MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Rear extension drawings in Blackmore Vale — a glazed single-storey rear extension opening to the garden
Blackmore Vale · Rear Extension Drawings & Planning

Rear extension drawings in Blackmore Vale

Back-of-house extension drawings for Blackmore Vale homes — the glazed kitchen-diner across the rear, drawn to Dorset Council's depth and daylight limits, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Householder planning in Blackmore Vale — the record

Dorset Council granted 95% of the householder planning decisions it made in its latest published year — 8 points above the 87% England-wide householder average. Blackmore Vale contains Hazelbury Bryan Conservation Area, Ibberton Conservation Area, Mappowder Conservation Area conservation areas (Hazelbury Bryan Conservation Area designated 1995), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Blackmore Vale carries at least one Article 4 direction, and conservation areas including Hazelbury Bryan Conservation Area, Ibberton Conservation Area and Mappowder Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Blackmore Vale is determined against an 8-week statutory target.

Hazelbury Bryan (conservation area designated in 1995), Ibberton (conservation area designated in 1995), Mappowder (conservation area designated in 1995), Okeford Fitzpaine (conservation area designated in 1974), Shillingstone (conservation area designated in 1990), Woolland (civil parish within Blackmore Vale), Fifehead Neville (civil parish within Blackmore Vale), Hazelbury Bryan (civil parish within Blackmore Vale), Ibberton (civil parish within Blackmore Vale), Lydlinch (civil parish within Blackmore Vale) and Mappowder (civil parish within Blackmore Vale) — these are the Blackmore Vale pockets our drawings cover most. Heritage designations here include Hazelbury Bryan Conservation Area, Ibberton Conservation Area, Mappowder Conservation Area, Okeford Fitzpaine Conservation Area and Shillingstone Conservation Area. Dorset Council weighs each proposal against the adopted Dorset local plan and Dorset Council's design guidance for householder work, where the 1,910 homes here are 29% pre-1900, 12% 1945-1954, 12% 1993-1999, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and simple gabled and hipped roofs typical of early postwar building, over Victorian and earlier houses (29% of 1,910 homes), early postwar houses (12%) and 1990s estate houses (12%).

Blackmore Vale: the local constraints that decide your scheme

Before anything is drawn we check your address against the designations that apply in Blackmore Vale: Hazelbury Bryan (conservation area designated in 1995), Ibberton (conservation area designated in 1995), Mappowder (conservation area designated in 1995), Okeford Fitzpaine (conservation area designated in 1974) and Shillingstone (conservation area designated in 1990). Inside those boundaries permitted development is curtailed and Dorset Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Blackmore Vale takes in Woolland, Fifehead Neville, Hazelbury Bryan, Ibberton, Lydlinch and Mappowder. Dorset Council has 77 recorded Article 4 directions — check the address before assuming PD applies in Blackmore Vale.

On stock, Blackmore Vale is Victorian and earlier houses (29% of 1,910 homes), early postwar houses (12%) and 1990s estate houses (12%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and simple gabled and hipped roofs typical of early postwar building govern what a loft or rear projection can realistically be. Dorset Council decided 1,261 householder applications in the latest published year and granted 95%, with 78% issued inside the eight-week target. That decision record, not a national figure, is what we design to.

The full build-period split for Blackmore Vale runs pre-1900 29% (550 homes), 1900-1918 2% (30 homes), 1919-1929 3% (50 homes), 1930-1939 2% (40 homes), 1945-1954 12% (230 homes), 1955-1964 3% (50 homes), 1965-1972 7% (130 homes), 1973-1982 4% (80 homes), 1983-1992 5% (100 homes), 1993-1999 12% (230 homes) and 2000-2008 8% (160 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Dorset Council also decides for Beacon, Beaminster, Blandford, Chalk Valleys, Charminster St Mary's, Chickerell, Cranborne & Alderholt and Cranborne Chase, so a decision in Blackmore Vale sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include 1-3 The Lane, Kingston, Corfe Castle, 10 Cornwall Road, Swanage, 6 Burlington Road, Swanage and Avon Castle & Matchams Park Estate. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Blackmore Vale housing stock and council decisions, in figures

Published figures for Blackmore Vale and Dorset Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureBlackmore Vale
Dwellings recorded1,910
Built pre-1900550 (29%)
Built 1900-191830 (2%)
Built 1919-192950 (3%)
Built 1930-193940 (2%)
Built 1945-1954230 (12%)
Built 1955-196450 (3%)
Built 1965-1972130 (7%)
Built 1973-198280 (4%)
Built 1983-1992100 (5%)
Built 1993-1999230 (12%)
Built 2000-2008160 (8%)
Built before 191930%
Built 1919–19395%
Built 1945–200851%
Conservation areas in Blackmore Vale5 (Hazelbury Bryan Conservation Area, Ibberton Conservation Area…)
Conservation areas district-wide311
Article 4 directions recorded77
Householder applications decided1,261
Householder applications granted95%
Decided within 8 weeks78%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Dorset Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Rear extensions drawn to Dorset Council's depth and daylight limits

The rear extension is the workhorse of Blackmore Vale home improvement — it is how a dark back kitchen becomes an open family room facing the garden. Because the borough is built largely from Victorian and earlier houses (29% of 1,910 homes), early postwar houses (12%) and 1990s estate houses (12%), most back walls sit close to a neighbour on at least one side, and that proximity, not the design, is what Dorset Council scrutinises. The council reads the proposal against the adopted Dorset local plan and Dorset Council's design guidance for householder work, and the first line an officer draws is the 45-degree splay from the neighbour's nearest window.

So the drawings live or die on geometry. We set the depth against the exact permitted-development figure, hold the eaves and the flat-roof or lantern build-up under the 4-metre height ceiling, and show the projection tested against both the 45-degree plan angle and the 25-degree section angle to the neighbouring windows. Blackmore Vale contains Hazelbury Bryan Conservation Area, Ibberton Conservation Area, Mappowder Conservation Area conservation areas (Hazelbury Bryan Conservation Area designated 1995), so materials, fenestration and roof form are assessed against the appraisal, so the rear elevation is composed around it rather than corrected after an objection.

Where the property sits in a conservation area — Hazelbury Bryan Conservation Area, Ibberton Conservation Area, Mappowder Conservation Area, Okeford Fitzpaine Conservation Area and Shillingstone Conservation Area among Blackmore Vale's — the larger-home extension route is switched off and even a modest rear addition needs consent. Dorset Council has 77 recorded Article 4 directions — check the address before assuming PD applies in Blackmore Vale. We confirm the designation before the survey.

Isometric rear extension drawing for a Blackmore Vale house

Does a rear extension need planning permission in Blackmore Vale?

Many single-storey rear extensions in Blackmore Vale are permitted development and need no application. You will normally need to apply to Dorset Council, or use the larger-home prior-approval route, if any of these apply:

  • The extension projects more than 3 metres from the original rear wall on a terrace or semi (4 metres on a detached house)
  • You want 6 metres (terrace/semi) or 8 metres (detached) — allowed only via the larger-home prior-approval scheme, with neighbour consultation
  • It is a two-storey rear extension, or any part is higher than 4 metres
  • A two-storey rear extension would come within 7 metres of the rear boundary
  • Your home is in a conservation area such as Hazelbury Bryan Conservation Area and Ibberton Conservation Area, where the larger-home route does not apply
  • An Article 4 direction covers your street — Blackmore Vale operates several, so this is checked first

Blackmore Vale rear extension approval rates — live from council data

Below is Dorset Council's real householder decision record, taken from official planning statistics and refreshed as new data lands. Dorset Council granted 95% of its householder applications in the year to 31 March 2026, and Hazelbury Bryan Conservation Area shapes what is approved here. Rear extensions turn most often on neighbour daylight and depth, so a drawing pack that proves those tests upfront is decided faster and refused less often than a DIY submission.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

95%householder applications approved in Dorset
87%national average — Dorset is 8 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What rear extensions get approved in Blackmore Vale

Across Hazelbury Bryan, Ibberton and Mappowder, the approved rear extension is typically a single-storey glazed box within the depth limit, roofed either flat with a lantern or in a shallow mono-pitch, and finished in brick or render to match the host wall. On the borough's victorian and earlier houses (29% of 1,910 homes), keeping the projection to the permitted-development figure often avoids an application entirely; where owners want the full 6 metres, the larger-home route succeeds when the neighbour-consultation period passes without a sustained objection.

The 1,910 homes here are 29% pre-1900, 12% 1945-1954, 12% 1993-1999, which is what sets the realistic roof and rear-projection options. We keep the extension inside the daylight splays, set any glazed roof below the first-floor cill, and retain the garden depth Dorset Council expects — so the back elevation answers the amenity case before a neighbour can lodge one. Two-storey rear extensions we draw with the 7-metre boundary gap and privacy screening resolved on the plan.

Open-plan living space created by a rear extension in Blackmore Vale

Rear extensions across Blackmore Vale

We draw rear extensions on every street in the borough. A few of the neighbourhoods where Blackmore Vale back-of-house projects come up most often:

Hazelbury Bryan

Rear extension drawings for Hazelbury Bryan's conservation area designated in 1995 — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Ibberton

Rear extension drawings for Ibberton's conservation area designated in 1995 — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Mappowder

Rear extension drawings for Mappowder's conservation area designated in 1995 — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Okeford Fitzpaine

Rear extension drawings for Okeford Fitzpaine's conservation area designated in 1974 — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Shillingstone

Rear extension drawings for Shillingstone's conservation area designated in 1990 — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Woolland

Rear extension drawings for Woolland's civil parish within Blackmore Vale — depth-checked, daylight-tested and drawn to Dorset Council's guidance.

Which rear extension route suits your Blackmore Vale house?

How far you can extend at the back in Blackmore Vale depends on your house type and the route you take. This is how the options compare.

RouteDepth allowedConsent neededWhat Dorset Council checks
Standard permitted development3m terrace/semi · 4m detachedLawful development certificate (optional)Depth, 4m height, materials
Larger-home prior approval6m terrace/semi · 8m detachedPrior-approval notice + neighbour consultationNeighbour objections on amenity
Full householder applicationBeyond the above, or two-storeyFull planning permissionDaylight (45°/25°), bulk, garden retained
Conservation areaCase by caseFull planning permissionCharacter, roof form, boundary treatment

The larger-home route is switched off on designated land — conservation areas such as Hazelbury Bryan Conservation Area and Ibberton Conservation Area and Article 4 streets need a full application.

Four steps to an approved Blackmore Vale rear extension

A fixed process built around how Dorset Council validates and decides rear-extension applications — most drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Blackmore Vale postcode and house type. We confirm your conservation and Article 4 status, how much rear-extension depth you have under permitted development, and score your odds against live Dorset Council decisions.

  2. 2

    Measured survey

    We measure the original rear wall, floor and eaves levels, side and rear boundary distances and the neighbours' window positions — the numbers the depth limit and daylight splays depend on.

  3. 3

    Rear extension design & drawings

    Chartered designers develop the single or two-storey rear extension to your brief, drawn inside the permitted-development limits or to Dorset Council's extension design guidance, with the daylight angles shown.

  4. 4

    Submission & follow-through

    We submit the certificate, prior-approval notice or application, handle validation and case-officer queries, and revise the drawings free until Dorset Council issues its decision.

Frequently asked questions

Does a rear extension need planning permission in Blackmore Vale?

Often not. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development in Blackmore Vale. You will need to involve Dorset Council for anything deeper via the larger-home route, for two-storey rear extensions, and for any rear extension in a conservation area such as Hazelbury Bryan Conservation Area and Ibberton Conservation Area, where those permitted-development rights fall away.

How far can I extend to the rear in Blackmore Vale under the 6-metre rule?

The larger-home extension scheme lets a single-storey rear extension reach 6 metres on a terrace or semi, or 8 metres on a detached house — double the standard allowance. It is not automatic: you submit a prior-approval notification to Dorset Council, neighbours are consulted, and if one objects on amenity grounds the council rules on it. It also does not apply on designated land such as Blackmore Vale's conservation areas.

What is the 45-degree rule for rear extensions in Blackmore Vale?

It is the daylight test Dorset Council applies to protect neighbours. Drawn on plan, a line at 45 degrees from the midpoint of the neighbour's nearest ground-floor window should not be crossed by your extension; a companion 25-degree line is checked in section. If the projection breaches it, the extension is likely to be shortened or refused, so we test and prove it on the drawings before submission. This applies to your Blackmore Vale address specifically.

Can I build a two-storey rear extension in Blackmore Vale?

A two-storey rear extension almost always needs a full householder application to Dorset Council, as it sits outside permitted development on most homes. The council checks that it stays at least 7 metres from the rear boundary, does not overbear the neighbours and avoids new overlooking. We resolve the boundary gap, privacy and daylight on the plans so the application is decided on its merits. This applies to your Blackmore Vale address specifically.

Do I need a party wall agreement for a rear extension in Blackmore Vale?

Frequently, yes. If the rear extension involves work to a shared wall, building up to the boundary, or excavating foundations near a neighbour's structure, the Party Wall etc. Act applies and you must serve notice — this is separate from Dorset Council's planning decision. We flag it early and can prepare the drawings a party-wall surveyor needs alongside the planning set. This applies to your Blackmore Vale address specifically.

How much do rear extension drawings in Blackmore Vale cost?

We price each Blackmore Vale rear extension on its own footprint and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Dorset Council approves, and we confirm at the outset whether your extension is permitted development, needs prior approval, or a full application. Call 020 7864 7245 to begin.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Rear extension drawings across Dorset

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Blackmore Vale