MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Porch extension plans in Tetbury with Upton — a front porch built onto the principal elevation of a house
Tetbury with Upton · Porch Drawings & Planning

Porch extension plans in Tetbury with Upton

Front-porch drawings for Tetbury with Upton homes — checked against the Class D permitted-development limits, drawn to Cotswold District Council's frontage guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Householder planning in Tetbury with Upton — the record

Cotswold District Council granted 92% of the householder planning decisions it made in its latest published year — 5 points above the 87% England-wide householder average. Tetbury with Upton contains the Doughton Highgrove Conservation Area conservation area (Doughton Highgrove Conservation Area designated 1990), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.

The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. Tetbury with Upton carries at least one Article 4 direction, and conservation areas including Doughton Highgrove Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Tetbury with Upton is determined against an 8-week statutory target.

Doughton Highgrove (conservation area designated in 1990), Tetbury (civil parish within Tetbury with Upton) and Tetbury Upton (civil parish within Tetbury with Upton) — these are the Tetbury with Upton pockets our drawings cover most. Heritage designations here include Doughton Highgrove Conservation Area. Cotswold District Council weighs each proposal against Cotswold District Council's adopted local plan and its householder design guidance, where the 1,500 homes here are 28% pre-1900, 11% 1983-1992, 11% 1993-1999, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building, over Victorian and earlier houses (28% of 1,500 homes), 1980s estate houses (11%) and 1990s estate houses (11%).

Tetbury with Upton: the local constraints that decide your scheme

Before anything is drawn we check your address against the designations that apply in Tetbury with Upton: Doughton Highgrove (conservation area designated in 1990). Inside those boundaries permitted development is curtailed and Cotswold District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Tetbury with Upton takes in Tetbury and Tetbury Upton. Cotswold District Council has 22 recorded Article 4 directions, removing permitted development for rear and side extensions and roof enlargements such as dormers — check the address before assuming PD applies in Tetbury with Upton.

On stock, Tetbury with Upton is Victorian and earlier houses (28% of 1,500 homes), 1980s estate houses (11%) and 1990s estate houses (11%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building govern what a loft or rear projection can realistically be. Cotswold District Council decided 592 householder applications in the latest published year and granted 92%, with 53% issued inside the eight-week target. That decision record, not a national figure, is what we design to.

The full build-period split for Tetbury with Upton runs pre-1900 28% (420 homes), 1919-1929 1% (10 homes), 1930-1939 5% (70 homes), 1945-1954 10% (150 homes), 1955-1964 6% (90 homes), 1965-1972 9% (140 homes), 1973-1982 7% (100 homes), 1983-1992 11% (170 homes), 1993-1999 11% (160 homes) and 2000-2008 5% (80 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Cotswold District Council also decides for Abbey, Blockley, Bourton Vale, Bourton Village, Campden & Vale, Fairford North, Fosseridge and Kemble, so a decision in Tetbury with Upton sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Article 4 (2) Direction Avening, Article 4 (2) Direction Bibury, Article 4 (2) Direction Blockley and Article 4 (2) Direction Bourton-On-The-Water. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Tetbury with Upton housing stock and council decisions, in figures

Published figures for Tetbury with Upton and Cotswold District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureTetbury with Upton
Dwellings recorded1,500
Built pre-1900420 (28%)
Built 1919-192910 (1%)
Built 1930-193970 (5%)
Built 1945-1954150 (10%)
Built 1955-196490 (6%)
Built 1965-1972140 (9%)
Built 1973-1982100 (7%)
Built 1983-1992170 (11%)
Built 1993-1999160 (11%)
Built 2000-200880 (5%)
Built before 191928%
Built 1919–19395%
Built 1945–200859%
Conservation areas in Tetbury with Upton1 (Doughton Highgrove Conservation Area)
Conservation areas district-wide144
Article 4 directions recorded22
Householder applications decided592
Householder applications granted92%
Decided within 8 weeks53%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Cotswold District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Why a porch is judged on the Tetbury with Upton street, not the plan

A porch is the smallest thing most people build and the most visible. It sits on the principal elevation, so Cotswold District Council reads it against the rhythm of the whole street rather than against your own house alone. Tetbury with Upton is largely Victorian and earlier houses (28% of 1,500 homes), 1980s estate houses (11%) and 1990s estate houses (11%), and where a run of houses shares one front-door detail, a porch that ignores it stands out from fifty metres away.

The three Class D numbers do most of the work: 3 square metres of external floor area, 3 metres of height, and a 2-metre stand-off from any boundary that fronts a highway. That last one catches more porches in Tetbury with Upton than the other two put together, because front gardens are shallow and the boundary is measured to the highway line, not to the kerb. We measure it on site and set the porch inside the limit, or we tell you honestly that it needs an application.

In Tetbury with Upton's conservation areas — Doughton Highgrove Conservation Area among them — a porch is assessed on materials, roof form and how the door surround is treated. Cotswold District Council has 22 recorded Article 4 directions, removing permitted development for rear and side extensions and roof enlargements such as dormers — check the address before assuming PD applies in Tetbury with Upton.

Porch design drawing prepared for a Tetbury with Upton house frontage

Does a porch need planning permission in Tetbury with Upton?

Most modest porches are permitted development. You will need to apply to Cotswold District Council if any of these apply:

  • The external floor area measures more than 3 square metres
  • Any part of the porch stands higher than 3 metres above ground level
  • Any part sits within 2 metres of a boundary that fronts a highway
  • The house is in a conservation area such as Doughton Highgrove Conservation Area, where frontage changes are controlled
  • The building is listed — listed building consent is required whatever the size
  • An Article 4 direction applies to your street — Cotswold District Council operates directions that can remove this right
  • The porch encloses a shared entrance to flats rather than a single house

Tetbury with Upton porch decisions — live from council data

Below is Cotswold District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Cotswold District Council granted 92% of its householder applications in the year to 31 March 2026, and Doughton Highgrove Conservation Area shapes what is approved here. A porch application turns on frontage design and the highway stand-off, so a pack that dimensions both is decided faster than a sketch.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

92%householder applications approved in Cotswold
87%national average — Cotswold is 5 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What porches get approved across Tetbury with Upton

Across Doughton Highgrove, Tetbury and Tetbury Upton, the porches that go through are the ones that borrow from the house: the same brick or render, a roof pitched to match, and a door and side-light proportioned to the original opening. On victorian and earlier houses (28% of 1,500 homes), an open-sided canopy is often the better answer than an enclosed porch — it stays clear of the floor-area limit and leaves the frontage legible.

Tetbury with Upton contains the Doughton Highgrove Conservation Area conservation area (Doughton Highgrove Conservation Area designated 1990), so materials, fenestration and roof form are assessed against the appraisal, which is exactly the sort of local reading a porch has to satisfy. Where the 2-metre highway stand-off cannot be met, we either recess the porch behind the building line or prepare a full householder application with an elevation that shows the porch in the context of its neighbours — the drawing that answers the officer's real question.

Drawing pack for a porch application in Tetbury with Upton

Porch drawings across Tetbury with Upton

We draw porches on every street type in Tetbury with Upton. A few of the areas where porch work comes up most often:

Doughton Highgrove

Porch drawings for Doughton Highgrove — conservation area designated in 1990 — dimensioned to the Class D limits and drawn to Cotswold District Council's frontage guidance.

Tetbury

Porch drawings for Tetbury — civil parish within Tetbury with Upton — dimensioned to the Class D limits and drawn to Cotswold District Council's frontage guidance.

Tetbury Upton

Porch drawings for Tetbury Upton — civil parish within Tetbury with Upton — dimensioned to the Class D limits and drawn to Cotswold District Council's frontage guidance.

Is your Tetbury with Upton porch permitted development or a full application?

Class D sets three thresholds. This is how the common cases fall either side of them.

Porch typePermitted development?What decides itWhat Cotswold District Council checks
Open canopy over the doorUsually yes — no enclosed floor areaWhether it is enclosedProjection, materials, roof form
Enclosed porch under 3m²Yes, if under 3m high and 2m from the highway boundaryExternal floor areaHighway stand-off, frontage design
Enclosed porch over 3m²No — full applicationExternal floor areaBulk on the principal elevation
Porch in a conservation areaOnly if it meets Class D and no Article 4 appliesDesignation statusMaterials, door detail, streetscape
Porch on a listed buildingNo — listed building consent requiredListingImpact on special interest

Thresholds from the Town and Country Planning (General Permitted Development) (England) Order 2015, Schedule 2, Part 1, Class D.

Four steps to an approved Tetbury with Upton porch

A fixed process built around how Cotswold District Council validates and decides frontage work — most porch drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Tetbury with Upton postcode. We confirm conservation, Article 4 and listing status, measure the front boundary against the 2-metre highway rule, and score your odds against live Cotswold District Council decisions.

  2. 2

    Measured survey

    We measure the frontage, threshold level, door opening and the distance to the highway boundary — the four numbers a porch application stands or falls on.

  3. 3

    Porch design & drawings

    Chartered designers develop the porch to your brief, either inside the Class D limits or as a full application drawn to Cotswold District Council's design guidance, with materials and roof form matched to the house.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Cotswold District Council issues its decision.

Frequently asked questions

Do I need planning permission for a porch in Tetbury with Upton?

Usually not, provided it meets all three Class D limits: no more than 3 square metres of external floor area, no more than 3 metres high, and no part within 2 metres of a boundary fronting a highway. Break any one and you need a householder application to Cotswold District Council. On designated land, and on listed buildings, the position is different and we check it before drawing. This applies to your Tetbury with Upton address specifically.

How is the 3 square metres measured on a Tetbury with Upton porch?

It is the external floor area — measured to the outside face of the porch walls, not the usable space inside. That catches people out, because a porch that feels small internally can exceed 3 square metres once the wall thickness is counted. We measure and dimension it on the plan so the figure is beyond argument at validation. This applies to your Tetbury with Upton address specifically. Cotswold District Council is the decision-maker.

What is the 2 metre highway rule for porches in Tetbury with Upton?

No part of a permitted-development porch may be within 2 metres of any boundary of the property that fronts a highway. In Tetbury with Upton this is the limit that most often pushes a porch into a full application, because front gardens are shallow. The measurement is to the boundary line, which is not always where the kerb or the fence sits — we establish it on survey. Cotswold District Council is the decision-maker.

Can I build a porch in a Tetbury with Upton conservation area?

Yes, but the design bar is higher. Class D is not automatically removed in a conservation area, so a compliant porch can still be permitted development — however Cotswold District Council will expect materials, roof pitch and door detail to respect the area's character, and an Article 4 direction can remove the right entirely. In Doughton Highgrove Conservation Area we confirm the position on your specific address first. This applies to your Tetbury with Upton address specifically.

Does a porch need building regulations approval in Tetbury with Upton?

A porch is exempt from most building regulations if it is under 30 square metres, at ground level, separated from the house by the existing external door, and any glazing and electrics meet Parts K, N and P. Remove the original front door and the porch becomes part of the heated envelope, at which point insulation and Part L apply. We flag which side of that line your design falls on. This applies to your Tetbury with Upton address specifically. Cotswold District Council is the decision-maker.

How long does Cotswold District Council take to decide a porch application?

A householder application runs to an eight-week statutory target, and a lawful development certificate to the same. The realistic risk is not the decision but validation — an incomplete pack is returned rather than determined. We prepare the submission validation-complete and handle officer queries so the timetable holds. This applies to your Tetbury with Upton address specifically. Cotswold District Council is the decision-maker.

How much do porch plans in Tetbury with Upton cost?

We quote each Tetbury with Upton porch individually, because frontage type and boundary position vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Cotswold District Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Porch extension plans across Cotswold

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Tetbury with Upton