% pre-1900, 12% 1973-1982, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way East Riding of Yorkshire Council sees one coherent scheme rather than two overlapping ones.
We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Beverley Rural side returns come up most often:
Side return extension drawings for Beswick's conservation area designated in 2001 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Side return extension drawings for Bishop Burton's conservation area designated in 1974 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Side return extension drawings for Cherry Burton's conservation area designated in 2005 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Side return extension drawings for Etton's conservation area designated in 2007 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Side return extension drawings for Leven's conservation area designated in 2005 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Side return extension drawings for Lockington's conservation area designated in 1974 — width-checked, party-wall detailed and drawn to East Riding of Yorkshire Council's guidance.
Whether a side return in Beverley Rural needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.
| Side return type | Permitted development? | What it gains | What East Riding of Yorkshire Council checks |
|---|---|---|---|
| Single-storey infill, within limits | Often yes, if under half the house width | Full-width kitchen-diner | Width, 4m height, roof glazing |
| Single-storey, over half width | No — full application | Wider room, more light | Boundary treatment, neighbour amenity |
| Two-storey side return | No — full application | Room above as well as below | Bulk, overlooking, terrace rhythm |
| Wraparound (side + rear) | No — full application | L-shaped open-plan ground floor | Combined footprint, garden retained |
In conservation areas such as Beswick and Bishop Burton, side extensions are not permitted development and always need a full application.
A fixed process built around how East Riding of Yorkshire Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.
Send us your Beverley Rural postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live East Riding of Yorkshire Council decisions.
We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.
Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to East Riding of Yorkshire Council's extension guidance, with the boundary and party-wall junction detailed.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until East Riding of Yorkshire Council issues its decision.
Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Beverley Rural you will need a full application to East Riding of Yorkshire Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Beswick and Bishop Burton, where those rights are removed.
It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Beverley Rural's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. East Riding of Yorkshire Council is the decision-maker.
Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from East Riding of Yorkshire Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Beverley Rural address specifically.
Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to East Riding of Yorkshire Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Beverley Rural address specifically.
A householder planning application in Beverley Rural runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. East Riding of Yorkshire Council is the decision-maker.
We price each Beverley Rural side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until East Riding of Yorkshire Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.