MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Patcham home — scaled plans and elevations ready for submission
Patcham · Planning Application Drawings & Submission

Planning application drawings in Patcham

The full drawing set for a Patcham application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Brighton & Hove City Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Patcham householder planning by the numbers

Brighton & Hove City Council granted 89% of the householder planning decisions it made in its latest published year — 2 points above the 87% England-wide householder average. The northern edges of Patcham and Withdean adjoin the South Downs National Park, where development on the open downland fringe is tightly restrained, which is where a policy-literate drawing pack earns its keep. Its dominant interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. Patcham carries at least one Article 4 direction, and conservation areas including Patcham and Tongdean remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Patcham is determined against an 8-week statutory target.

Old Patcham (the flint village core around All Saints church and the Black Lion), Ladies Mile (sweeping interwar semi-detached avenues on the downland slope), Tongdean (large detached 20th-century houses in a wooded conservation setting), Withdean (1930s semis and detached villas around the stadium and woods), Patcham Place (housing set against the Grade II* manor and its park) and Carden fringe (postwar suburban estates on the northern edge) — these are the Patcham pockets our drawings cover most. Heritage designations here include Patcham and Tongdean. Brighton & Hove City Council weighs each proposal against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, where the flint village core of Old Patcham and the wooded Tongdean estate are protected against alterations that would erode their established character. Pockets of larger houses around Withdean and Patcham have been converted into flats, which sit outside householder permitted-development rights.. On roofs the borough is hipped roofs on the interwar semis and bungalows and pitched clay-tiled roofs on the village cottages and larger villas, over interwar semi-detached houses and bungalows, the historic flint core of Old Patcham, large 20th-century detached houses at Tongdean and mock-Tudor and 1930s suburban villas.

What goes in a Patcham planning application

Whatever you are building, Brighton & Hove City Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Brighton & Hove City Council assesses each proposal against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Patcham's stock, which runs to interwar semi-detached houses and bungalows, the historic flint core of Old Patcham, large 20th-century detached houses at Tongdean and mock-Tudor and 1930s suburban villas, the same scheme is drawn differently to answer the concerns officers raise here. The northern edges of Patcham and Withdean adjoin the South Downs National Park, where development on the open downland fringe is tightly restrained, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Patcham and Tongdean among Patcham's — validation is stricter still, often demanding heritage detail and sometimes additional plans. Patcham is covered by the city-wide small-HMO Article 4 direction, while the Patcham conservation area — the historic downland village designated in 1970 — and the neighbouring Tongdean conservation area (designated 1989) protect their older cores from unrestricted alteration. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Patcham application

What drawings do I need for a planning application in Patcham?

Brighton & Hove City Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Brighton & Hove City Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Patcham operates several, which can change what is needed

Patcham planning decisions — live from council data

Below is Brighton & Hove City Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. The council grants a high share of householder applications, and across Patcham and Withdean the main pressures are the South Downs National Park fringe to the north and keeping roof alterations in step with the interwar streets. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

95%householder applications approved in Brighton and Hove
87%national average — Brighton and Hove is 8 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Patcham applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Brighton & Hove City Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Patcham applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The flint village core of Old Patcham and the wooded Tongdean estate are protected against alterations that would erode their established character. Across Old Patcham, Ladies Mile and Tongdean the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Patcham planning application

Applications we draw across Patcham

The application pack is the same discipline whatever the project. A few of the Patcham neighbourhoods and property types we prepare drawings for most often:

Old Patcham

Planning drawings for Old Patcham's the flint village core around All Saints church and the Black Lion — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Ladies Mile

Planning drawings for Ladies Mile's sweeping interwar semi-detached avenues on the downland slope — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Tongdean

Planning drawings for Tongdean's large detached 20th-century houses in a wooded conservation setting — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Withdean

Planning drawings for Withdean's 1930s semis and detached villas around the stadium and woods — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Patcham Place

Planning drawings for Patcham Place's housing set against the Grade II* manor and its park — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Carden fringe

Planning drawings for Carden fringe's postwar suburban estates on the northern edge — scaled, validation-ready and drawn to Brighton & Hove City Council's guidance.

Which application do I make in Patcham?

The route decides what Brighton & Hove City Council needs and how long it takes. This is how the common Patcham routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Patcham and Tongdean, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Patcham application

A fixed process built around how Brighton & Hove City Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Patcham postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Brighton & Hove City Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Brighton & Hove City Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Brighton & Hove City Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Patcham?

Brighton & Hove City Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Patcham address specifically.

Why do Patcham planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Brighton & Hove City Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Patcham address specifically.

Can you submit the Patcham planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Brighton & Hove City Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Patcham address specifically.

How long does Brighton & Hove City Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Brighton & Hove City Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Patcham address specifically.

Do I need planning drawings if my project is permitted development in Patcham?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Brighton & Hove City Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Patcham and Tongdean, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit.

How much do planning application drawings in Patcham cost?

We price each Patcham job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Brighton & Hove City Council decides. The Brighton & Hove City Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Brighton & Hove

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Patcham