MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Listed building consent drawings in Billingshurst — historic building fabric recorded before alteration
Billingshurst · Listed Building Consent

Listed building consent drawings in Billingshurst

Listed building consent drawings for Billingshurst — measured as existing, proposed in the same detail, and supported by a heritage statement that answers Horsham District Council's conservation officer on the terms the 1990 Act actually sets.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

What the data says about planning in Billingshurst

Horsham District Council granted 97% of the householder planning decisions it made in its latest published year — 10 points above the 87% England-wide householder average. Billingshurst contains Adversane Conservation Area, Billingshurst Conservation Area conservation areas (Adversane Conservation Area designated 1976), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its mixed housing stock sets the design brief street by street.

Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Horsham District Council needs a full application. Billingshurst carries at least one Article 4 direction, and conservation areas including Adversane Conservation Area and Billingshurst Conservation Area remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Billingshurst is determined against an 8-week statutory target.

Adversane (conservation area designated in 1976) and Billingshurst (conservation area designated in 2018) — these are the Billingshurst pockets our drawings cover most. Heritage designations here include Adversane Conservation Area and Billingshurst Conservation Area. Horsham District Council weighs each proposal against Horsham District Council's adopted local plan and its householder design guidance, where the 4,300 homes here are 17% 2000-2008, 10% 1973-1982, 10% 1993-1999, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 2000s building and shallow trussed roofs typical of 1970s building, over 2000s houses and apartments (17% of 4,300 homes), 1970s and early-1980s houses (10%) and 1990s estate houses (10%).

Designations, stock and decisions in Billingshurst

Heritage designation is the single biggest variable in Billingshurst, and it is address-specific: Adversane (conservation area designated in 1976) and Billingshurst (conservation area designated in 2018). Inside those boundaries permitted development is curtailed and Horsham District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Horsham District Council has 53 recorded Article 4 directions, removing permitted development for rear and side extensions and roof enlargements such as dormers — check the address before assuming PD applies in Billingshurst.

On stock, Billingshurst is 2000s houses and apartments (17% of 4,300 homes), 1970s and early-1980s houses (10%) and 1990s estate houses (10%) — which is why trussed-rafter roofs typical of 2000s building and shallow trussed roofs typical of 1970s building govern what a loft or rear projection can realistically be. Horsham District Council decided 679 householder applications in the latest published year and granted 97%, with 72% issued inside the eight-week target. We work from the council's own published record.

The full build-period split for Billingshurst runs pre-1900 8% (330 homes), 1900-1918 2% (70 homes), 1919-1929 1% (30 homes), 1930-1939 3% (130 homes), 1945-1954 5% (210 homes), 1955-1964 5% (210 homes), 1965-1972 10% (430 homes), 1973-1982 10% (450 homes), 1983-1992 8% (330 homes), 1993-1999 10% (440 homes) and 2000-2008 17% (710 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Horsham District Council also decides for Colgate & Rusper, Denne, Holbrook West and Steyning & Ashurst, so a decision in Billingshurst sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

The Article 4 directions recorded for this council include ART4002 - LAND AT WOLVENS FARM BILLINGSHURST ROAD ASHINGTON, ART4003 - LAND AT CODMORE HILL PULBOROUGH, ART4020/1 and ART4040. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.

The published numbers behind a Billingshurst application

Published figures for Billingshurst and Horsham District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureBillingshurst
Dwellings recorded4,300
Built pre-1900330 (8%)
Built 1900-191870 (2%)
Built 1919-192930 (1%)
Built 1930-1939130 (3%)
Built 1945-1954210 (5%)
Built 1955-1964210 (5%)
Built 1965-1972430 (10%)
Built 1973-1982450 (10%)
Built 1983-1992330 (8%)
Built 1993-1999440 (10%)
Built 2000-2008710 (17%)
Built before 19199%
Built 1919–19394%
Built 1945–200865%
Conservation areas in Billingshurst2 (Adversane Conservation Area, Billingshurst Conservation Area)
Conservation areas district-wide40
Article 4 directions recorded53
Householder applications decided679
Householder applications granted97%
Decided within 8 weeks72%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Horsham District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

What consent actually protects in a Billingshurst listed building

Listing protects the whole building, not the front elevation. Removing a partition, replacing a staircase balustrade, changing a floor finish, or lining a wall with insulation are all alterations to special interest, and all can require consent. That surprises owners far more often than the external rules do — and it is why the first deliverable on a listed project is an accurate record of what is there, not a proposal for what replaces it.

Billingshurst sits within an area of 2000s houses and apartments (17% of 4,300 homes), 1970s and early-1980s houses (10%) and 1990s estate houses (10%), and its designated heritage includes Adversane Conservation Area and Billingshurst Conservation Area. Conservation-area designation and listing are different things and frequently overlap: a listed house inside a conservation area needs consent for internal work under the listing, and is judged on its contribution to the wider area under the designation. We establish both before proposing anything.

Section 16(2) of the 1990 Act requires Horsham District Council to have special regard to the desirability of preserving the building, its setting and any features of special architectural or historic interest. In practice that means the drawings must show what is being lost as clearly as what is being gained, and the case for the intervention must be made on heritage terms rather than on convenience.

Survey drawing of listed building fabric in Billingshurst

When do you need listed building consent in Billingshurst?

Consent from Horsham District Council is required for works affecting special interest. That commonly includes:

  • Removing, altering or forming internal walls, doorways or staircases
  • Replacing windows or doors, including like-for-like where detail changes
  • Re-roofing in a different material, or altering chimneys
  • Internal insulation, damp treatment or re-plastering in historic fabric
  • New services routed through historic fabric — heating, wiring, ventilation
  • Works to curtilage structures such as walls, outbuildings and railings
  • Demolition of any part of the building, however small
  • Signage, external lighting or satellite equipment fixed to the building

Billingshurst heritage decisions — live from council data

Below is Horsham District Council's real decision record, drawn from official planning statistics and refreshed as new data lands. Horsham District Council granted 97% of its householder applications in the year to 31 March 2026, and Adversane Conservation Area shapes what is approved here. Listed applications are decided on the quality of the record and the justification, which is where most refusals actually originate.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

97%householder applications approved in Horsham
87%national average — Horsham is 10 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What gets consented on listed buildings in Billingshurst

Across Adversane and Billingshurst, the schemes that get consent tend to be reversible, legible and honest: new work that reads as new rather than as imitation, services routed in existing chases rather than cut into original fabric, and interventions concentrated in later or lower-significance parts of the building. Rear additions in a contemporary idiom are often accepted where a pastiche extension is refused.

Billingshurst contains Adversane Conservation Area, Billingshurst Conservation Area conservation areas (Adversane Conservation Area designated 1976), so materials, fenestration and roof form are assessed against the appraisal. Where planning permission is needed as well — for an extension, say — the two applications run in parallel and are usually determined together. We prepare them as a single coordinated set so the heritage case and the planning case do not contradict each other, which is a surprisingly common reason for a refusal on an otherwise sound scheme.

Listed building consent drawing pack for a property in Billingshurst

Listed building work across Billingshurst

We prepare listed building consent packs across Billingshurst. A few of the areas where heritage work comes up most often:

Adversane

Listed building consent drawings for Adversane — conservation area designated in 1976 — surveyed as existing and drawn to the detail Horsham District Council's conservation officer needs.

Billingshurst

Listed building consent drawings for Billingshurst — conservation area designated in 2018 — surveyed as existing and drawn to the detail Horsham District Council's conservation officer needs.

Listed building consent or planning permission in Billingshurst?

They are separate consents with different tests, and many projects need both.

ConsentWhat it coversFeeConsequence of proceeding without it
Listed building consentWorks affecting special interest, internal and externalNoneCriminal offence under section 9 of the 1990 Act
Planning permissionDevelopment — extensions, outbuildings, use changesPayableEnforcement action; may become immune after 10 years
Conservation area consent contextDemolition and character in a designated areaVariesEnforcement; prosecution for unauthorised demolition
Building regulationsStructure, fire, insulation, ventilationPayableEnforcement notice; problems on sale

Sources: Planning (Listed Buildings and Conservation Areas) Act 1990, sections 7, 9 and 16(2); Town and Country Planning Act 1990.

Four steps to consent on a Billingshurst listed building

A process built around what a conservation officer actually assesses.

  1. 1

    Free initial check

    Send us the address and the listing entry. We confirm grade, what the listing covers, whether curtilage structures are caught, and how Horsham District Council has treated comparable schemes.

  2. 2

    Measured record of the building

    We survey as existing in real detail — plans, elevations, sections and the features that carry the significance — because a proposal cannot be assessed against a record that does not exist.

  3. 3

    Proposal & heritage statement

    We draw the proposal in matching detail and write the heritage statement that identifies significance, impact and justification in the terms section 16(2) requires.

  4. 4

    Submission & follow-through

    We submit to Horsham District Council, engage with the conservation officer, and revise the drawings free until the decision is issued.

Frequently asked questions

Do I need listed building consent for internal work in Billingshurst?

Frequently, yes. Listing covers the whole building, so removing a partition, altering a staircase, replacing joinery or re-plastering historic surfaces can all require consent from Horsham District Council. There is no internal exemption and no size threshold. The safe route is to establish what is significant before work is designed, which is what the measured survey is for. This applies to your Billingshurst address specifically.

What happens if work is done without listed building consent in Billingshurst?

Carrying out unauthorised works to a listed building is a criminal offence under section 9 of the Planning (Listed Buildings and Conservation Areas) Act 1990, and it does not become lawful with the passage of time the way some planning breaches do. Horsham District Council can require reinstatement. Where work has already happened, an application for retrospective consent is usually the right first step, and we can advise on it. This applies to your Billingshurst address specifically.

Is there a fee for listed building consent in Billingshurst?

No. Listed building consent applications carry no application fee, which sometimes leads owners to assume the process is lighter than a planning application. It is not — the evidence expected is greater, because the decision rests on the effect on special interest rather than on amenity, and an under-documented submission is the most common cause of delay. This applies to your Billingshurst address specifically. Horsham District Council is the decision-maker.

Do I need planning permission as well as listed building consent in Billingshurst?

If the work is also development — an extension, an outbuilding, a change of use — then yes, and the two applications run in parallel to Horsham District Council. Internal alterations usually need only listed building consent. Where both are required we prepare them as one coordinated set, because inconsistencies between the two submissions are a recurring reason for delay. This applies to your Billingshurst address specifically.

Can I replace the windows in a listed building in Billingshurst?

Sometimes, but rarely with modern units. Historic windows are often the single most significant surviving feature, and replacement is judged on the condition of the existing joinery and the accuracy of what replaces it — glazing bar profile, glass type, opening method and reveal depth all matter. Repair and secondary glazing are usually the route that gains consent, particularly inside designated areas such as Adversane Conservation Area and Billingshurst Conservation Area. Horsham District Council is the decision-maker.

How long does listed building consent take in Billingshurst?

The statutory target is eight weeks from validation for most applications, and thirteen for larger schemes. In practice the timetable is set by how complete the submission is: a conservation officer who has to ask what the existing fabric looks like will take longer than one who can see it. We submit a record that answers those questions upfront. This applies to your Billingshurst address specifically. Horsham District Council is the decision-maker.

How much do listed building drawings in Billingshurst cost?

We quote each Billingshurst listed project individually, because the survey effort depends entirely on the building's complexity and how much of the fabric the work touches, and send a fixed, no-obligation quote within one working day. It covers survey, drawings and heritage statement, with free revisions until Horsham District Council decides. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Listed building consent drawings across Horsham

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Billingshurst