Single-storey, double-storey, rear and side extension drawings for Hove homes — measured to Brighton & Hove City Council's design guidance, delivered in days and revised free until your decision, with a free approval-odds check before you commit.
Brighton & Hove City Council granted 89% of the householder planning decisions it made in its latest published year — 2 points above the 87% England-wide householder average. The Regency and early-Victorian stucco frontages of Brunswick and the seafront squares are protected in fine grain, down to render lines, railings and glazing, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837), Victorian (1837–1901), Edwardian (1901–1910) and interwar (1918–1939) housing stock sets the design brief on most streets.
Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Brighton & Hove City Council needs a full application. Hove carries at least one Article 4 direction, and conservation areas including Old Hove, Brunswick Town and The Avenues remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Hove is determined against an 8-week statutory target.
Brunswick Town (Charles Busby's grand twin-terrace Regency estate off the seafront), The Avenues (wide Victorian streets of 1871–1901 villas between Church Road and the sea), Cliftonville (mid-Victorian Italianate villas and large Tudorbethan houses), Old Hove (the early stucco terraces around Brunswick and Adelaide Crescent), Poets' Corner (dense late-Victorian bay-fronted terraces north of Portland Road) and West Blatchington (interwar semi-detached suburbia on the downland fringe) — these are the Hove pockets our drawings cover most. Heritage designations here include Old Hove, Brunswick Town, The Avenues, Cliftonville, The Willett Estate and Sackville Gardens. Brighton & Hove City Council weighs each proposal against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, where seafront and set-piece square frontages attract the city's tightest design scrutiny, so alterations are kept behind the historic building line. Much of Brunswick Town, Old Hove and the Avenues is subdivided into flats and maisonettes, which carry no householder permitted-development rights of their own.. On roofs the borough is butterfly and valley roofs concealed behind the terrace parapets, mansard roofs on the taller stucco streets and hipped roofs on the interwar and villa stock, over Regency stucco terraces and set-piece squares, Victorian and Edwardian bay-fronted terraces, Italianate and Tudorbethan villas and interwar semi-detached houses.
Hove homes come in a handful of recurring shapes, and each one points to a different extension. The borough is built largely from Regency stucco terraces and set-piece squares, Victorian and Edwardian bay-fronted terraces, Italianate and Tudorbethan villas and interwar semi-detached houses, so a Victorian terrace usually wants a rear or side-return infill, while an interwar semi has room for a wider single-storey wrap or a two-storey side addition. Brighton & Hove City Council judges every one of them against Brighton & Hove City Plan (Parts One 2016 and Two 2022) and the relevant SPDs, weighing footprint, height and the impact on the house next door before it looks at the elevations.
That is why the drawings decide the outcome. We set the extension depth against the permitted-development limits precisely, keep the eaves and ridge within the allowances, and plot the 45-degree daylight lines to the neighbours' windows so the case officer can see the amenity test is passed. The Regency and early-Victorian stucco frontages of Brunswick and the seafront squares are protected in fine grain, down to render lines, railings and glazing, so we design around it from the first sketch rather than discover it at validation.
Hove also protects whole streets — Old Hove, Brunswick Town, The Avenues, Cliftonville, The Willett Estate and Sackville Gardens among them. Hove sits inside Brighton & Hove's city-wide Article 4 direction for small houses in multiple occupation, and separate conservation-area Article 4s in the Brunswick Town and Avenues estates remove permitted-development rights for works — from windows to front boundary walls — that would be automatic on an unprotected street. On designated land the larger-home extension route and most side extensions stop being permitted development, so we confirm your address against those layers before drawing a line.
Plenty of Hove extensions are permitted development and need no planning application — a single-storey rear extension within the depth and height limits is the common case. You will normally need to apply to Brighton & Hove City Council if any of these apply:
We draw the footprint, the ridge and eaves heights and the neighbours' daylight on the page — the relationships Brighton & Hove City Council's officers weigh first — and submit a validation-complete pack, whether that is a lawful development certificate, a prior-approval notification or a full householder application.
Below is Brighton & Hove City Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Brighton & Hove grants the large majority of householder applications city-wide, but in Hove the Regency conservation coverage and the protected seafront squares set close limits on what roofs, windows and front alterations can do. A complete, policy-literate extension pack anticipates those pressure points before submission, which is why professionally drawn applications are decided faster and refused less often than DIY ones.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Brunswick Town, The Avenues and Cliftonville, the extension that lands most often is the single-storey rear addition — a glazed kitchen-diner across the back of the house, kept within the permitted-development depth or taken to a full application where the ground floor wants more. On the borough's regency stucco terraces and set-piece squares, a side-return infill frequently pairs with it to square off the plan; on wider interwar semi-detached houses, a two-storey side or rear extension can add a bedroom above without swallowing the garden.
Seafront and set-piece square frontages attract the city's tightest design scrutiny, so alterations are kept behind the historic building line. We size the extension to the amenity and daylight tests, match the roof and materials to the host house, and keep enough garden to satisfy Brighton & Hove City Council's space standards — so the scheme answers the borough's questions before an objection can raise them. Where permitted-development rights are used up or removed, we prepare the householder application to the council's extension design guidance instead.
We draw extensions on every street in the borough. A few of the neighbourhoods where Hove projects come up most often:
Extension drawings for Brunswick Town's Charles Busby's grand twin-terrace Regency estate off the seafront — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
Extension drawings for The Avenues's wide Victorian streets of 1871–1901 villas between Church Road and the sea — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
Extension drawings for Cliftonville's mid-Victorian Italianate villas and large Tudorbethan houses — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
Extension drawings for Old Hove's the early stucco terraces around Brunswick and Adelaide Crescent — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
Extension drawings for Poets' Corner's dense late-Victorian bay-fronted terraces north of Portland Road — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
Extension drawings for West Blatchington's interwar semi-detached suburbia on the downland fringe — footprint-checked, daylight-tested and drawn to Brighton & Hove City Council's guidance.
The right extension in Hove depends on your house type and how much garden you can give up. This is how the main options compare on planning route and what they add.
| Extension type | Permitted development? | What it adds | What Brighton & Hove City Council checks |
|---|---|---|---|
| Single-storey rear | Often, within 3m/4m depth (6m/8m via prior approval) | Bigger kitchen-diner across the back | Depth, height, neighbour daylight (45°) |
| Side-return infill | Sometimes, if within width and height limits | Squares off an L-shaped ground floor | Width vs the original house, glazing to boundary |
| Two-storey rear/side | No — full application | Extra bedroom or bathroom above | Bulk, overlooking, 7m rear-boundary gap |
| Wraparound (rear + side) | No — full application | Whole-width open-plan ground floor | Combined footprint and garden retained |
Route depends on your street — conservation areas such as Old Hove and Brunswick Town and Article 4 directions can remove permitted-development rights.
A fixed process built around how Brighton & Hove City Council validates and decides householder extension applications — most drawings are submission-ready within seven days of survey.
Tell us your Hove postcode and house type. We confirm your conservation and Article 4 status, how much permitted-development depth you have left, and score your odds against live Brighton & Hove City Council decisions.
We measure the existing footprint, floor and eaves levels, boundary distances and the neighbours' window positions — the numbers the depth limits and daylight tests depend on.
Chartered designers develop the single-storey, two-storey or side extension to your brief, drawn inside the permitted-development limits or to Brighton & Hove City Council's extension design guidance.
We submit the certificate, prior-approval notice or application, manage validation and case-officer queries, and revise the drawings free until Brighton & Hove City Council issues its decision.
Not always. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development. In Hove you will need to apply to Brighton & Hove City Council for two-storey extensions, side extensions wider than half the house, anything forward of the front wall, deeper rear extensions under the larger-home prior-approval route, and any extension in a conservation area such as Old Hove and Brunswick Town.
Standard permitted development allows 3 metres on a terraced or semi-detached house and 4 metres on a detached one. The larger-home extension scheme can double that to 6 or 8 metres, but it needs a prior-approval notification to Brighton & Hove City Council and a neighbour-consultation period, and it does not apply on designated land such as Hove's conservation areas. We confirm which route your property qualifies for before drawing.
Two-storey and double-storey extensions almost always need a full householder application to Brighton & Hove City Council, because they fall outside permitted development on most homes. The council looks closely at bulk, overlooking of neighbours and the 7-metre gap a two-storey rear extension must keep from the rear boundary. We design to those tests and show the daylight and privacy angles on the drawings.
A householder planning application in Hove runs to a statutory eight-week target, a larger-home prior-approval notification to around six weeks including the neighbour-consultation period, and a lawful development certificate to eight weeks. Incomplete submissions stall at validation, so we submit a complete pack and manage officer queries to keep the decision on schedule. Brighton & Hove City Council is the decision-maker.
Yes — planning permission and building regulations are separate consents, and almost every extension needs both. Planning governs whether you can build it; building control governs how it is built, covering structure, insulation, drainage and fire safety. We prepare the building-regulations drawings alongside the planning set so Brighton & Hove City Council's building control or an approved inspector can sign the work off.
Every house and brief is different, so we price each Hove extension individually and send a fixed, no-obligation quote back within one working day. It covers the full drawing pack with free revisions until Brighton & Hove City Council approves, and we tell you upfront whether your extension qualifies as permitted development. Call 020 7864 7245 to get started.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.