MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Larger home extension prior approval in Buckland & Milber — a deep single-storey rear extension to a house
Buckland & Milber · Prior Approval & Neighbour Consultation

Larger home extension prior approval in Buckland & Milber

The fast route to a deep single-storey rear extension in Buckland & Milber — up to 6 metres on an attached house or 8 on a detached one — via Teignbridge District Council's prior approval scheme rather than a full planning application.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Buckland & Milber householder planning by the numbers

Teignbridge District Council granted 82% of the householder planning decisions it made in its latest published year — 5 points below the 87% England-wide householder average. Buckland & Milber contains the Courtenay Park and Devon Square conservation area (Courtenay Park and Devon Square designated 1976), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant postwar (1945–1970) housing stock sets the design brief on most streets.

Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Courtenay Park and Devon Square those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Buckland & Milber is determined against an 8-week statutory target.

Courtenay Park and Devon Square (conservation area designated in 1976), Haccombe with Combe (civil parish within Buckland & Milber) and Newton Abbot (civil parish within Buckland & Milber) — these are the Buckland & Milber pockets our drawings cover most. Heritage designations here include Courtenay Park and Devon Square. Teignbridge District Council weighs each proposal against Teignbridge District Council's adopted local plan and its householder design guidance, where the 3,210 homes here are 27% 1955-1964, 20% 1965-1972, 18% 1945-1954, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow gabled roofs typical of that period's building and shallow-pitched roofs and integral garages typical of that period's building, over late-1950s and early-1960s houses (27% of 3,210 homes), late-1960s and early-1970s houses (20%) and early postwar houses (18%).

What actually constrains a project in Buckland & Milber

Buckland & Milber's designated heritage is specific, and it is the first thing we check against your address: Courtenay Park and Devon Square (conservation area designated in 1976). Inside those boundaries permitted development is curtailed and Teignbridge District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Buckland & Milber takes in Haccombe with Combe and Newton Abbot. No Article 4 direction is recorded for Teignbridge District Council, but Buckland & Milber's 1 conservation area still limit permitted development on those streets.

On stock, Buckland & Milber is late-1950s and early-1960s houses (27% of 3,210 homes), late-1960s and early-1970s houses (20%) and early postwar houses (18%) — which is why shallow gabled roofs typical of that period's building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. Teignbridge District Council decided 325 householder applications in the latest published year and granted 82%, with 80% issued inside the eight-week target. Those are the numbers our drawings are prepared against.

The full build-period split for Buckland & Milber runs pre-1900 0% (10 homes), 1919-1929 3% (100 homes), 1930-1939 4% (140 homes), 1945-1954 18% (590 homes), 1955-1964 27% (860 homes), 1965-1972 20% (650 homes), 1973-1982 6% (180 homes), 1983-1992 13% (430 homes), 1993-1999 2% (80 homes) and 2000-2008 3% (100 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

Teignbridge District Council also decides for Ambrook, Bovey, Chudleigh, College, Dawlish South West, Kenn Valley, Kenton & Starcross and Kerswell-with-Combe, so a decision in Buckland & Milber sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Buckland & Milber in numbers — housing stock and planning decisions

Published figures for Buckland & Milber and Teignbridge District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureBuckland & Milber
Dwellings recorded3,210
Built pre-190010 (0%)
Built 1919-1929100 (3%)
Built 1930-1939140 (4%)
Built 1945-1954590 (18%)
Built 1955-1964860 (27%)
Built 1965-1972650 (20%)
Built 1973-1982180 (6%)
Built 1983-1992430 (13%)
Built 1993-199980 (2%)
Built 2000-2008100 (3%)
Built before 19190%
Built 1919–19397%
Built 1945–200890%
Conservation areas in Buckland & Milber1 (Courtenay Park and Devon Square)
Conservation areas district-wide35
Article 4 directions recorded0
Householder applications decided325
Householder applications granted82%
Decided within 8 weeks80%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Teignbridge District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

How the prior approval route works in Buckland & Milber

The ordinary Class A limits stop a single-storey rear extension at 3 metres on an attached house and 4 on a detached one. The larger home extension scheme doubles both, on condition that the council is told first. That notification is not an application for permission — the council cannot refuse on design, materials or policy grounds. It can only consider the effect on the amenity of adjoining premises, and only if a neighbour actually objects during the 21-day consultation.

The other conditions still apply and are strict: single storey only, no higher than 4 metres, eaves no higher than the existing eaves, and no more than half the land around the original house covered. It is not available on designated land, so a house in a conservation area such as Courtenay Park and Devon Square cannot use it at all. Materials must be similar to the existing house, and the extension must not include a veranda, balcony or raised platform.

Buckland & Milber is largely late-1950s and early-1960s houses (27% of 3,210 homes), late-1960s and early-1970s houses (20%) and early postwar houses (18%). Buckland & Milber contains the Courtenay Park and Devon Square conservation area (Courtenay Park and Devon Square designated 1976), so materials, fenestration and roof form are assessed against the appraisal, which matters here because an objecting neighbour puts amenity squarely in front of a case officer. No Article 4 direction is recorded for Teignbridge District Council, but Buckland & Milber's 1 conservation area still limit permitted development on those streets.

Isometric drawing of a deep rear extension in Buckland & Milber

Does your Buckland & Milber extension qualify for prior approval?

The scheme is available where all of these hold. Fail any one and it is a full application to Teignbridge District Council instead:

  • The extension is single storey and rear-facing
  • It projects no more than 6 metres on a terraced or semi-detached house, or 8 metres on a detached house
  • It is no more than 4 metres high, with eaves no higher than the existing eaves
  • The property is a house, not a flat or maisonette
  • The property is not on designated land — the scheme is unavailable in conservation areas such as Courtenay Park and Devon Square
  • No more than half the land around the original house is covered by buildings
  • The materials are similar in appearance to the existing house
  • You notify the council BEFORE building — retrospective use of the scheme is not possible

Buckland & Milber householder decisions — live from council data

Below is Teignbridge District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Teignbridge District Council granted 82% of its householder applications in the year to 31 March 2026, and Courtenay Park and Devon Square shapes what is approved here. Prior approval turns on neighbour amenity alone, so the drawings that matter are the ones showing the relationship to the boundary.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

82%householder applications approved in Teignbridge
87%national average — Teignbridge is 5 points below the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What gets through prior approval in Buckland & Milber

Across Courtenay Park and Devon Square, Haccombe with Combe and Newton Abbot, the notifications that clear without objection are the ones that treat the neighbour as the audience. We show the extension in section against the boundary, demonstrate the 45-degree daylight relationship to the nearest habitable window, and where the plot is tight we taper the depth away from the boundary rather than running the full 6 metres to the fence.

The 3,210 homes here are 27% 1955-1964, 20% 1965-1972, 18% 1945-1954, which is what sets the realistic roof and rear-projection options. Where an objection does arrive, the council's assessment is narrow: loss of light, outlook and overbearing effect on the adjoining property, nothing else. A pack that has already answered those three points on the drawings usually survives an objection, whereas one that leaves them to the officer's imagination usually does not.

Deep single-storey rear extension to a house in Buckland & Milber

Larger home extensions across Buckland & Milber

We prepare prior-approval notifications across Buckland & Milber. A few of the areas where deep rear extensions come up most often:

Courtenay Park and Devon Square

Prior approval drawings for Courtenay Park and Devon Square — conservation area designated in 1976 — dimensioned to the 6m and 8m limits and prepared for Teignbridge District Council's neighbour consultation.

Haccombe with Combe

Prior approval drawings for Haccombe with Combe — civil parish within Buckland & Milber — dimensioned to the 6m and 8m limits and prepared for Teignbridge District Council's neighbour consultation.

Newton Abbot

Prior approval drawings for Newton Abbot — civil parish within Buckland & Milber — dimensioned to the 6m and 8m limits and prepared for Teignbridge District Council's neighbour consultation.

Prior approval or full application in Buckland & Milber?

Same extension, two routes, very different tests.

RouteDepth allowedWhat the council may considerTimescale
Ordinary Class A permitted development3m attached / 4m detachedNothing — no application neededImmediate
Larger home extension prior approval6m attached / 8m detachedAmenity of adjoining premises, only if a neighbour objects21-day consultation, 42-day determination
Full householder applicationNo fixed limitDesign, materials, policy, amenity, everything8-week target
Any of these on designated land3m / 4m onlyPrior approval scheme unavailableFull application beyond the limits

Limits and procedure from the GPDO 2015, Schedule 2, Part 1, Class A and paragraph A.4, made permanent by amendment in 2019.

Four steps to prior approval in Buckland & Milber

A process built around the 21-day consultation, which is where these schemes are won or lost.

  1. 1

    Free eligibility check

    Send us your Buckland & Milber postcode and house type. We confirm whether the property is on designated land, whether the scheme is available, and what depth you can realistically take.

  2. 2

    Measured survey

    We measure the original rear wall, eaves height, boundary distances and the neighbouring windows that the amenity assessment will turn on.

  3. 3

    Notification pack

    We draw the extension to the 6m or 8m limit with the boundary relationship shown in section, and prepare the written description and adjoining-owner details Teignbridge District Council needs to start the consultation.

  4. 4

    Consultation & follow-through

    We submit, track the 21-day consultation and the 42-day determination, respond to any objection on amenity grounds, and revise free until the decision.

Frequently asked questions

How deep can a rear extension be in Buckland & Milber without planning permission?

Three metres on a terraced or semi-detached house and four on a detached one under ordinary permitted development. Under the larger home extension prior approval scheme those double to six and eight metres, provided you notify Teignbridge District Council before starting and the conditions on height, materials and land coverage are met. The scheme is not available on designated land. This applies to your Buckland & Milber address specifically.

What is prior approval for a larger home extension in Buckland & Milber?

It is a notification, not an application for permission. You tell Teignbridge District Council what you intend to build, it writes to the adjoining owners, and they have 21 days to object. If nobody objects, you may build. If someone does, the council assesses the effect on the amenity of adjoining premises and must decide within 42 days. Design and policy are not in scope. This applies to your Buckland & Milber address specifically.

What happens if my neighbour objects in Buckland & Milber?

The council then considers the impact on the amenity of the adjoining property — loss of light, loss of outlook, and overbearing effect — and nothing else. It cannot refuse because it dislikes the design or the materials. We prepare the drawings so those three questions are already answered in section and on the site plan, which is what usually carries an objected scheme through. This applies to your Buckland & Milber address specifically. Teignbridge District Council is the decision-maker.

Can I use prior approval in a Buckland & Milber conservation area?

No. The larger home extension scheme is unavailable on designated land, which includes conservation areas such as Courtenay Park and Devon Square, national landscapes, national parks and world heritage sites. On those properties the ordinary 3-metre and 4-metre limits apply, and anything deeper needs a full householder application to Teignbridge District Council. This applies to your Buckland & Milber address specifically.

How long does prior approval take in Buckland & Milber?

Twenty-one days for the neighbour consultation, and a maximum of 42 days from a valid submission for the council to determine it. If the council does not respond within 42 days you may proceed as notified. That deadline is the scheme's real advantage over a full application, and it is why validation completeness matters so much. This applies to your Buckland & Milber address specifically. Teignbridge District Council is the decision-maker.

Do I still need building regulations approval in Buckland & Milber?

Yes — always. Prior approval deals only with the planning position. A 6-metre rear extension still needs building control approval for foundations, structure, drainage, thermal performance and fire safety, and the beam over the opening into the existing house needs designing and calculating. We prepare both sets so the notified scheme is the buildable one. This applies to your Buckland & Milber address specifically. Teignbridge District Council is the decision-maker.

How much do prior approval drawings in Buckland & Milber cost?

We quote each Buckland & Milber scheme individually, because plot shape and the boundary relationship drive the work, and send a fixed, no-obligation quote within one working day. It covers the notification pack and free revisions until Teignbridge District Council determines it. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Larger home extension prior approval across Teignbridge

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Buckland & Milber