Hip-to-gable drawings for Basford semis and end-terraces — building the sloping hipped end up into a flat gable wall to unlock the full width of the roof, drawn to Nottingham City Council's guidance, delivered in days and revised free until your decision, with a free approval-odds check first.
Nottingham City Council granted 86% of the householder planning decisions it made in its latest published year — 1 point below the 87% England-wide householder average. The Article 4 Direction removes the automatic right to convert family homes to small HMOs, so shared-house schemes need consent, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901), Edwardian (1901–1910), interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Basford carries at least one Article 4 direction, and conservation areas including Star Buildings and New Basford remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Basford is determined against an 8-week statutory target.
New Basford (close-knit brewery-era terraces around the Star Buildings conservation area), Old Basford (older village core with mixed period and interwar housing), Shipstone Street (workers' terraces beside the former Shipstone's Brewery), Basford fringe (interwar and postwar semis on the surrounding streets) and Vernon Park edge (Victorian terraces bordering the park to the south) — these are the Basford pockets our drawings cover most. Heritage designations here include Star Buildings and New Basford. Nottingham City Council weighs each proposal against the Nottingham City Local Plan (Land and Planning Policies) and the Greater Nottingham Strategic Plan, where the Star Buildings Conservation Area treats the brewery and its surrounding terraces as an industrial-heritage set piece, policing materials and frontages. Former brewery and industrial buildings in New Basford have been converted to flats, and those units carry no householder permitted-development rights.. On roofs the borough is pitched slate roofs on the Victorian and Edwardian terraces and hipped roofs on the interwar semis, over dense Victorian and Edwardian red-brick terraces built for brewery and factory workers, former industrial and brewery buildings, some converted to residential and interwar and postwar semis in Old Basford and towards the fringes.
The hip-to-gable is the semi's loft, and Basford has the stock that needs it — the borough runs to dense Victorian and Edwardian red-brick terraces built for brewery and factory workers, former industrial and brewery buildings, some converted to residential and interwar and postwar semis in Old Basford and towards the fringes, and wherever the roof is hipped it wastes the triangle of space where the slope cuts in at the side. Build that hip up into a gable wall and the loft gains full-height room right across the width, usually with a rear dormer behind it. Nottingham City Council judges the scheme against the Nottingham City Local Plan (Land and Planning Policies) and the Greater Nottingham Strategic Plan, and because the gable is a side elevation it is read against the neighbouring house first.
That neighbour relationship is the drawing's job. We build the gable to the original ridge line, match the brick or render and the verge detail to the host, and where the house is one of a mirrored pair we show the new gable against the neighbour's retained hip so the officer can weigh the balance. The Article 4 Direction removes the automatic right to convert family homes to small HMOs, so shared-house schemes need consent, and on a paired roof that is precisely the test a hip-to-gable has to pass.
Where Basford's streets are designated — Star Buildings and New Basford among them — a hip-to-gable is scrutinised hard, because losing a hip changes the roofscape the area is protected for. Nottingham's city-wide Article 4 HMO Direction applies across Basford, and the Star Buildings Conservation Area in New Basford protects the industrial heritage around the former Shipstone's Brewery — a close-knit mix of brewery buildings, terraced housing, pubs, schools and chapels. We check the designation before the gable is drawn.
A hip-to-gable in Basford is not permitted development — extending the roof up and out over the hip takes it past what Class B allows — so it needs a full application to Nottingham City Council. These are the points the council weighs:
We draw the new gable to the existing ridge, the verge and materials matched to the host, and the balance with the neighbour's retained hip — the side-elevation relationships Nottingham City Council's officers check first — and submit a validation-complete householder application, usually with the rear dormer on the same drawings.
Below is Nottingham City Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Nottingham grants around 86% of applications, and Basford's terraced and suburban streets approve well for household work, with the Shipstone's brewery heritage the defining constraint in New Basford. A hip-to-gable turns on side-elevation bulk and the balance of the pair, so a pack that draws the gable against the neighbour is decided faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across New Basford, Old Basford and Shipstone Street, the hip-to-gable that goes through is the restrained one: the gable built to the original ridge rather than above it, materials matched so the extended end reads as part of the house, and — on a pair — the new wall sitting comfortably beside the neighbour's hip rather than overwhelming it. On the borough's dense victorian and edwardian red-brick terraces built for brewery and factory workers, squaring one or both hips is what makes the whole loft usable, which is why it is nearly always drawn with a rear dormer behind.
The Star Buildings Conservation Area treats the brewery and its surrounding terraces as an industrial-heritage set piece, policing materials and frontages. We hold the gable to the ridge, detail the verge and the flank window to sit quietly, and present the gable and dormer as one roof alteration — so Nottingham City Council assesses a single coherent change to the roof rather than two competing ones.
We draw hip-to-gable lofts on the semi-detached and end-of-terrace streets across the borough. A few of the neighbourhoods where Basford hip-to-gables come up most often:
Hip-to-gable loft drawings for New Basford's close-knit brewery-era terraces around the Star Buildings conservation area — ridge-matched, pair-balanced and drawn to Nottingham City Council's guidance.
Hip-to-gable loft drawings for Old Basford's older village core with mixed period and interwar housing — ridge-matched, pair-balanced and drawn to Nottingham City Council's guidance.
Hip-to-gable loft drawings for Shipstone Street's workers' terraces beside the former Shipstone's Brewery — ridge-matched, pair-balanced and drawn to Nottingham City Council's guidance.
Hip-to-gable loft drawings for Basford fringe's interwar and postwar semis on the surrounding streets — ridge-matched, pair-balanced and drawn to Nottingham City Council's guidance.
Hip-to-gable loft drawings for Vernon Park edge's Victorian terraces bordering the park to the south — ridge-matched, pair-balanced and drawn to Nottingham City Council's guidance.
A hip-to-gable only applies where the roof is hipped — and what it gains depends on the house. This is how the cases compare.
| Roof / house type | Hip-to-gable route | What it gains | What Nottingham City Council checks |
|---|---|---|---|
| Hipped semi-detached | Full application, one gable | Full-width loft on the hipped side | Balance with the paired neighbour |
| Hipped end-terrace | Full application, one gable | Squares off the exposed end | Side elevation and street rhythm |
| Hipped detached | Full application, one or both ends | Loft across the whole roof | Bulk and the wider roofscape |
| Already gabled roof | Not needed — dormer only | Space via a rear dormer instead | Dormer volume and set-back |
In conservation areas such as Star Buildings and New Basford, the loss of a hip is resisted and a hip-to-gable is assessed on its effect on the protected roofscape.
A fixed process built around how Nottingham City Council validates and decides hip-to-gable applications — most drawings are submission-ready within seven days of survey.
Send us your Basford postcode and whether your roof is hipped one or both ends. We confirm your conservation and Article 4 status and score your odds against live Nottingham City Council decisions.
We measure the ridge and eaves, the hip geometry and — on a pair — the neighbour's roof, so the new gable can be drawn to the original ridge and balanced against the adjoining house.
Chartered designers develop the gable and its rear dormer to your brief, drawn to Nottingham City Council's roof-alteration guidance with the side elevation and neighbour relationship resolved on the page.
We submit the householder application, manage validation and case-officer queries, and revise the drawings free until Nottingham City Council issues its decision.
Yes. A hip-to-gable rebuilds the sloping hipped end of the roof as a vertical gable, and because that extends the roof it falls outside permitted development — so it always needs a full householder application to Nottingham City Council, whether or not your street is designated. It is usually submitted together with a rear dormer as a single roof-alteration application. This applies to your Basford address specifically.
It replaces the roof's sloping hipped end with a flat gable wall built up to the ridge, turning the wasted triangle where the slope cuts in into full-height loft space across the width of the house. Basford's hipped semis and end-terraces suit it especially well, and it is nearly always paired with a rear dormer to open up the back of the roof too. Nottingham City Council is the decision-maker.
Yes, and a matching pair often reads better to Nottingham City Council than a single gable on one side, because it keeps the two houses balanced. Where only one owner converts, we draw the new gable carefully against the neighbour's retained hip so the officer can see the pair still works. The balance of the pair is one of the main things the council weighs. This applies to your Basford address specifically.
Almost always. The gable opens up the side of the roof and a rear dormer opens up the back, and together they make the whole loft usable — so in Basford the two are typically drawn and submitted as one application to Nottingham City Council. Presenting them together means the council assesses a single coherent change to the roof rather than two separate alterations.
Usually, on a semi or end-terrace. The gable is built up off the flank, and the loft steelwork often bears on the party wall, so the Party Wall etc. Act applies and notice must be served before work starts — separately from Nottingham City Council's planning decision. We detail the junction on the drawings and flag the notice early so a surveyor can be appointed without delay. This applies to your Basford address specifically.
We price each Basford hip-to-gable individually, because the roof geometry and whether it is one gable or two vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack — usually gable plus rear dormer — with free revisions until Nottingham City Council approves. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.