MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Town home — scaled plans and elevations ready for submission
Town · Planning Application Drawings & Submission

Planning application drawings in Town

The full drawing set for a Town application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Gravesham Borough Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Town planning decisions and design rules

Gravesham Borough Council granted 78% of the householder planning decisions it made in its latest published year — 9 points below the 87% England-wide householder average. Town contains Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area, King Street, Gravesend Conservation Area conservation areas (Harmer Street, Gravesend Conservation Area designated 1975), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and Edwardian (1901–1910) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area and King Street, Gravesend Conservation Area those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Town is determined against an 8-week statutory target.

Harmer Street, Gravesend (conservation area designated in 1975), High Street & Queen Street, Gravesend (conservation area designated in 1975), King Street, Gravesend (conservation area designated in 1980), Milton Place, Gravesend (conservation area designated in 1990), Riverside, Gravesend (conservation area designated in 1980) and Upper Windmill Street, Gravesend (conservation area designated in 1980) — these are the Town pockets our drawings cover most. Heritage designations here include Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area, King Street, Gravesend Conservation Area, Milton Place, Gravesend Conservation Area, Riverside, Gravesend Conservation Area and Upper Windmill Street, Gravesend Conservation Area. Gravesham Borough Council weighs each proposal against Gravesham Borough Council's adopted local plan and its householder design guidance, where the 5,810 homes here are 34% pre-1900, 13% 2000-2008, 12% 1900-1918, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 2000s building, over Victorian and earlier houses (34% of 5,810 homes), 2000s houses and apartments (13%) and Edwardian houses (12%).

Why a Town scheme is judged on Town terms

What is permitted in Town turns on designation first, so that is where we start: Harmer Street, Gravesend (conservation area designated in 1975), High Street & Queen Street, Gravesend (conservation area designated in 1975), King Street, Gravesend (conservation area designated in 1980), Milton Place, Gravesend (conservation area designated in 1990), Riverside, Gravesend (conservation area designated in 1980) and Upper Windmill Street, Gravesend (conservation area designated in 1980). Inside those boundaries permitted development is curtailed and Gravesham Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

No Article 4 direction is recorded for Gravesham Borough Council, but Town's 6 conservation areas still limit permitted development on those streets.

On stock, Town is Victorian and earlier houses (34% of 5,810 homes), 2000s houses and apartments (13%) and Edwardian houses (12%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 2000s building govern what a loft or rear projection can realistically be. Gravesham Borough Council decided 400 householder applications in the latest published year and granted 78%, with 72% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Town runs pre-1900 34% (1,960 homes), 1900-1918 12% (710 homes), 1919-1929 2% (90 homes), 1930-1939 2% (110 homes), 1945-1954 1% (30 homes), 1955-1964 6% (360 homes), 1965-1972 6% (320 homes), 1973-1982 8% (460 homes), 1983-1992 7% (430 homes), 1993-1999 3% (170 homes) and 2000-2008 13% (750 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Gravesham Borough Council also decides for Higham & Shorne, Meopham North, Meopham South & Vigo and Pelham, so a decision in Town sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Town by the published data

Published figures for Town and Gravesham Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureTown
Dwellings recorded5,810
Built pre-19001,960 (34%)
Built 1900-1918710 (12%)
Built 1919-192990 (2%)
Built 1930-1939110 (2%)
Built 1945-195430 (1%)
Built 1955-1964360 (6%)
Built 1965-1972320 (6%)
Built 1973-1982460 (8%)
Built 1983-1992430 (7%)
Built 1993-1999170 (3%)
Built 2000-2008750 (13%)
Built before 191946%
Built 1919–19393%
Built 1945–200843%
Conservation areas in Town6 (Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area…)
Conservation areas district-wide23
Article 4 directions recorded0
Householder applications decided400
Householder applications granted78%
Decided within 8 weeks72%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Gravesham Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Town planning application

Whatever you are building, Gravesham Borough Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Gravesham Borough Council assesses each proposal against Gravesham Borough Council's adopted local plan and its householder design guidance, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Town's stock, which runs to Victorian and earlier houses (34% of 5,810 homes), 2000s houses and apartments (13%) and Edwardian houses (12%), the same scheme is drawn differently to answer the concerns officers raise here. Town contains Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area, King Street, Gravesend Conservation Area conservation areas (Harmer Street, Gravesend Conservation Area designated 1975), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Harmer Street, Gravesend Conservation Area, High Street & Queen Street, Gravesend Conservation Area, King Street, Gravesend Conservation Area, Milton Place, Gravesend Conservation Area, Riverside, Gravesend Conservation Area and Upper Windmill Street, Gravesend Conservation Area among Town's — validation is stricter still, often demanding heritage detail and sometimes additional plans. No Article 4 direction is recorded for Gravesham Borough Council, but Town's 6 conservation areas still limit permitted development on those streets. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Town application

What drawings do I need for a planning application in Town?

Gravesham Borough Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Gravesham Borough Council requires one — larger schemes and most work in a conservation area

Town planning decisions — live from council data

Below is Gravesham Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Gravesham Borough Council granted 78% of its householder applications in the year to 31 March 2026, and Harmer Street, Gravesend Conservation Area shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

78%householder applications approved in Gravesham
87%national average — Gravesham is 9 points below the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Town applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Gravesham Borough Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Town applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 5,810 homes here are 34% pre-1900, 13% 2000-2008, 12% 1900-1918, which is what sets the realistic roof and rear-projection options. Across Harmer Street, Gravesend, High Street & Queen Street, Gravesend and King Street, Gravesend the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Town planning application

Applications we draw across Town

The application pack is the same discipline whatever the project. A few of the Town neighbourhoods and property types we prepare drawings for most often:

Harmer Street, Gravesend

Planning drawings for Harmer Street, Gravesend's conservation area designated in 1975 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

High Street & Queen Street, Gravesend

Planning drawings for High Street & Queen Street, Gravesend's conservation area designated in 1975 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

King Street, Gravesend

Planning drawings for King Street, Gravesend's conservation area designated in 1980 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

Milton Place, Gravesend

Planning drawings for Milton Place, Gravesend's conservation area designated in 1990 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

Riverside, Gravesend

Planning drawings for Riverside, Gravesend's conservation area designated in 1980 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

Upper Windmill Street, Gravesend

Planning drawings for Upper Windmill Street, Gravesend's conservation area designated in 1980 — scaled, validation-ready and drawn to Gravesham Borough Council's guidance.

Which application do I make in Town?

The route decides what Gravesham Borough Council needs and how long it takes. This is how the common Town routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Harmer Street, Gravesend Conservation Area and High Street & Queen Street, Gravesend Conservation Area, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Town application

A fixed process built around how Gravesham Borough Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Town postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Gravesham Borough Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Gravesham Borough Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Gravesham Borough Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Town?

Gravesham Borough Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Town address specifically.

Why do Town planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Gravesham Borough Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Town address specifically.

Can you submit the Town planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Gravesham Borough Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Town address specifically.

How long does Gravesham Borough Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Gravesham Borough Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Town address specifically.

Do I need planning drawings if my project is permitted development in Town?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Gravesham Borough Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Harmer Street, Gravesend Conservation Area and High Street & Queen Street, Gravesend Conservation Area, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Town address specifically.

How much do planning application drawings in Town cost?

We price each Town job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Gravesham Borough Council decides. The Gravesham Borough Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Gravesham

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Town