The full drawing set for a Castle application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to Tamworth Borough Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.
Tamworth Borough Council granted 99% of the householder planning decisions it made in its latest published year — 12 points above the 87% England-wide householder average. Castle contains Tamworth, Town Centre, Tamworth, Victoria Road and Albert Road conservation areas (Tamworth, Town Centre designated 1976), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Castle is determined against an 8-week statutory target.
Tamworth, Town Centre (conservation area designated in 1976) and Tamworth, Victoria Road and Albert Road (conservation area designated in 1994) — these are the Castle pockets our drawings cover most. Heritage designations here include Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road. Tamworth Borough Council weighs each proposal against Tamworth Borough Council's adopted local plan and its householder design guidance, where the 4,430 homes here are 28% 1993-1999, 14% pre-1900, 11% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 1990s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over 1990s estate houses (28% of 4,430 homes), Victorian and earlier houses (14%) and late-1960s and early-1970s houses (11%).
What is permitted in Castle turns on designation first, so that is where we start: Tamworth, Town Centre (conservation area designated in 1976) and Tamworth, Victoria Road and Albert Road (conservation area designated in 1994). Inside those boundaries permitted development is curtailed and Tamworth Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
No Article 4 direction is recorded for Tamworth Borough Council, but Castle's 2 conservation areas still limit permitted development on those streets.
On stock, Castle is 1990s estate houses (28% of 4,430 homes), Victorian and earlier houses (14%) and late-1960s and early-1970s houses (11%) — which is why trussed-rafter roofs typical of 1990s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Tamworth Borough Council decided 91 householder applications in the latest published year and granted 99%, with 53% issued inside the eight-week target. We draw to that record rather than to a national average.
The full build-period split for Castle runs pre-1900 14% (600 homes), 1900-1918 2% (90 homes), 1919-1929 1% (50 homes), 1930-1939 0% (10 homes), 1945-1954 6% (250 homes), 1955-1964 3% (140 homes), 1965-1972 11% (500 homes), 1973-1982 2% (80 homes), 1983-1992 7% (300 homes), 1993-1999 28% (1,220 homes) and 2000-2008 6% (280 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Tamworth Borough Council also decides for Spital, so a decision in Castle sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Castle and Tamworth Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Castle |
|---|---|
| Dwellings recorded | 4,430 |
| Built pre-1900 | 600 (14%) |
| Built 1900-1918 | 90 (2%) |
| Built 1919-1929 | 50 (1%) |
| Built 1930-1939 | 10 (0%) |
| Built 1945-1954 | 250 (6%) |
| Built 1955-1964 | 140 (3%) |
| Built 1965-1972 | 500 (11%) |
| Built 1973-1982 | 80 (2%) |
| Built 1983-1992 | 300 (7%) |
| Built 1993-1999 | 1,220 (28%) |
| Built 2000-2008 | 280 (6%) |
| Built before 1919 | 16% |
| Built 1919–1939 | 1% |
| Built 1945–2008 | 63% |
| Conservation areas in Castle | 2 (Tamworth, Town Centre, Tamworth, Victoria Road and Albert Road) |
| Conservation areas district-wide | 7 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 91 |
| Householder applications granted | 99% |
| Decided within 8 weeks | 53% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Tamworth Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Whatever you are building, Tamworth Borough Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.
The drawings are also the argument. Tamworth Borough Council assesses each proposal against Tamworth Borough Council's adopted local plan and its householder design guidance, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Castle's stock, which runs to 1990s estate houses (28% of 4,430 homes), Victorian and earlier houses (14%) and late-1960s and early-1970s houses (11%), the same scheme is drawn differently to answer the concerns officers raise here. Castle contains Tamworth, Town Centre, Tamworth, Victoria Road and Albert Road conservation areas (Tamworth, Town Centre designated 1976), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.
Where the property sits in a conservation area — Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road among Castle's — validation is stricter still, often demanding heritage detail and sometimes additional plans. No Article 4 direction is recorded for Tamworth Borough Council, but Castle's 2 conservation areas still limit permitted development on those streets. We confirm the designation before drawing so the pack meets the higher bar first time.
Tamworth Borough Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:
We draw the complete set — location and block plans, existing and proposed plans, elevations and any section — to Tamworth Borough Council's checklist, then lodge it on the Planning Portal, manage validation and answer case-officer queries so the application is decided on its merits, not bounced on a technicality.
Below is Tamworth Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Tamworth Borough Council granted 99% of its householder applications in the year to 31 March 2026, and Tamworth, Town Centre shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — Tamworth Borough Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Castle applications lose weeks. We draw to the checklist so this never happens.
Second is the planning judgement itself, once the pack is valid. The 4,430 homes here are 28% 1993-1999, 14% pre-1900, 11% 1965-1972, which is what sets the realistic roof and rear-projection options. Across Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.
The application pack is the same discipline whatever the project. A few of the Castle neighbourhoods and property types we prepare drawings for most often:
Planning drawings for Tamworth, Town Centre's conservation area designated in 1976 — scaled, validation-ready and drawn to Tamworth Borough Council's guidance.
Planning drawings for Tamworth, Victoria Road and Albert Road's conservation area designated in 1994 — scaled, validation-ready and drawn to Tamworth Borough Council's guidance.
The route decides what Tamworth Borough Council needs and how long it takes. This is how the common Castle routes compare.
| Route | When it applies | Core drawings | Typical decision |
|---|---|---|---|
| Householder application | Extensions and alterations to a single house | Location, block, existing & proposed plans and elevations | About 8 weeks |
| Full application | Flats, new units, changes of use | As householder plus site plan and often a section | 8–13 weeks |
| Lawful development certificate | Confirming a scheme is permitted development | Existing & proposed plans and elevations to prove PD limits | About 8 weeks |
| Prior approval | Larger single-storey rear extensions | Plans and elevations plus neighbour notification | About 6 weeks |
In a conservation area such as Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.
A fixed process built around how Tamworth Borough Council validates and decides — most drawing sets are submission-ready within seven days of survey.
Send us your Castle postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live Tamworth Borough Council decisions.
We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.
Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to Tamworth Borough Council's checklist.
We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until Tamworth Borough Council issues its decision.
Tamworth Borough Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Castle address specifically.
Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. Tamworth Borough Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Castle address specifically.
Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the Tamworth Borough Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Castle address specifically.
A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to Tamworth Borough Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Castle address specifically.
You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from Tamworth Borough Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Tamworth, Town Centre and Tamworth, Victoria Road and Albert Road, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Castle address specifically.
We price each Castle job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until Tamworth Borough Council decides. The Tamworth Borough Council application fee is separate and paid to the council. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.