Back-of-house extension drawings for Repton homes — the glazed kitchen-diner across the rear, drawn to South Derbyshire District Council's depth and daylight limits, delivered in days and revised free until your decision, with a free approval-odds check first.
South Derbyshire District Council granted 97% of the householder planning decisions it made in its latest published year — 10 points above the 87% England-wide householder average. Repton contains Bretby, Milton, Newton Solney conservation areas (Bretby designated 1976), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which South Derbyshire District Council needs a full application. In conservation areas such as Bretby, Milton and Newton Solney those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Repton is determined against an 8-week statutory target.
Bretby (conservation area designated in 1976), Milton (conservation area designated in 1971), Newton Solney (conservation area designated in 1978), Repton (conservation area designated in 1969), Smisby (conservation area designated in 1978), Ticknall (conservation area designated in 1972), Bretby (civil parish within Repton), Calke (civil parish within Repton), Foremark (civil parish within Repton), Ingleby (civil parish within Repton), Newton Solney (civil parish within Repton) and Smisby (civil parish within Repton) — these are the Repton pockets our drawings cover most. Heritage designations here include Bretby, Milton, Newton Solney, Repton, Smisby and Ticknall. South Derbyshire District Council weighs each proposal against the adopted South Derbyshire local plan and South Derbyshire District Council's design guidance for householder work, where the 2,190 homes here are 22% pre-1900, 10% 1965-1972, 9% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building, over Victorian and earlier houses (22% of 2,190 homes), late-1960s and early-1970s houses (10%) and late-1950s and early-1960s houses (9%).
Heritage designation is the single biggest variable in Repton, and it is address-specific: Bretby (conservation area designated in 1976), Milton (conservation area designated in 1971), Newton Solney (conservation area designated in 1978), Repton (conservation area designated in 1969), Smisby (conservation area designated in 1978) and Ticknall (conservation area designated in 1972). Inside those boundaries permitted development is curtailed and South Derbyshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Repton takes in Bretby, Calke, Foremark, Ingleby, Newton Solney and Smisby. No Article 4 direction is recorded for South Derbyshire District Council, but Repton's 6 conservation areas still limit permitted development on those streets.
On stock, Repton is Victorian and earlier houses (22% of 2,190 homes), late-1960s and early-1970s houses (10%) and late-1950s and early-1960s houses (9%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. South Derbyshire District Council decided 273 householder applications in the latest published year and granted 97%, with 61% issued inside the eight-week target. We work from the council's own published record.
The full build-period split for Repton runs pre-1900 22% (480 homes), 1900-1918 2% (40 homes), 1919-1929 3% (60 homes), 1930-1939 6% (140 homes), 1945-1954 7% (150 homes), 1955-1964 9% (200 homes), 1965-1972 10% (220 homes), 1973-1982 9% (200 homes), 1983-1992 4% (90 homes), 1993-1999 3% (70 homes) and 2000-2008 6% (130 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
South Derbyshire District Council also decides for Aston, Etwall, Melbourne, Seales and Stenson, so a decision in Repton sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Repton and South Derbyshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Repton |
|---|---|
| Dwellings recorded | 2,190 |
| Built pre-1900 | 480 (22%) |
| Built 1900-1918 | 40 (2%) |
| Built 1919-1929 | 60 (3%) |
| Built 1930-1939 | 140 (6%) |
| Built 1945-1954 | 150 (7%) |
| Built 1955-1964 | 200 (9%) |
| Built 1965-1972 | 220 (10%) |
| Built 1973-1982 | 200 (9%) |
| Built 1983-1992 | 90 (4%) |
| Built 1993-1999 | 70 (3%) |
| Built 2000-2008 | 130 (6%) |
| Built before 1919 | 24% |
| Built 1919–1939 | 9% |
| Built 1945–2008 | 48% |
| Conservation areas in Repton | 6 (Bretby, Milton…) |
| Conservation areas district-wide | 22 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 273 |
| Householder applications granted | 97% |
| Decided within 8 weeks | 61% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are South Derbyshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The rear extension is the workhorse of Repton home improvement — it is how a dark back kitchen becomes an open family room facing the garden. Because the borough is built largely from Victorian and earlier houses (22% of 2,190 homes), late-1960s and early-1970s houses (10%) and late-1950s and early-1960s houses (9%), most back walls sit close to a neighbour on at least one side, and that proximity, not the design, is what South Derbyshire District Council scrutinises. The council reads the proposal against the adopted South Derbyshire local plan and South Derbyshire District Council's design guidance for householder work, and the first line an officer draws is the 45-degree splay from the neighbour's nearest window.
So the drawings live or die on geometry. We set the depth against the exact permitted-development figure, hold the eaves and the flat-roof or lantern build-up under the 4-metre height ceiling, and show the projection tested against both the 45-degree plan angle and the 25-degree section angle to the neighbouring windows. Repton contains Bretby, Milton, Newton Solney conservation areas (Bretby designated 1976), so materials, fenestration and roof form are assessed against the appraisal, so the rear elevation is composed around it rather than corrected after an objection.
Where the property sits in a conservation area — Bretby, Milton, Newton Solney, Repton, Smisby and Ticknall among Repton's — the larger-home extension route is switched off and even a modest rear addition needs consent. No Article 4 direction is recorded for South Derbyshire District Council, but Repton's 6 conservation areas still limit permitted development on those streets. We confirm the designation before the survey.
Many single-storey rear extensions in Repton are permitted development and need no application. You will normally need to apply to South Derbyshire District Council, or use the larger-home prior-approval route, if any of these apply:
We draw the depth, the roof build-up and the daylight splays to each neighbour on the page — the tests South Derbyshire District Council's officers apply first — and submit a validation-complete pack, whether that is a lawful development certificate, a larger-home prior-approval notice or a full householder application.
Below is South Derbyshire District Council's real householder decision record, taken from official planning statistics and refreshed as new data lands. South Derbyshire District Council granted 97% of its householder applications in the year to 31 March 2026, and Bretby shapes what is approved here. Rear extensions turn most often on neighbour daylight and depth, so a drawing pack that proves those tests upfront is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Bretby, Milton and Newton Solney, the approved rear extension is typically a single-storey glazed box within the depth limit, roofed either flat with a lantern or in a shallow mono-pitch, and finished in brick or render to match the host wall. On the borough's victorian and earlier houses (22% of 2,190 homes), keeping the projection to the permitted-development figure often avoids an application entirely; where owners want the full 6 metres, the larger-home route succeeds when the neighbour-consultation period passes without a sustained objection.
The 2,190 homes here are 22% pre-1900, 10% 1965-1972, 9% 1955-1964, which is what sets the realistic roof and rear-projection options. We keep the extension inside the daylight splays, set any glazed roof below the first-floor cill, and retain the garden depth South Derbyshire District Council expects — so the back elevation answers the amenity case before a neighbour can lodge one. Two-storey rear extensions we draw with the 7-metre boundary gap and privacy screening resolved on the plan.
We draw rear extensions on every street in the borough. A few of the neighbourhoods where Repton back-of-house projects come up most often:
Rear extension drawings for Bretby's conservation area designated in 1976 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
Rear extension drawings for Milton's conservation area designated in 1971 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
Rear extension drawings for Newton Solney's conservation area designated in 1978 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
Rear extension drawings for Repton's conservation area designated in 1969 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
Rear extension drawings for Smisby's conservation area designated in 1978 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
Rear extension drawings for Ticknall's conservation area designated in 1972 — depth-checked, daylight-tested and drawn to South Derbyshire District Council's guidance.
How far you can extend at the back in Repton depends on your house type and the route you take. This is how the options compare.
| Route | Depth allowed | Consent needed | What South Derbyshire District Council checks |
|---|---|---|---|
| Standard permitted development | 3m terrace/semi · 4m detached | Lawful development certificate (optional) | Depth, 4m height, materials |
| Larger-home prior approval | 6m terrace/semi · 8m detached | Prior-approval notice + neighbour consultation | Neighbour objections on amenity |
| Full householder application | Beyond the above, or two-storey | Full planning permission | Daylight (45°/25°), bulk, garden retained |
| Conservation area | Case by case | Full planning permission | Character, roof form, boundary treatment |
The larger-home route is switched off on designated land — conservation areas such as Bretby and Milton and Article 4 streets need a full application.
A fixed process built around how South Derbyshire District Council validates and decides rear-extension applications — most drawings are submission-ready within seven days of survey.
Send us your Repton postcode and house type. We confirm your conservation and Article 4 status, how much rear-extension depth you have under permitted development, and score your odds against live South Derbyshire District Council decisions.
We measure the original rear wall, floor and eaves levels, side and rear boundary distances and the neighbours' window positions — the numbers the depth limit and daylight splays depend on.
Chartered designers develop the single or two-storey rear extension to your brief, drawn inside the permitted-development limits or to South Derbyshire District Council's extension design guidance, with the daylight angles shown.
We submit the certificate, prior-approval notice or application, handle validation and case-officer queries, and revise the drawings free until South Derbyshire District Council issues its decision.
Often not. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development in Repton. You will need to involve South Derbyshire District Council for anything deeper via the larger-home route, for two-storey rear extensions, and for any rear extension in a conservation area such as Bretby and Milton, where those permitted-development rights fall away.
The larger-home extension scheme lets a single-storey rear extension reach 6 metres on a terrace or semi, or 8 metres on a detached house — double the standard allowance. It is not automatic: you submit a prior-approval notification to South Derbyshire District Council, neighbours are consulted, and if one objects on amenity grounds the council rules on it. It also does not apply on designated land such as Repton's conservation areas.
It is the daylight test South Derbyshire District Council applies to protect neighbours. Drawn on plan, a line at 45 degrees from the midpoint of the neighbour's nearest ground-floor window should not be crossed by your extension; a companion 25-degree line is checked in section. If the projection breaches it, the extension is likely to be shortened or refused, so we test and prove it on the drawings before submission. This applies to your Repton address specifically.
A two-storey rear extension almost always needs a full householder application to South Derbyshire District Council, as it sits outside permitted development on most homes. The council checks that it stays at least 7 metres from the rear boundary, does not overbear the neighbours and avoids new overlooking. We resolve the boundary gap, privacy and daylight on the plans so the application is decided on its merits. This applies to your Repton address specifically.
Frequently, yes. If the rear extension involves work to a shared wall, building up to the boundary, or excavating foundations near a neighbour's structure, the Party Wall etc. Act applies and you must serve notice — this is separate from South Derbyshire District Council's planning decision. We flag it early and can prepare the drawings a party-wall surveyor needs alongside the planning set. This applies to your Repton address specifically.
We price each Repton rear extension on its own footprint and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until South Derbyshire District Council approves, and we confirm at the outset whether your extension is permitted development, needs prior approval, or a full application. Call 020 7864 7245 to begin.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.