MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Hartpury & Redmarley home — scaled plans and elevations ready for submission
Hartpury & Redmarley · Planning Application Drawings & Submission

Planning application drawings in Hartpury & Redmarley

The full drawing set for a Hartpury & Redmarley application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Forest of Dean District Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Hartpury & Redmarley planning decisions and design rules

Forest of Dean District Council granted 98% of the householder planning decisions it made in its latest published year — 11 points above the 87% England-wide householder average. Hartpury & Redmarley contains Lowbands Conservation Area, Redmarley Conservation Area, Staunton/Corse Conservation Area conservation areas (Lowbands Conservation Area designated 1977), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Hartpury & Redmarley carries at least one Article 4 direction, and conservation areas including Lowbands Conservation Area, Redmarley Conservation Area and Staunton/Corse Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Hartpury & Redmarley is determined against an 8-week statutory target.

Lowbands (conservation area designated in 1977), Redmarley (conservation area designated in 1990), Staunton/Corse (conservation area designated in 1977), Bromesberrow (civil parish within Hartpury & Redmarley), Corse (civil parish within Hartpury & Redmarley), Hartpury (civil parish within Hartpury & Redmarley), Pauntley (civil parish within Hartpury & Redmarley), Redmarley D'Abitot (civil parish within Hartpury & Redmarley) and Rudford and Highleadon (civil parish within Hartpury & Redmarley) — these are the Hartpury & Redmarley pockets our drawings cover most. Heritage designations here include Lowbands Conservation Area, Redmarley Conservation Area and Staunton/Corse Conservation Area. Forest of Dean District Council weighs each proposal against Forest of Dean District Council's development plan and the design policies it applies to householder applications, where the 1,650 homes here are 35% pre-1900, 8% 1955-1964, 8% 1973-1982, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow gabled roofs typical of that period's building, over Victorian and earlier houses (35% of 1,650 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (8%).

Why a Hartpury & Redmarley scheme is judged on Hartpury & Redmarley terms

What is permitted in Hartpury & Redmarley turns on designation first, so that is where we start: Lowbands (conservation area designated in 1977), Redmarley (conservation area designated in 1990) and Staunton/Corse (conservation area designated in 1977). Inside those boundaries permitted development is curtailed and Forest of Dean District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Hartpury & Redmarley takes in Bromesberrow, Corse, Hartpury, Pauntley, Redmarley D'Abitot and Rudford and Highleadon. Forest of Dean District Council has 2 recorded Article 4 directions — check the address before assuming PD applies in Hartpury & Redmarley.

On stock, Hartpury & Redmarley is Victorian and earlier houses (35% of 1,650 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (8%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. Forest of Dean District Council decided 277 householder applications in the latest published year and granted 98%, with 64% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Hartpury & Redmarley runs pre-1900 35% (580 homes), 1900-1918 1% (20 homes), 1919-1929 1% (20 homes), 1930-1939 3% (50 homes), 1945-1954 6% (100 homes), 1955-1964 8% (130 homes), 1965-1972 4% (70 homes), 1973-1982 8% (130 homes), 1983-1992 5% (90 homes), 1993-1999 5% (90 homes) and 2000-2008 6% (100 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Forest of Dean District Council also decides for Berry Hill, Dymock, Longhope & Huntley, Newent & Taynton, Newnham, Pillowell and St. Briavels, so a decision in Hartpury & Redmarley sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include English Bicknor (land at Redhouse Lane, Murrells Road and Smithy Close) and Newnham (within conservation area). Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Hartpury & Redmarley by the published data

Published figures for Hartpury & Redmarley and Forest of Dean District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureHartpury & Redmarley
Dwellings recorded1,650
Built pre-1900580 (35%)
Built 1900-191820 (1%)
Built 1919-192920 (1%)
Built 1930-193950 (3%)
Built 1945-1954100 (6%)
Built 1955-1964130 (8%)
Built 1965-197270 (4%)
Built 1973-1982130 (8%)
Built 1983-199290 (5%)
Built 1993-199990 (5%)
Built 2000-2008100 (6%)
Built before 191936%
Built 1919–19394%
Built 1945–200843%
Conservation areas in Hartpury & Redmarley3 (Lowbands Conservation Area, Redmarley Conservation Area…)
Conservation areas district-wide27
Article 4 directions recorded2
Householder applications decided277
Householder applications granted98%
Decided within 8 weeks64%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Forest of Dean District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Hartpury & Redmarley planning application

Whatever you are building, Forest of Dean District Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Forest of Dean District Council assesses each proposal against Forest of Dean District Council's development plan and the design policies it applies to householder applications, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Hartpury & Redmarley's stock, which runs to Victorian and earlier houses (35% of 1,650 homes), late-1950s and early-1960s houses (8%) and 1970s and early-1980s houses (8%), the same scheme is drawn differently to answer the concerns officers raise here. Hartpury & Redmarley contains Lowbands Conservation Area, Redmarley Conservation Area, Staunton/Corse Conservation Area conservation areas (Lowbands Conservation Area designated 1977), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Lowbands Conservation Area, Redmarley Conservation Area and Staunton/Corse Conservation Area among Hartpury & Redmarley's — validation is stricter still, often demanding heritage detail and sometimes additional plans. Forest of Dean District Council has 2 recorded Article 4 directions — check the address before assuming PD applies in Hartpury & Redmarley. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Hartpury & Redmarley application

What drawings do I need for a planning application in Hartpury & Redmarley?

Forest of Dean District Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Forest of Dean District Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Hartpury & Redmarley operates several, which can change what is needed

Hartpury & Redmarley planning decisions — live from council data

Below is Forest of Dean District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Forest of Dean District Council granted 98% of its householder applications in the year to 31 March 2026, and Lowbands Conservation Area shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

98%householder applications approved in Forest of Dean
87%national average — Forest of Dean is 11 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Hartpury & Redmarley applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Forest of Dean District Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Hartpury & Redmarley applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 1,650 homes here are 35% pre-1900, 8% 1955-1964, 8% 1973-1982, which is what sets the realistic roof and rear-projection options. Across Lowbands, Redmarley and Staunton/Corse the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Hartpury & Redmarley planning application

Applications we draw across Hartpury & Redmarley

The application pack is the same discipline whatever the project. A few of the Hartpury & Redmarley neighbourhoods and property types we prepare drawings for most often:

Lowbands

Planning drawings for Lowbands's conservation area designated in 1977 — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Redmarley

Planning drawings for Redmarley's conservation area designated in 1990 — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Staunton/Corse

Planning drawings for Staunton/Corse's conservation area designated in 1977 — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Bromesberrow

Planning drawings for Bromesberrow's civil parish within Hartpury & Redmarley — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Corse

Planning drawings for Corse's civil parish within Hartpury & Redmarley — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Hartpury

Planning drawings for Hartpury's civil parish within Hartpury & Redmarley — scaled, validation-ready and drawn to Forest of Dean District Council's guidance.

Which application do I make in Hartpury & Redmarley?

The route decides what Forest of Dean District Council needs and how long it takes. This is how the common Hartpury & Redmarley routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Lowbands Conservation Area and Redmarley Conservation Area, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Hartpury & Redmarley application

A fixed process built around how Forest of Dean District Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Hartpury & Redmarley postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Forest of Dean District Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Forest of Dean District Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Forest of Dean District Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Hartpury & Redmarley?

Forest of Dean District Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Hartpury & Redmarley address specifically.

Why do Hartpury & Redmarley planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Forest of Dean District Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Hartpury & Redmarley address specifically.

Can you submit the Hartpury & Redmarley planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Forest of Dean District Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Hartpury & Redmarley address specifically.

How long does Forest of Dean District Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Forest of Dean District Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Hartpury & Redmarley address specifically.

Do I need planning drawings if my project is permitted development in Hartpury & Redmarley?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Forest of Dean District Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Lowbands Conservation Area and Redmarley Conservation Area, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Hartpury & Redmarley address specifically.

How much do planning application drawings in Hartpury & Redmarley cost?

We price each Hartpury & Redmarley job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Forest of Dean District Council decides. The Forest of Dean District Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Forest of Dean

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Hartpury & Redmarley