MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Planning application drawings for a Alton Holybourne home — scaled plans and elevations ready for submission
Alton Holybourne · Planning Application Drawings & Submission

Planning application drawings in Alton Holybourne

The full drawing set for a Alton Holybourne application — location and block plans, existing and proposed floor plans, elevations and sections, drawn to East Hampshire District Council's validation checklist so the pack is accepted first time, delivered in days and revised free until your decision, with a free approval-odds check first.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

What the data says about planning in Alton Holybourne

East Hampshire District Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Alton Holybourne contains Anstey (Alton), Holybourne conservation areas (Anstey (Alton) designated 1995), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.

Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which East Hampshire District Council needs a full application. Alton Holybourne carries at least one Article 4 direction, and conservation areas including Anstey (Alton) and Holybourne remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Alton Holybourne is determined against an 8-week statutory target.

Anstey (Alton) (conservation area designated in 1995), Holybourne (conservation area designated in 1977) and Alton (civil parish within Alton Holybourne) — these are the Alton Holybourne pockets our drawings cover most. Heritage designations here include Anstey (Alton) and Holybourne. East Hampshire District Council weighs each proposal against the adopted East Hampshire local plan and East Hampshire District Council's design guidance for householder work, where the 870 homes here are 17% 1973-1982, 11% pre-1900, 11% 1983-1992, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow trussed roofs typical of 1970s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over 1970s and early-1980s houses (17% of 870 homes), Victorian and earlier houses (11%) and 1980s estate houses (11%).

Designations, stock and decisions in Alton Holybourne

Heritage designation is the single biggest variable in Alton Holybourne, and it is address-specific: Anstey (Alton) (conservation area designated in 1995) and Holybourne (conservation area designated in 1977). Inside those boundaries permitted development is curtailed and East Hampshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Alton Holybourne takes in Alton. East Hampshire District Council has 50 recorded Article 4 directions — check the address before assuming PD applies in Alton Holybourne.

On stock, Alton Holybourne is 1970s and early-1980s houses (17% of 870 homes), Victorian and earlier houses (11%) and 1980s estate houses (11%) — which is why shallow trussed roofs typical of 1970s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. East Hampshire District Council decided 327 householder applications in the latest published year and granted 91%, with 24% issued inside the eight-week target. We work from the council's own published record.

The full build-period split for Alton Holybourne runs pre-1900 11% (100 homes), 1900-1918 5% (40 homes), 1919-1929 3% (30 homes), 1930-1939 1% (10 homes), 1945-1954 1% (10 homes), 1955-1964 3% (30 homes), 1965-1972 7% (60 homes), 1973-1982 17% (150 homes), 1983-1992 11% (100 homes), 1993-1999 3% (30 homes) and 2000-2008 6% (50 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

East Hampshire District Council also decides for Alton Whitedown, Bentworth & Froyle, Bramshott & Liphook, Buriton & East Meon, Four Marks & Medstead, Headley, Horndean Catherington and Liss, so a decision in Alton Holybourne sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include Ajax House/Plowden House, Liphook, Bedford Road, Petersfield, Bellhanger Enterprises, Bentworth and Bentley Business Park, Bentley. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

The published numbers behind a Alton Holybourne application

Published figures for Alton Holybourne and East Hampshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureAlton Holybourne
Dwellings recorded870
Built pre-1900100 (11%)
Built 1900-191840 (5%)
Built 1919-192930 (3%)
Built 1930-193910 (1%)
Built 1945-195410 (1%)
Built 1955-196430 (3%)
Built 1965-197260 (7%)
Built 1973-1982150 (17%)
Built 1983-1992100 (11%)
Built 1993-199930 (3%)
Built 2000-200850 (6%)
Built before 191916%
Built 1919–19395%
Built 1945–200849%
Conservation areas in Alton Holybourne2 (Anstey (Alton), Holybourne)
Conservation areas district-wide50
Article 4 directions recorded50
Householder applications decided327
Householder applications granted91%
Decided within 8 weeks24%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are East Hampshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What goes in a Alton Holybourne planning application

Whatever you are building, East Hampshire District Council decides it from the same core set. A location plan at 1:1250 fixes the site on the map with the red-line boundary; a block plan at 1:500 shows the property in its plot; then existing and proposed floor plans and elevations at 1:100 or 1:50 show the house as it is and as it will be. Larger schemes add a section and, where policy requires, a design and access statement. Miss one and the application is returned invalid before an officer has looked at it.

The drawings are also the argument. East Hampshire District Council assesses each proposal against the adopted East Hampshire local plan and East Hampshire District Council's design guidance for householder work, and the elevations are where the case is won or lost — ridge and eaves heights, window positions, materials and how the change reads from the street. On Alton Holybourne's stock, which runs to 1970s and early-1980s houses (17% of 870 homes), Victorian and earlier houses (11%) and 1980s estate houses (11%), the same scheme is drawn differently to answer the concerns officers raise here. Alton Holybourne contains Anstey (Alton), Holybourne conservation areas (Anstey (Alton) designated 1995), so materials, fenestration and roof form are assessed against the appraisal, so the pack is built to pre-empt exactly that.

Where the property sits in a conservation area — Anstey (Alton) and Holybourne among Alton Holybourne's — validation is stricter still, often demanding heritage detail and sometimes additional plans. East Hampshire District Council has 50 recorded Article 4 directions — check the address before assuming PD applies in Alton Holybourne. We confirm the designation before drawing so the pack meets the higher bar first time.

Planning drawing package prepared for a Alton Holybourne application

What drawings do I need for a planning application in Alton Holybourne?

East Hampshire District Council validates against a published checklist before it assesses anything. A typical householder application needs each of these, correctly scaled and labelled:

  • A location plan at 1:1250 with the application site edged in red and any other land you control edged in blue
  • A block or site plan at 1:500 showing the property, its boundaries and the position of the works
  • Existing floor plans and elevations at 1:100 or 1:50, showing the house before any change
  • Proposed floor plans and elevations at the same scale, with a scale bar and north point
  • A design and access statement where East Hampshire District Council requires one — larger schemes and most work in a conservation area
  • Confirmation of any Article 4 direction on the street — Alton Holybourne operates several, which can change what is needed

Alton Holybourne planning decisions — live from council data

Below is East Hampshire District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. East Hampshire District Council granted 91% of its householder applications in the year to 31 March 2026, and Anstey (Alton) shapes what is approved here. A complete, correctly scaled pack that answers those concerns on the elevations is validated faster and refused less often than one that leaves them for the officer to raise.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

91%householder applications approved in East Hampshire
87%national average — East Hampshire is 4 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

Why Alton Holybourne applications get returned or refused

Two different things sink an application, and they happen at two different stages. First is validation: a missing block plan, an unscaled elevation, no red line, no north point — East Hampshire District Council returns the whole submission and the clock never starts. Getting the pack right at this stage is purely mechanical, and it is where a lot of self-submitted Alton Holybourne applications lose weeks. We draw to the checklist so this never happens.

Second is the planning judgement itself, once the pack is valid. The 870 homes here are 17% 1973-1982, 11% pre-1900, 11% 1983-1992, which is what sets the realistic roof and rear-projection options. Across Anstey (Alton), Holybourne and Alton the recurring refusals are about scale, overlooking and how the proposal sits against its neighbours — all of which are settled on the drawings. We draw the scheme to answer them before submission rather than after a refusal.

Scaled architect drawings for a Alton Holybourne planning application

Applications we draw across Alton Holybourne

The application pack is the same discipline whatever the project. A few of the Alton Holybourne neighbourhoods and property types we prepare drawings for most often:

Anstey (Alton)

Planning drawings for Anstey (Alton)'s conservation area designated in 1995 — scaled, validation-ready and drawn to East Hampshire District Council's guidance.

Holybourne

Planning drawings for Holybourne's conservation area designated in 1977 — scaled, validation-ready and drawn to East Hampshire District Council's guidance.

Alton

Planning drawings for Alton's civil parish within Alton Holybourne — scaled, validation-ready and drawn to East Hampshire District Council's guidance.

Which application do I make in Alton Holybourne?

The route decides what East Hampshire District Council needs and how long it takes. This is how the common Alton Holybourne routes compare.

RouteWhen it appliesCore drawingsTypical decision
Householder applicationExtensions and alterations to a single houseLocation, block, existing & proposed plans and elevationsAbout 8 weeks
Full applicationFlats, new units, changes of useAs householder plus site plan and often a section8–13 weeks
Lawful development certificateConfirming a scheme is permitted developmentExisting & proposed plans and elevations to prove PD limitsAbout 8 weeks
Prior approvalLarger single-storey rear extensionsPlans and elevations plus neighbour notificationAbout 6 weeks

In a conservation area such as Anstey (Alton) and Holybourne, householder permitted-development rights are often restricted, so a full application and heritage detail may be required.

Four steps to a validated Alton Holybourne application

A fixed process built around how East Hampshire District Council validates and decides — most drawing sets are submission-ready within seven days of survey.

  1. 1

    Free approval check

    Send us your Alton Holybourne postcode and what you want to build. We confirm your conservation and Article 4 status, tell you which application route applies, and score your odds against live East Hampshire District Council decisions.

  2. 2

    Measured survey

    We measure the property and plot so the existing plans and elevations are accurate to the millimetre — the base every proposed drawing and every officer judgement is built on.

  3. 3

    Drawing set & statement

    Chartered designers produce the full validation pack — location and block plans, existing and proposed plans, elevations, any section and a design and access statement — drawn to East Hampshire District Council's checklist.

  4. 4

    Submission & follow-through

    We lodge the application on the Planning Portal, manage validation and case-officer queries, and revise the drawings free until East Hampshire District Council issues its decision.

Frequently asked questions

What drawings do I need for a planning application in Alton Holybourne?

East Hampshire District Council validates a householder application against a set list: a location plan at 1:1250 with a red-line boundary, a block plan at 1:500, and existing and proposed floor plans and elevations at 1:100 or 1:50, each with a scale bar and north point. Larger schemes and most conservation-area work also need a design and access statement. If any of these is missing or unscaled the application is returned invalid before it is assessed. This applies to your Alton Holybourne address specifically.

Why do Alton Holybourne planning applications get returned as invalid?

Almost always because the drawing pack is incomplete or wrongly scaled — a missing block plan, an elevation with no scale, no red line on the location plan, no north point. East Hampshire District Council checks the pack against its validation list before an officer ever assesses the scheme, so these purely technical gaps cost weeks. Drawing to the checklist from the outset is the simplest way to avoid a return. This applies to your Alton Holybourne address specifically.

Can you submit the Alton Holybourne planning application for me?

Yes. We prepare the full drawing set, lodge it on the Planning Portal on your behalf, pay the East Hampshire District Council fee where you prefer us to, and then manage validation and case-officer questions through to the decision. You get the reference number and updates without dealing with the portal or the council yourself. This applies to your Alton Holybourne address specifically.

How long does East Hampshire District Council take to decide an application?

A householder application is a statutory eight weeks from validation, and a full application eight to thirteen weeks depending on scale. The date that matters is validation, not submission — an invalid pack never starts the clock. Because we draw to East Hampshire District Council's checklist the application validates quickly, so the statutory period begins without the delay a returned pack causes. This applies to your Alton Holybourne address specifically.

Do I need planning drawings if my project is permitted development in Alton Holybourne?

You do not strictly need a planning application, but scaled existing and proposed drawings are still worth having: a lawful development certificate from East Hampshire District Council proves the scheme is permitted development, which lenders and buyers increasingly ask for, and your builder needs the drawings to price and build. In a conservation area such as Anstey (Alton) and Holybourne, permitted-development rights are often removed, so a full application may be needed after all — we confirm which before you commit. This applies to your Alton Holybourne address specifically.

How much do planning application drawings in Alton Holybourne cost?

We price each Alton Holybourne job individually — the scope of the survey and the size of the drawing set vary from a simple rear extension to a whole-house scheme — and send a fixed, no-obligation quote within one working day. It covers the full validation pack with free revisions until East Hampshire District Council decides. The East Hampshire District Council application fee is separate and paid to the council. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Planning application drawings across East Hampshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Alton Holybourne