Side-return infill drawings for Barming Heath & Teston terraces — the glazed extension that fills the redundant side alley and opens up the kitchen, drawn to Maidstone Borough Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
Maidstone Borough Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Barming Heath & Teston contains Teston, Teston Extension conservation areas (Teston designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Barming Heath & Teston carries at least one Article 4 direction, and conservation areas including Teston and Teston Extension remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Barming Heath & Teston is determined against an 8-week statutory target.
Teston (conservation area designated in 1974), Teston Extension (conservation area designated in 2000), Teston (civil parish within Barming Heath & Teston) and Barming (civil parish within Barming Heath & Teston) — these are the Barming Heath & Teston pockets our drawings cover most. Heritage designations here include Teston and Teston Extension. Maidstone Borough Council weighs each proposal against Maidstone Borough Council's adopted local plan and its householder design guidance, where the 3,400 homes here are 21% 2000-2008, 14% 1955-1964, 14% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 2000s building and shallow gabled roofs typical of that period's building, over 2000s houses and apartments (21% of 3,400 homes), late-1950s and early-1960s houses (14%) and late-1960s and early-1970s houses (14%).
Before anything is drawn we check your address against the designations that apply in Barming Heath & Teston: Teston (conservation area designated in 1974) and Teston Extension (conservation area designated in 2000). Inside those boundaries permitted development is curtailed and Maidstone Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Barming Heath & Teston takes in Teston and Barming. Maidstone Borough Council has 84 recorded Article 4 directions — check the address before assuming PD applies in Barming Heath & Teston.
On stock, Barming Heath & Teston is 2000s houses and apartments (21% of 3,400 homes), late-1950s and early-1960s houses (14%) and late-1960s and early-1970s houses (14%) — which is why trussed-rafter roofs typical of 2000s building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. Maidstone Borough Council decided 536 householder applications in the latest published year and granted 91%, with 81% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Barming Heath & Teston runs pre-1900 10% (340 homes), 1900-1918 3% (90 homes), 1919-1929 5% (160 homes), 1930-1939 5% (160 homes), 1945-1954 3% (110 homes), 1955-1964 14% (470 homes), 1965-1972 14% (460 homes), 1973-1982 2% (70 homes), 1983-1992 2% (70 homes), 1993-1999 5% (180 homes) and 2000-2008 21% (730 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Maidstone Borough Council also decides for Bearsted & Downswood, Boxley Downs, Coxheath & Farleigh, High Street, Leeds & Langley, Loose & Linton, Marden & Yalding and Staplehurst, so a decision in Barming Heath & Teston sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
The Article 4 directions recorded for this council include 29 Albion Place, 62 Earl Street, 66 Earl Street and 70-72 King Street,. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.
Published figures for Barming Heath & Teston and Maidstone Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Barming Heath & Teston |
|---|---|
| Dwellings recorded | 3,400 |
| Built pre-1900 | 340 (10%) |
| Built 1900-1918 | 90 (3%) |
| Built 1919-1929 | 160 (5%) |
| Built 1930-1939 | 160 (5%) |
| Built 1945-1954 | 110 (3%) |
| Built 1955-1964 | 470 (14%) |
| Built 1965-1972 | 460 (14%) |
| Built 1973-1982 | 70 (2%) |
| Built 1983-1992 | 70 (2%) |
| Built 1993-1999 | 180 (5%) |
| Built 2000-2008 | 730 (21%) |
| Built before 1919 | 13% |
| Built 1919–1939 | 9% |
| Built 1945–2008 | 61% |
| Conservation areas in Barming Heath & Teston | 2 (Teston, Teston Extension) |
| Conservation areas district-wide | 53 |
| Article 4 directions recorded | 84 |
| Householder applications decided | 536 |
| Householder applications granted | 91% |
| Decided within 8 weeks | 81% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Maidstone Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The side return is the classic terrace fix, and Barming Heath & Teston has the stock for it — the borough is built largely from 2000s houses and apartments (21% of 3,400 homes), late-1950s and early-1960s houses (14%) and late-1960s and early-1970s houses (14%), and the Victorian and Edwardian versions almost all have an L-shaped back addition with a wasted alley beside it. Fill that alley and the dark galley kitchen becomes a bright, square room the full width of the house. Maidstone Borough Council judges the infill against Maidstone Borough Council's adopted local plan and its householder design guidance, and because it runs along the party boundary, the neighbour relationship is read before the design.
That boundary is where the drawings earn their keep. We set the infill wall on or up to the line, keep the roof — usually a glazed lantern or a shallow pitch tying into the existing back-addition slope — below the neighbour's first-floor windows, and detail the rainwater and party-wall junction so the build is watertight and the Party Wall Act is satisfied. Barming Heath & Teston contains Teston, Teston Extension conservation areas (Teston designated 1974), so materials, fenestration and roof form are assessed against the appraisal, so we resolve it on the section rather than leave it to the case officer.
Many of Barming Heath & Teston's terraces sit in conservation areas — Teston and Teston Extension among them — where a side extension is no longer permitted development. Maidstone Borough Council has 84 recorded Article 4 directions — check the address before assuming PD applies in Barming Heath & Teston. We confirm the designation before a line is drawn.
Some single-storey side returns in Barming Heath & Teston are permitted development, but the width and boundary make an application more likely than for a straight rear extension. You will normally need to apply to Maidstone Borough Council if any of these apply:
We draw the infill wall on the boundary, the glazed roof below the neighbour's windows and the party-wall junction on the page — the details Maidstone Borough Council's officers and your neighbour both check — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Maidstone Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Maidstone Borough Council granted 91% of its householder applications in the year to 31 March 2026, and Teston shapes what is approved here. Side returns hinge on width, roof glazing and the party boundary, so a pack that resolves those details upfront is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Teston, Teston Extension and Teston, the approved side return is a single-storey infill roofed with a glazed lantern or roof light to pull daylight deep into the plan, its flank wall built on the boundary and finished to match the host brick. On the borough's 2000s houses and apartments (21% of 3,400 homes), this is frequently the single biggest gain in usable ground-floor space, and where it stays within the width and height limits it can proceed under permitted development or a lawful development certificate.
The 3,400 homes here are 21% 2000-2008, 14% 1955-1964, 14% 1965-1972, which is what sets the realistic roof and rear-projection options. We keep the glazed roof below the neighbour's cill line, set the gutter and the party-wall flashing so water and maintenance are designed in, and — where owners want the full open-plan room — pair the infill with a rear extension as a single wraparound application. That way Maidstone Borough Council sees one coherent scheme rather than two overlapping ones.
We draw side-return infills on every terraced street in the borough. A few of the neighbourhoods where Barming Heath & Teston side returns come up most often:
Side return extension drawings for Teston's conservation area designated in 1974 — width-checked, party-wall detailed and drawn to Maidstone Borough Council's guidance.
Side return extension drawings for Teston Extension's conservation area designated in 2000 — width-checked, party-wall detailed and drawn to Maidstone Borough Council's guidance.
Side return extension drawings for Teston's civil parish within Barming Heath & Teston — width-checked, party-wall detailed and drawn to Maidstone Borough Council's guidance.
Side return extension drawings for Barming's civil parish within Barming Heath & Teston — width-checked, party-wall detailed and drawn to Maidstone Borough Council's guidance.
Whether a side return in Barming Heath & Teston needs permission comes down to width, storeys and whether the street is designated. This is how the cases compare.
| Side return type | Permitted development? | What it gains | What Maidstone Borough Council checks |
|---|---|---|---|
| Single-storey infill, within limits | Often yes, if under half the house width | Full-width kitchen-diner | Width, 4m height, roof glazing |
| Single-storey, over half width | No — full application | Wider room, more light | Boundary treatment, neighbour amenity |
| Two-storey side return | No — full application | Room above as well as below | Bulk, overlooking, terrace rhythm |
| Wraparound (side + rear) | No — full application | L-shaped open-plan ground floor | Combined footprint, garden retained |
In conservation areas such as Teston and Teston Extension, side extensions are not permitted development and always need a full application.
A fixed process built around how Maidstone Borough Council validates and decides side-return applications — most drawings are submission-ready within seven days of survey.
Send us your Barming Heath & Teston postcode and terrace type. We confirm your conservation and Article 4 status, whether the infill stays within the side-extension width limit, and score your odds against live Maidstone Borough Council decisions.
We measure the side alley, the back-addition wall, floor and eaves levels and the neighbour's window heights — the numbers the width limit, roof pitch and party-wall detailing depend on.
Chartered designers develop the infill and its glazed roof to your brief, drawn inside the permitted-development limits or to Maidstone Borough Council's extension guidance, with the boundary and party-wall junction detailed.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Maidstone Borough Council issues its decision.
Sometimes not. A single-storey side-return infill can be permitted development if it is no wider than half the original house, no higher than 4 metres, and the property is not on designated land. In Barming Heath & Teston you will need a full application to Maidstone Borough Council for anything wider or taller, for a two-storey side return, and for any side extension in a conservation area such as Teston and Teston Extension, where those rights are removed.
It is an infill that fills the narrow open alley running alongside the rear back-addition of a Victorian or Edwardian terrace — the strip of ground that is usually too small to use. Building over it squares off the ground floor, so a cramped galley kitchen becomes a full-width room. Barming Heath & Teston's period terraces are ideally suited to it, which is why the side return is one of the borough's most common extensions. Maidstone Borough Council is the decision-maker.
Almost always. A side return is built on or up to the boundary with your neighbour, so the Party Wall etc. Act applies and you must serve notice before work starts — this is entirely separate from Maidstone Borough Council's planning decision. We detail the party-wall junction on the drawings and flag the notice early so a surveyor can be appointed without delaying the build. This applies to your Barming Heath & Teston address specifically.
Yes, and it is common — the combined L-shape is a wraparound extension. Once the side infill joins a rear projection beyond the permitted-development depth, the whole thing needs a full householder application to Maidstone Borough Council rather than qualifying as permitted development. We draw it as one coherent scheme so the council assesses a single footprint, which reads more clearly than two overlapping proposals. This applies to your Barming Heath & Teston address specifically.
A householder planning application in Barming Heath & Teston runs to a statutory eight-week target, and a lawful development certificate to eight weeks as well, though an incomplete pack can stall at validation. Because a side return involves the boundary and roof glazing, a complete, well-detailed submission matters — we prepare it validation-complete and manage officer queries to keep the decision on track. Maidstone Borough Council is the decision-maker.
We price each Barming Heath & Teston side return individually, because alley width and roof form vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Maidstone Borough Council approves, and we confirm at the outset whether your infill is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.