MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Christchurch Town home — scaled plans and elevations ready for submission
Christchurch Town · Planning Application Drawings & Submission

Planning application drawings in Christchurch Town

The full drawing set for a Christchurch Town application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Bournemouth, Christchurch and Poole Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Christchurch Town planning decisions and design rules

Bournemouth, Christchurch and Poole Council granted 88% of the householder planning decisions it made in its latest published year — 1 point above the 87% England-wide householder average. Christchurch Town contains Avon Buildings, Christchurch Central, Purewell conservation areas (Avon Buildings designated 1991), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Avon Buildings, Christchurch Central and Purewell those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Christchurch Town is determined against an 8-week statutory target.

Avon Buildings (conservation area designated in 1991), Christchurch Central (designated conservation area), Purewell (conservation area designated in 1991) and Christchurch (civil parish within Christchurch Town) — these are the Christchurch Town pockets our drawings cover most. Heritage designations here include Avon Buildings, Christchurch Central and Purewell. Bournemouth, Christchurch and Poole Council weighs each proposal against the adopted Bournemouth, Christchurch and Poole local plan and Bournemouth, Christchurch and Poole Council's design guidance for householder work, where the 5,280 homes here are 16% 1983-1992, 14% 1993-1999, 12% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 1980s building and trussed-rafter roofs typical of 1990s building, over 1980s estate houses (16% of 5,280 homes), 1990s estate houses (14%) and Victorian and earlier houses (12%).

Why a Christchurch Town scheme is judged on Christchurch Town terms

What is permitted in Christchurch Town turns on designation first, so that is where we start: Avon Buildings (conservation area designated in 1991), Christchurch Central (designated conservation area) and Purewell (conservation area designated in 1991). Inside those boundaries permitted development is curtailed and Bournemouth, Christchurch and Poole Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Christchurch Town takes in Christchurch. No Article 4 direction is recorded for Bournemouth, Christchurch and Poole Council, but Christchurch Town's 3 conservation areas still limit permitted development on those streets.

On stock, Christchurch Town is 1980s estate houses (16% of 5,280 homes), 1990s estate houses (14%) and Victorian and earlier houses (12%) — which is why trussed-rafter roofs typical of 1980s building and trussed-rafter roofs typical of 1990s building govern what a loft or rear projection can realistically be. Bournemouth, Christchurch and Poole Council decided 1,206 householder applications in the latest published year and granted 88%, with 44% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Christchurch Town runs pre-1900 12% (620 homes), 1900-1918 6% (340 homes), 1919-1929 4% (210 homes), 1930-1939 11% (570 homes), 1945-1954 2% (120 homes), 1955-1964 5% (270 homes), 1965-1972 5% (280 homes), 1973-1982 8% (420 homes), 1983-1992 16% (870 homes), 1993-1999 14% (760 homes) and 2000-2008 7% (370 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Bournemouth, Christchurch and Poole Council also decides for Bearwood & Merley, Boscombe West, Bournemouth Central, Broadstone, Burton & Grange, Canford Cliffs, Commons and Highcliffe & Walkford, so a decision in Christchurch Town sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Christchurch Town by the published data

Published figures for Christchurch Town and Bournemouth, Christchurch and Poole Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureChristchurch Town
Dwellings recorded5,280
Built pre-1900620 (12%)
Built 1900-1918340 (6%)
Built 1919-1929210 (4%)
Built 1930-1939570 (11%)
Built 1945-1954120 (2%)
Built 1955-1964270 (5%)
Built 1965-1972280 (5%)
Built 1973-1982420 (8%)
Built 1983-1992870 (16%)
Built 1993-1999760 (14%)
Built 2000-2008370 (7%)
Built before 191918%
Built 1919–193915%
Built 1945–200859%
Conservation areas in Christchurch Town3 (Avon Buildings, Christchurch Central…)
Conservation areas district-wide48
Article 4 directions recorded0
Householder applications decided1,206
Householder applications granted88%
Decided within 8 weeks44%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Bournemouth, Christchurch and Poole Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Christchurch Town planning application

Whatever you are building, Bournemouth, Christchurch and Poole Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Bournemouth, Christchurch and Poole Council assesses each proposal against the adopted Bournemouth, Christchurch and Poole local plan and Bournemouth, Christchurch and Poole Council's design guidance for householder work, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Christchurch Town's stock, which runs to 1980s estate houses (16% of 5,280 homes), 1990s estate houses (14%) and Victorian and earlier houses (12%), the same scheme is drawn differently to answer the concerns officers raise here. Christchurch Town contains Avon Buildings, Christchurch Central, Purewell conservation areas (Avon Buildings designated 1991), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Avon Buildings, Christchurch Central and Purewell among Christchurch Town's — validation is stricter still, often demanding heritage detail and sometimes additional plans. No Article 4 direction is recorded for Bournemouth, Christchurch and Poole Council, but Christchurch Town's 3 conservation areas still limit permitted development on those streets. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Christchurch Town application

What drawings do I need for a planning application in Christchurch Town?

Bournemouth, Christchurch and Poole Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Bournemouth, Christchurch and Poole Council requires one — larger schemes and most work in a conservation area

Christchurch Town planning decisions — live from council data

Below is Bournemouth, Christchurch and Poole Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Bournemouth, Christchurch and Poole Council granted 88% of its householder applications in the year to 31 March 2026, and Avon Buildings shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

88%householder applications approved in Bournemouth, Christchurch and Poole
87%national average — Bournemouth, Christchurch and Poole is 1 point above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Christchurch Town applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Bournemouth, Christchurch and Poole Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Christchurch Town applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 5,280 homes here are 16% 1983-1992, 14% 1993-1999, 12% pre-1900, which is what sets the realistic roof and rear-projection options. Across Avon Buildings, Christchurch Central and Purewell the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Christchurch Town planning application

Applications we draw across Christchurch Town

The application pack is the same discipline whatever the project. A few of the Christchurch Town neighbourhoods and property types we prepare drawings for most often:

Avon Buildings

Planning drawings for Avon Buildings's conservation area designated in 1991 — scaled, validation-ready and drawn to Bournemouth, Christchurch and Poole Council's guidance.

Christchurch Central

Planning drawings for Christchurch Central's designated conservation area — scaled, validation-ready and drawn to Bournemouth, Christchurch and Poole Council's guidance.

Purewell

Planning drawings for Purewell's conservation area designated in 1991 — scaled, validation-ready and drawn to Bournemouth, Christchurch and Poole Council's guidance.

Christchurch

Planning drawings for Christchurch's civil parish within Christchurch Town — scaled, validation-ready and drawn to Bournemouth, Christchurch and Poole Council's guidance.

Which application do I make in Christchurch Town?

The route decides what Bournemouth, Christchurch and Poole Council needs and how long it takes. This is how the common Christchurch Town routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Avon Buildings and Christchurch Central, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Christchurch Town application

A fixed process built around how Bournemouth, Christchurch and Poole Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Christchurch Town postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Bournemouth, Christchurch and Poole Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Bournemouth, Christchurch and Poole Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Bournemouth, Christchurch and Poole Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Christchurch Town?

Bournemouth, Christchurch and Poole Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Christchurch Town address specifically.

Why do Christchurch Town planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Bournemouth, Christchurch and Poole Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Christchurch Town address specifically.

Can you submit the Christchurch Town planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Bournemouth, Christchurch and Poole Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Christchurch Town address specifically.

How long does Bournemouth, Christchurch and Poole Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Bournemouth, Christchurch and Poole Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Christchurch Town address specifically.

Do I need planning drawings if my project is permitted development in Christchurch Town?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Bournemouth, Christchurch and Poole Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Avon Buildings and Christchurch Central, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Christchurch Town address specifically.

How much do planning application drawings in Christchurch Town cost?

We price each Christchurch Town job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Bournemouth, Christchurch and Poole Council decides. The Bournemouth, Christchurch and Poole Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Bournemouth, Christchurch and Poole

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Christchurch Town