MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Walland & Denge Marsh home — scaled plans and elevations ready for submission
Walland & Denge Marsh · Planning Application Drawings & Submission

Planning application drawings in Walland & Denge Marsh

The full drawing set for a Walland & Denge Marsh application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Folkestone and Hythe Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Walland & Denge Marsh planning decisions and design rules

Folkestone and Hythe Council granted 88% of the householder planning decisions it made in its latest published year — 1 point above the 87% England-wide householder average. Walland & Denge Marsh contains Brookland, Dungeness, Lydd conservation areas (Brookland designated 1973), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Brookland, Dungeness and Lydd those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Walland & Denge Marsh is determined against an 8-week statutory target.

Brookland (conservation area designated in 1973), Dungeness (conservation area designated in 1985), Lydd (conservation area designated in 1973), Old Romney (conservation area designated in 1973), Brenzett (civil parish within Walland & Denge Marsh), Brookland (civil parish within Walland & Denge Marsh), Ivychurch (civil parish within Walland & Denge Marsh), Lydd (civil parish within Walland & Denge Marsh), Old Romney (civil parish within Walland & Denge Marsh) and Snargate (civil parish within Walland & Denge Marsh) — these are the Walland & Denge Marsh pockets our drawings cover most. Heritage designations here include Brookland, Dungeness, Lydd and Old Romney. Folkestone and Hythe Council weighs each proposal against the adopted Folkestone and Hythe local plan and Folkestone and Hythe Council's design guidance for householder work, where the 3,570 homes here are 18% 1965-1972, 17% pre-1900, 10% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over late-1960s and early-1970s houses (18% of 3,570 homes), Victorian and earlier houses (17%) and late-1950s and early-1960s houses (10%).

Why a Walland & Denge Marsh scheme is judged on Walland & Denge Marsh terms

What is permitted in Walland & Denge Marsh turns on designation first, so that is where we start: Brookland (conservation area designated in 1973), Dungeness (conservation area designated in 1985), Lydd (conservation area designated in 1973) and Old Romney (conservation area designated in 1973). Inside those boundaries permitted development is curtailed and Folkestone and Hythe Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Walland & Denge Marsh takes in Brenzett, Brookland, Ivychurch, Lydd, Old Romney and Snargate. No Article 4 direction is recorded for Folkestone and Hythe Council, but Walland & Denge Marsh's 4 conservation areas still limit permitted development on those streets.

On stock, Walland & Denge Marsh is late-1960s and early-1970s houses (18% of 3,570 homes), Victorian and earlier houses (17%) and late-1950s and early-1960s houses (10%) — which is why shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Folkestone and Hythe Council decided 345 householder applications in the latest published year and granted 88%, with 96% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Walland & Denge Marsh runs pre-1900 17% (590 homes), 1900-1918 2% (80 homes), 1919-1929 6% (200 homes), 1930-1939 3% (110 homes), 1945-1954 7% (260 homes), 1955-1964 10% (370 homes), 1965-1972 18% (630 homes), 1973-1982 10% (360 homes), 1983-1992 10% (340 homes), 1993-1999 3% (120 homes) and 2000-2008 8% (270 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Folkestone and Hythe Council also decides for Hythe, Hythe Rural, New Romney, North Downs East, North Downs West and Romney Marsh, so a decision in Walland & Denge Marsh sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Walland & Denge Marsh by the published data

Published figures for Walland & Denge Marsh and Folkestone and Hythe Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureWalland & Denge Marsh
Dwellings recorded3,570
Built pre-1900590 (17%)
Built 1900-191880 (2%)
Built 1919-1929200 (6%)
Built 1930-1939110 (3%)
Built 1945-1954260 (7%)
Built 1955-1964370 (10%)
Built 1965-1972630 (18%)
Built 1973-1982360 (10%)
Built 1983-1992340 (10%)
Built 1993-1999120 (3%)
Built 2000-2008270 (8%)
Built before 191919%
Built 1919–19399%
Built 1945–200866%
Conservation areas in Walland & Denge Marsh4 (Brookland, Dungeness…)
Conservation areas district-wide21
Article 4 directions recorded0
Householder applications decided345
Householder applications granted88%
Decided within 8 weeks96%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Folkestone and Hythe Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Walland & Denge Marsh planning application

Whatever you are building, Folkestone and Hythe Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Folkestone and Hythe Council assesses each proposal against the adopted Folkestone and Hythe local plan and Folkestone and Hythe Council's design guidance for householder work, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Walland & Denge Marsh's stock, which runs to late-1960s and early-1970s houses (18% of 3,570 homes), Victorian and earlier houses (17%) and late-1950s and early-1960s houses (10%), the same scheme is drawn differently to answer the concerns officers raise here. Walland & Denge Marsh contains Brookland, Dungeness, Lydd conservation areas (Brookland designated 1973), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Brookland, Dungeness, Lydd and Old Romney among Walland & Denge Marsh's — validation is stricter still, often demanding heritage detail and sometimes additional plans. No Article 4 direction is recorded for Folkestone and Hythe Council, but Walland & Denge Marsh's 4 conservation areas still limit permitted development on those streets. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Walland & Denge Marsh application

What drawings do I need for a planning application in Walland & Denge Marsh?

Folkestone and Hythe Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Folkestone and Hythe Council requires one — larger schemes and most work in a conservation area

Walland & Denge Marsh planning decisions — live from council data

Below is Folkestone and Hythe Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Folkestone and Hythe Council granted 88% of its householder applications in the year to 31 March 2026, and Brookland shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

88%householder applications approved in Folkestone and Hythe
87%national average — Folkestone and Hythe is 1 point above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Walland & Denge Marsh applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Folkestone and Hythe Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Walland & Denge Marsh applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 3,570 homes here are 18% 1965-1972, 17% pre-1900, 10% 1955-1964, which is what sets the realistic roof and rear-projection options. Across Brookland, Dungeness and Lydd the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Walland & Denge Marsh planning application

Applications we draw across Walland & Denge Marsh

The application pack is the same discipline whatever the project. A few of the Walland & Denge Marsh neighbourhoods and property types we prepare drawings for most often:

Brookland

Planning drawings for Brookland's conservation area designated in 1973 — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Dungeness

Planning drawings for Dungeness's conservation area designated in 1985 — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Lydd

Planning drawings for Lydd's conservation area designated in 1973 — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Old Romney

Planning drawings for Old Romney's conservation area designated in 1973 — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Brenzett

Planning drawings for Brenzett's civil parish within Walland & Denge Marsh — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Brookland

Planning drawings for Brookland's civil parish within Walland & Denge Marsh — scaled, validation-ready and drawn to Folkestone and Hythe Council's guidance.

Which application do I make in Walland & Denge Marsh?

The route decides what Folkestone and Hythe Council needs and how long it takes. This is how the common Walland & Denge Marsh routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Brookland and Dungeness, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Walland & Denge Marsh application

A fixed process built around how Folkestone and Hythe Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Walland & Denge Marsh postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Folkestone and Hythe Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Folkestone and Hythe Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Folkestone and Hythe Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Walland & Denge Marsh?

Folkestone and Hythe Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Walland & Denge Marsh address specifically.

Why do Walland & Denge Marsh planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Folkestone and Hythe Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Walland & Denge Marsh address specifically.

Can you submit the Walland & Denge Marsh planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Folkestone and Hythe Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Walland & Denge Marsh address specifically.

How long does Folkestone and Hythe Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Folkestone and Hythe Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Walland & Denge Marsh address specifically.

Do I need planning drawings if my project is permitted development in Walland & Denge Marsh?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Folkestone and Hythe Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Brookland and Dungeness, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Walland & Denge Marsh address specifically.

How much do planning application drawings in Walland & Denge Marsh cost?

We price each Walland & Denge Marsh job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Folkestone and Hythe Council decides. The Folkestone and Hythe Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Folkestone and Hythe

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Walland & Denge Marsh