MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Porch extension plans in Lickey Hills — a front porch built onto the principal elevation of a house
Lickey Hills · Porch Drawings & Planning

Porch extension plans in Lickey Hills

Front-porch drawings for Lickey Hills homes — checked against the Class D permitted-development limits, drawn to Bromsgrove District Council's frontage guidance, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

What the data says about planning in Lickey Hills

Bromsgrove District Council granted 96% of the householder planning decisions it made in its latest published year — 9 points above the 87% England-wide householder average. Lickey Hills contains the Barnt Green conservation area (Barnt Green designated 2000), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.

Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Bromsgrove District Council needs a full application. In conservation areas such as Barnt Green those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Lickey Hills is determined against an 8-week statutory target.

Barnt Green (conservation area designated in 2000) and Lickey and Blackwell (civil parish within Lickey Hills) — these are the Lickey Hills pockets our drawings cover most. Heritage designations here include Barnt Green. Bromsgrove District Council weighs each proposal against Bromsgrove District Council's adopted local plan and its householder design guidance, where the 1,610 homes here are 18% 1983-1992, 13% 1993-1999, 11% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 1980s building and trussed-rafter roofs typical of 1990s building, over 1980s estate houses (18% of 1,610 homes), 1990s estate houses (13%) and Victorian and earlier houses (11%).

Designations, stock and decisions in Lickey Hills

Heritage designation is the single biggest variable in Lickey Hills, and it is address-specific: Barnt Green (conservation area designated in 2000). Inside those boundaries permitted development is curtailed and Bromsgrove District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Lickey Hills takes in Lickey and Blackwell. No Article 4 direction is recorded for Bromsgrove District Council, but Lickey Hills's 1 conservation area still limit permitted development on those streets.

On stock, Lickey Hills is 1980s estate houses (18% of 1,610 homes), 1990s estate houses (13%) and Victorian and earlier houses (11%) — which is why trussed-rafter roofs typical of 1980s building and trussed-rafter roofs typical of 1990s building govern what a loft or rear projection can realistically be. Bromsgrove District Council decided 288 householder applications in the latest published year and granted 96%, with 62% issued inside the eight-week target. We work from the council's own published record.

The full build-period split for Lickey Hills runs pre-1900 11% (170 homes), 1900-1918 9% (140 homes), 1919-1929 11% (170 homes), 1930-1939 8% (130 homes), 1945-1954 1% (10 homes), 1955-1964 6% (90 homes), 1965-1972 7% (110 homes), 1973-1982 7% (110 homes), 1983-1992 18% (290 homes), 1993-1999 13% (210 homes) and 2000-2008 4% (70 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Bromsgrove District Council also decides for Belbroughton & Romsley, Sanders Park and Tardebigge, so a decision in Lickey Hills sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The published numbers behind a Lickey Hills application

Published figures for Lickey Hills and Bromsgrove District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureLickey Hills
Dwellings recorded1,610
Built pre-1900170 (11%)
Built 1900-1918140 (9%)
Built 1919-1929170 (11%)
Built 1930-1939130 (8%)
Built 1945-195410 (1%)
Built 1955-196490 (6%)
Built 1965-1972110 (7%)
Built 1973-1982110 (7%)
Built 1983-1992290 (18%)
Built 1993-1999210 (13%)
Built 2000-200870 (4%)
Built before 191919%
Built 1919–193919%
Built 1945–200855%
Conservation areas in Lickey Hills1 (Barnt Green)
Conservation areas district-wide12
Article 4 directions recorded0
Householder applications decided288
Householder applications granted96%
Decided within 8 weeks62%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Bromsgrove District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Why a porch is judged on the Lickey Hills street, not the plan

A porch is the smallest thing most people build and the most visible. It sits on the principal elevation, so Bromsgrove District Council reads it against the rhythm of the whole street rather than against your own house alone. Lickey Hills is largely 1980s estate houses (18% of 1,610 homes), 1990s estate houses (13%) and Victorian and earlier houses (11%), and where a run of houses shares one front-door detail, a porch that ignores it stands out from fifty metres away.

The three Class D numbers do most of the work: 3 square metres of external floor area, 3 metres of height, and a 2-metre stand-off from any boundary that fronts a highway. That last one catches more porches in Lickey Hills than the other two put together, because front gardens are shallow and the boundary is measured to the highway line, not to the kerb. We measure it on site and set the porch inside the limit, or we tell you honestly that it needs an application.

In Lickey Hills's conservation areas — Barnt Green among them — a porch is assessed on materials, roof form and how the door surround is treated. No Article 4 direction is recorded for Bromsgrove District Council, but Lickey Hills's 1 conservation area still limit permitted development on those streets.

Porch design drawing prepared for a Lickey Hills house frontage

Does a porch need planning permission in Lickey Hills?

Most modest porches are permitted development. You will need to apply to Bromsgrove District Council if any of these apply:

  • The external floor area measures more than 3 square metres
  • Any part of the porch stands higher than 3 metres above ground level
  • Any part sits within 2 metres of a boundary that fronts a highway
  • The house is in a conservation area such as Barnt Green, where frontage changes are controlled
  • The building is listed — listed building consent is required whatever the size
  • The porch encloses a shared entrance to flats rather than a single house

Lickey Hills porch decisions — live from council data

Below is Bromsgrove District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Bromsgrove District Council granted 96% of its householder applications in the year to 31 March 2026, and Barnt Green shapes what is approved here. A porch application turns on frontage design and the highway stand-off, so a pack that dimensions both is decided faster than a sketch.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

96%householder applications approved in Bromsgrove
87%national average — Bromsgrove is 9 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What porches get approved across Lickey Hills

Across Barnt Green and Lickey and Blackwell, the porches that go through are the ones that borrow from the house: the same brick or render, a roof pitched to match, and a door and side-light proportioned to the original opening. On 1980s estate houses (18% of 1,610 homes), an open-sided canopy is often the better answer than an enclosed porch — it stays clear of the floor-area limit and leaves the frontage legible.

Lickey Hills contains the Barnt Green conservation area (Barnt Green designated 2000), so materials, fenestration and roof form are assessed against the appraisal, which is exactly the sort of local reading a porch has to satisfy. Where the 2-metre highway stand-off cannot be met, we either recess the porch behind the building line or prepare a full householder application with an elevation that shows the porch in the context of its neighbours — the drawing that answers the officer's real question.

Drawing pack for a porch application in Lickey Hills

Porch drawings across Lickey Hills

We draw porches on every street type in Lickey Hills. A few of the areas where porch work comes up most often:

Barnt Green

Porch drawings for Barnt Green — conservation area designated in 2000 — dimensioned to the Class D limits and drawn to Bromsgrove District Council's frontage guidance.

Lickey and Blackwell

Porch drawings for Lickey and Blackwell — civil parish within Lickey Hills — dimensioned to the Class D limits and drawn to Bromsgrove District Council's frontage guidance.

Is your Lickey Hills porch permitted development or a full application?

Class D sets three thresholds. This is how the common cases fall either side of them.

Porch typePermitted development?What decides itWhat Bromsgrove District Council checks
Open canopy over the doorUsually yes — no enclosed floor areaWhether it is enclosedProjection, materials, roof form
Enclosed porch under 3m²Yes, if under 3m high and 2m from the highway boundaryExternal floor areaHighway stand-off, frontage design
Enclosed porch over 3m²No — full applicationExternal floor areaBulk on the principal elevation
Porch in a conservation areaOnly if it meets Class D and no Article 4 appliesDesignation statusMaterials, door detail, streetscape
Porch on a listed buildingNo — listed building consent requiredListingImpact on special interest

Thresholds from the Town and Country Planning (General Permitted Development) (England) Order 2015, Schedule 2, Part 1, Class D.

Four steps to an approved Lickey Hills porch

A fixed process built around how Bromsgrove District Council validates and decides frontage work — most porch drawings are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Lickey Hills postcode. We confirm conservation, Article 4 and listing status, measure the front boundary against the 2-metre highway rule, and score your odds against live Bromsgrove District Council decisions.

  2. 2

    Measured survey

    We measure the frontage, threshold level, door opening and the distance to the highway boundary — the four numbers a porch application stands or falls on.

  3. 3

    Porch design & drawings

    Chartered designers develop the porch to your brief, either inside the Class D limits or as a full application drawn to Bromsgrove District Council's design guidance, with materials and roof form matched to the house.

  4. 4

    Submission & follow-through

    We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Bromsgrove District Council issues its decision.

Frequently asked questions

Do I need planning permission for a porch in Lickey Hills?

Usually not, provided it meets all three Class D limits: no more than 3 square metres of external floor area, no more than 3 metres high, and no part within 2 metres of a boundary fronting a highway. Break any one and you need a householder application to Bromsgrove District Council. On designated land, and on listed buildings, the position is different and we check it before drawing. This applies to your Lickey Hills address specifically.

How is the 3 square metres measured on a Lickey Hills porch?

It is the external floor area — measured to the outside face of the porch walls, not the usable space inside. That catches people out, because a porch that feels small internally can exceed 3 square metres once the wall thickness is counted. We measure and dimension it on the plan so the figure is beyond argument at validation. This applies to your Lickey Hills address specifically. Bromsgrove District Council is the decision-maker.

What is the 2 metre highway rule for porches in Lickey Hills?

No part of a permitted-development porch may be within 2 metres of any boundary of the property that fronts a highway. In Lickey Hills this is the limit that most often pushes a porch into a full application, because front gardens are shallow. The measurement is to the boundary line, which is not always where the kerb or the fence sits — we establish it on survey. Bromsgrove District Council is the decision-maker.

Can I build a porch in a Lickey Hills conservation area?

Yes, but the design bar is higher. Class D is not automatically removed in a conservation area, so a compliant porch can still be permitted development — however Bromsgrove District Council will expect materials, roof pitch and door detail to respect the area's character, and an Article 4 direction can remove the right entirely. In Barnt Green we confirm the position on your specific address first. This applies to your Lickey Hills address specifically.

Does a porch need building regulations approval in Lickey Hills?

A porch is exempt from most building regulations if it is under 30 square metres, at ground level, separated from the house by the existing external door, and any glazing and electrics meet Parts K, N and P. Remove the original front door and the porch becomes part of the heated envelope, at which point insulation and Part L apply. We flag which side of that line your design falls on. This applies to your Lickey Hills address specifically. Bromsgrove District Council is the decision-maker.

How long does Bromsgrove District Council take to decide a porch application?

A householder application runs to an eight-week statutory target, and a lawful development certificate to the same. The realistic risk is not the decision but validation — an incomplete pack is returned rather than determined. We prepare the submission validation-complete and handle officer queries so the timetable holds. This applies to your Lickey Hills address specifically. Bromsgrove District Council is the decision-maker.

How much do porch plans in Lickey Hills cost?

We quote each Lickey Hills porch individually, because frontage type and boundary position vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Bromsgrove District Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Porch extension plans across Bromsgrove

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Lickey Hills