MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Central Bedfordshire home — scaled plans and elevations ready for submission
Central Bedfordshire · Planning Application Drawings & Submission

Planning application drawings in Central Bedfordshire

The full drawing set for a Central Bedfordshire application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Central Bedfordshire Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Central Bedfordshire planning decisions and design rules

Central Bedfordshire Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Central Bedfordshire contains Ampthill Conservation Area, Aspley Guise Conservation Area, Aspley Heath Conservation Area conservation areas, so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Central Bedfordshire carries at least one Article 4 direction, and conservation areas including Ampthill Conservation Area, Aspley Guise Conservation Area and Aspley Heath Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Central Bedfordshire is determined against an 8-week statutory target.

Ampthill (designated conservation area), Aspley Guise (designated conservation area), Aspley Heath (designated conservation area), Astwick (designated conservation area), Biggleswade (designated conservation area), Billington (designated conservation area), Blunham (designated conservation area), Caddington (designated conservation area), Ampthill (ward of Central Bedfordshire), Aspley & Woburn (ward of Central Bedfordshire), Biggleswade West (ward of Central Bedfordshire), Caddington (ward of Central Bedfordshire), Dunstable East (ward of Central Bedfordshire), Eaton Bray (ward of Central Bedfordshire), Flitwick (ward of Central Bedfordshire) and Heath & Reach (ward of Central Bedfordshire) — these are the Central Bedfordshire pockets our drawings cover most. Heritage designations here include Ampthill Conservation Area, Aspley Guise Conservation Area, Aspley Heath Conservation Area, Astwick Conservation Area, Biggleswade Conservation Area, Billington Conservation Area, Blunham Conservation Area and Caddington Conservation Area. Central Bedfordshire Council weighs each proposal against the adopted Central Bedfordshire local plan and Central Bedfordshire Council's design guidance for householder work, where the 70,210 homes here are 11% 1973-1982, 9% 1955-1964, 7% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow trussed roofs typical of 1970s building and shallow gabled roofs typical of that period's building, over 1970s and early-1980s houses (11% of 70,210 homes), late-1950s and early-1960s houses (9%) and late-1960s and early-1970s houses (7%).

Why a Central Bedfordshire scheme is judged on Central Bedfordshire terms

What is permitted in Central Bedfordshire turns on designation first, so that is where we start: Ampthill (designated conservation area), Aspley Guise (designated conservation area), Aspley Heath (designated conservation area), Astwick (designated conservation area), Biggleswade (designated conservation area), Billington (designated conservation area), Blunham (designated conservation area) and Caddington (designated conservation area). Inside those boundaries permitted development is curtailed and Central Bedfordshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Central Bedfordshire takes in Ampthill, Aspley & Woburn, Biggleswade West, Caddington, Dunstable East, Eaton Bray, Flitwick and Heath & Reach. Central Bedfordshire Council has 7 recorded Article 4 directions — check the address before assuming PD applies in the district.

On stock, Central Bedfordshire is 1970s and early-1980s houses (11% of 70,210 homes), late-1950s and early-1960s houses (9%) and late-1960s and early-1970s houses (7%) — which is why shallow trussed roofs typical of 1970s building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. Central Bedfordshire Council decided 844 householder applications in the latest published year and granted 91%, with 76% issued inside the eight-week target. We draw to that record rather than to a national average.

The full build-period split for Central Bedfordshire runs pre-1900 3% (190 homes), 1900-1918 0% (30 homes), 1919-1929 0% (10 homes), 1930-1939 6% (350 homes), 1945-1954 3% (170 homes), 1955-1964 30% (1,850 homes), 1965-1972 33% (1,990 homes), 1973-1982 4% (260 homes), 1983-1992 5% (310 homes), 1993-1999 4% (220 homes) and 2000-2008 3% (170 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Central Bedfordshire Council also decides for Ampthill, Aspley & Woburn, Biggleswade West, Caddington, Dunstable East, Eaton Bray, Flitwick and Heath & Reach, so a decision in Central Bedfordshire sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Article 4 Direction, Fairfield Parish, Land at Lower Sundon and Land south west of Westfield Farm, Hitchin Road, Henlow Camp, Bedfordshire. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

Central Bedfordshire by the published data

Published figures for Central Bedfordshire and Central Bedfordshire Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureCentral Bedfordshire
Dwellings recorded70,210
Built pre-1900190 (3%)
Built 1900-191830 (0%)
Built 1919-192910 (0%)
Built 1930-1939350 (6%)
Built 1945-1954170 (3%)
Built 1955-19641,850 (30%)
Built 1965-19721,990 (33%)
Built 1973-1982260 (4%)
Built 1983-1992310 (5%)
Built 1993-1999220 (4%)
Built 2000-2008170 (3%)
Built before 191913%
Built 1919–19397%
Built 1945–200864%
Conservation areas in Central Bedfordshire8 (Ampthill Conservation Area, Aspley Guise Conservation Area…)
Conservation areas district-wide61
Article 4 directions recorded7
Householder applications decided844
Householder applications granted91%
Decided within 8 weeks76%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Central Bedfordshire Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Central Bedfordshire planning application

Whatever you are building, Central Bedfordshire Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. Central Bedfordshire Council assesses each proposal against the adopted Central Bedfordshire local plan and Central Bedfordshire Council's design guidance for householder work, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Central Bedfordshire's stock, which runs to 1970s and early-1980s houses (11% of 70,210 homes), late-1950s and early-1960s houses (9%) and late-1960s and early-1970s houses (7%), the same scheme is drawn differently to answer the concerns officers raise here. Central Bedfordshire contains Ampthill Conservation Area, Aspley Guise Conservation Area, Aspley Heath Conservation Area conservation areas, so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Ampthill Conservation Area, Aspley Guise Conservation Area, Aspley Heath Conservation Area, Astwick Conservation Area, Biggleswade Conservation Area, Billington Conservation Area, Blunham Conservation Area and Caddington Conservation Area among Central Bedfordshire's — validation is stricter still, often demanding heritage detail and sometimes additional plans. Central Bedfordshire Council has 7 recorded Article 4 directions — check the address before assuming PD applies in the district. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Central Bedfordshire application

What drawings do I need for a planning application in Central Bedfordshire?

Central Bedfordshire Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where Central Bedfordshire Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Central Bedfordshire operates several, which can change what is needed

Central Bedfordshire planning decisions — live from council data

Below is Central Bedfordshire Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Central Bedfordshire Council granted 91% of 844 householder decisions in the year to 31 March 2026, 76% of them inside eight weeks. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

91%householder applications approved in Central Bedfordshire
87%national average — Central Bedfordshire is 4 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Central Bedfordshire applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Central Bedfordshire Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Central Bedfordshire applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 70,210 homes here are 11% 1973-1982, 9% 1955-1964, 7% 1965-1972, which is what sets the realistic roof and rear-projection options. Across Ampthill, Aspley Guise and Aspley Heath the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Central Bedfordshire planning application

Applications we draw across Central Bedfordshire

The application pack is the same discipline whatever the project. A few of the Central Bedfordshire neighbourhoods and property types we prepare drawings for most often:

Ampthill

Planning drawings for Ampthill's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Aspley Guise

Planning drawings for Aspley Guise's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Aspley Heath

Planning drawings for Aspley Heath's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Astwick

Planning drawings for Astwick's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Biggleswade

Planning drawings for Biggleswade's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Billington

Planning drawings for Billington's designated conservation area — scaled, validation-ready and drawn to Central Bedfordshire Council's guidance.

Which application do I make in Central Bedfordshire?

The route decides what Central Bedfordshire Council needs and how long it takes. This is how the common Central Bedfordshire routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Ampthill Conservation Area and Aspley Guise Conservation Area, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Central Bedfordshire application

A fixed process built around how Central Bedfordshire Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Central Bedfordshire postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Central Bedfordshire Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Central Bedfordshire Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Central Bedfordshire Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Central Bedfordshire?

Central Bedfordshire Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed.

Why do Central Bedfordshire planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Central Bedfordshire Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return.

Can you submit the Central Bedfordshire planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Central Bedfordshire Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself.

How long does Central Bedfordshire Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Central Bedfordshire Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes.

Do I need planning drawings if my project is permitted development in Central Bedfordshire?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Central Bedfordshire Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Ampthill Conservation Area and Aspley Guise Conservation Area, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit.

How much do planning application drawings in Central Bedfordshire cost?

We price each Central Bedfordshire job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Central Bedfordshire Council decides. The Central Bedfordshire Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across Central Bedfordshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Central Bedfordshire