
Hip-to-gable drawings for Kemp Town semis and end-terraces — building the sloping hipped end up into a flat gable wall to unlock the full width of the roof, drawn to Brighton & Hove City Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
Brighton & Hove City Council granted 89% of the householder planning decisions it made in its latest published year — 2 points above the 87% England-wide householder average. The Kemp Town estate holds one of the densest concentrations of Grade I and Grade II* listing in the city, so alterations are assessed against the original architectural set piece, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837) and Victorian (1837–1901) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Kemp Town carries at least one Article 4 direction, and conservation areas including Kemp Town, East Cliff and Queen's Park remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Kemp Town is determined against an 8-week statutory target.
Kemp Town estate (Busby and Wilds' 1820s set piece of Sussex Square and Lewes Crescent), East Cliff (bow-fronted Regency terraces stepping up from Marine Parade), Queen's Park (Victorian terraces and villas around the park bowl), College (planned Victorian streets near Brighton College), Kemptown Village (the compact St George's Road high-street terraces) and Whitehawk fringe (later housing climbing the eastern downland slope) — these are the Kemp Town pockets our drawings cover most. Heritage designations here include Kemp Town, East Cliff, Queen's Park and College. Brighton & Hove City Council weighs each proposal against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, where basement, lightwell and seafront-frontage proposals meet detailed structural and heritage tests before the usual householder considerations. Large tracts of the Regency terraces are long since converted into flats and maisonettes, which hold no householder permitted-development rights.. On roofs the borough is parapet-hidden flat and shallow leaded roofs on the Regency estate, butterfly roofs behind the terrace fronts and pitched slate roofs on the Victorian streets, over Grade I and Grade II* Regency stucco terraces, bow-fronted seafront houses, Victorian bay-fronted terraces and converted flats and maisonettes.
The hip-to-gable is the semi's loft, and Kemp Town has the stock that needs it — the borough runs to Grade I and Grade II* Regency stucco terraces, bow-fronted seafront houses, Victorian bay-fronted terraces and converted flats and maisonettes, and wherever the roof is hipped it wastes the triangle of space where the slope cuts in at the side. Build that hip up into a gable wall and the loft gains full-height room right across the width, usually with a rear dormer behind it. Brighton & Hove City Council judges the scheme against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, and because the gable is a side elevation it is read against the neighbouring house first.
That neighbour relationship is the drawing's job. We build the gable to the original ridge line, match the brick or render and the verge detail to the host, and where the house is one of a mirrored pair we show the new gable against the neighbour's retained hip so the officer can weigh the balance. The Kemp Town estate holds one of the densest concentrations of Grade I and Grade II* listing in the city, so alterations are assessed against the original architectural set piece, and on a paired roof that is precisely the test a hip-to-gable has to pass.
Where Kemp Town's streets are designated — Kemp Town, East Cliff, Queen's Park and College among them — a hip-to-gable is scrutinised hard, because losing a hip changes the roofscape the area is protected for. Kemp Town falls under the city-wide Article 4 direction removing permitted-development rights for small HMOs, and the Kemp Town and East Cliff conservation-area controls pull most external alterations to the listed Regency terraces into the application system. We check the designation before the gable is drawn.

A hip-to-gable in Kemp Town is not permitted development — extending the roof up and out over the hip takes it past what Class B allows — so it needs a full application to Brighton & Hove City Council. These are the points the council weighs:
We draw the new gable to the existing ridge, the verge and materials matched to the host, and the balance with the neighbour's retained hip — the side-elevation relationships Brighton & Hove City Council's officers check first — and submit a validation-complete householder application, usually with the rear dormer on the same drawings.
Below is Brighton & Hove City Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. The council approves most householder schemes across the city, yet in Kemp Town the concentration of high-grade listed terraces means heritage impact, not principle, decides how far a project can go. A hip-to-gable turns on side-elevation bulk and the balance of the pair, so a pack that draws the gable against the neighbour is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Kemp Town estate, East Cliff and Queen's Park, the hip-to-gable that goes through is the restrained one: the gable built to the original ridge rather than above it, materials matched so the extended end reads as part of the house, and — on a pair — the new wall sitting comfortably beside the neighbour's hip rather than overwhelming it. On the borough's grade i and grade ii* regency stucco terraces, squaring one or both hips is what makes the whole loft usable, which is why it is nearly always drawn with a rear dormer behind.
Basement, lightwell and seafront-frontage proposals meet detailed structural and heritage tests before the usual householder considerations. We hold the gable to the ridge, detail the verge and the flank window to sit quietly, and present the gable and dormer as one roof alteration — so Brighton & Hove City Council assesses a single coherent change to the roof rather than two competing ones.

We draw hip-to-gable lofts on the semi-detached and end-of-terrace streets across the borough. A few of the neighbourhoods where Kemp Town hip-to-gables come up most often:
Hip-to-gable loft drawings for Kemp Town estate's Busby and Wilds' 1820s set piece of Sussex Square and Lewes Crescent — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
Hip-to-gable loft drawings for East Cliff's bow-fronted Regency terraces stepping up from Marine Parade — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
Hip-to-gable loft drawings for Queen's Park's Victorian terraces and villas around the park bowl — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
Hip-to-gable loft drawings for College's planned Victorian streets near Brighton College — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
Hip-to-gable loft drawings for Kemptown Village's the compact St George's Road high-street terraces — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
Hip-to-gable loft drawings for Whitehawk fringe's later housing climbing the eastern downland slope — ridge-matched, pair-balanced and drawn to Brighton & Hove City Council's guidance.
A hip-to-gable only applies where the roof is hipped — and what it gains depends on the house. This is how the cases compare.
| Roof / house type | Hip-to-gable route | What it gains | What Brighton & Hove City Council checks |
|---|---|---|---|
| Hipped semi-detached | Full application, one gable | Full-width loft on the hipped side | Balance with the paired neighbour |
| Hipped end-terrace | Full application, one gable | Squares off the exposed end | Side elevation and street rhythm |
| Hipped detached | Full application, one or both ends | Loft across the whole roof | Bulk and the wider roofscape |
| Already gabled roof | Not needed — dormer only | Space via a rear dormer instead | Dormer volume and set-back |
In conservation areas such as Kemp Town and East Cliff, the loss of a hip is resisted and a hip-to-gable is assessed on its effect on the protected roofscape.
A fixed process built around how Brighton & Hove City Council validates and decides hip-to-gable applications — most drawings are submission-ready within seven days of survey.
Send us your Kemp Town postcode and whether your roof is hipped one or both ends. We confirm your conservation and Article 4 status and score your odds against live Brighton & Hove City Council decisions.
We measure the ridge and eaves, the hip geometry and — on a pair — the neighbour's roof, so the new gable can be drawn to the original ridge and balanced against the adjoining house.
Chartered designers develop the gable and its rear dormer to your brief, drawn to Brighton & Hove City Council's roof-alteration guidance with the side elevation and neighbour relationship resolved on the page.
We submit the householder application, manage validation and case-officer queries, and revise the drawings free until Brighton & Hove City Council issues its decision.
Yes. A hip-to-gable rebuilds the sloping hipped end of the roof as a vertical gable, and because that extends the roof it falls outside permitted development — so it always needs a full householder application to Brighton & Hove City Council, whether or not your street is designated. It is usually submitted together with a rear dormer as a single roof-alteration application. This applies to your Kemp Town address specifically.
It replaces the roof's sloping hipped end with a flat gable wall built up to the ridge, turning the wasted triangle where the slope cuts in into full-height loft space across the width of the house. Kemp Town's hipped semis and end-terraces suit it especially well, and it is nearly always paired with a rear dormer to open up the back of the roof too. Brighton & Hove City Council is the decision-maker.
Yes, and a matching pair often reads better to Brighton & Hove City Council than a single gable on one side, because it keeps the two houses balanced. Where only one owner converts, we draw the new gable carefully against the neighbour's retained hip so the officer can see the pair still works. The balance of the pair is one of the main things the council weighs. This applies to your Kemp Town address specifically.
Almost always. The gable opens up the side of the roof and a rear dormer opens up the back, and together they make the whole loft usable — so in Kemp Town the two are typically drawn and submitted as one application to Brighton & Hove City Council. Presenting them together means the council assesses a single coherent change to the roof rather than two separate alterations.
Usually, on a semi or end-terrace. The gable is built up off the flank, and the loft steelwork often bears on the party wall, so the Party Wall etc. Act applies and notice must be served before work starts — separately from Brighton & Hove City Council's planning decision. We detail the junction on the drawings and flag the notice early so a surveyor can be appointed without delay. This applies to your Kemp Town address specifically.
We price each Kemp Town hip-to-gable individually, because the roof geometry and whether it is one gable or two vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack — usually gable plus rear dormer — with free revisions until Brighton & Hove City Council approves. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.