Single-storey, double-storey, rear and side extension drawings for Friar Gate homes — measured to Derby City Council's design guidance, delivered in days and revised free until your decision, with a free approval-odds check before you commit.
Derby City Council granted 93% of the householder planning decisions it made in its latest published year — 6 points above the 87% England-wide householder average. Georgian frontages, railings and window proportions on Friar Gate are held to conservation-area detail, so replacement joinery and roof additions are scrutinised closely, which is where a policy-literate drawing pack earns its keep. Its dominant Georgian (1714–1837) and Victorian (1837–1901) housing stock sets the design brief on most streets.
Class A and Class B set the thresholds — a rear dormer to 40m³ on a terrace or 50m³ on a semi or detached, and a single-storey rear extension to 3m on a terrace or 4m on a detached house — beyond which Derby City Council needs a full application. Friar Gate carries at least one Article 4 direction, and conservation areas including Friar Gate, City Centre and Railway remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Friar Gate is determined against an 8-week statutory target.
Friar Gate (one of the finest Georgian streets in the Midlands, lined with brick townhouses and professional offices), Cathedral Quarter (the historic city-centre core around Derby Cathedral and Iron Gate), The Wardwick (Victorian civic and commercial frontages close to Friar Gate), Vernon Street (a formal Georgian-Regency terrace beside the old county gaol), Ashbourne Road (Victorian townhouses and terraces running west from Friar Gate) and Bridge Street (mixed period terraces linking the centre to the Strutts Park corridor) — these are the Friar Gate pockets our drawings cover most. Heritage designations here include Friar Gate, City Centre and Railway. Derby City Council weighs each proposal against the Derby City Local Plan Part 1 (Core Strategy) and Part 2, where many townhouses are already in office or flat use, so change-of-use and subdivision schemes must satisfy amenity, refuse and cycle-storage policy. Many Friar Gate and city-centre townhouses have been converted to flats or offices, and converted flats carry no householder permitted-development rights.. On roofs the borough is parapet-concealed and shallow pitched roofs on the Georgian townhouses and gabled and hipped slate roofs on the Victorian terraces, over Georgian and early-Victorian brick townhouses along Friar Gate, Victorian terraces around the city centre and converted period offices and townhouses split into flats and apartments.
Friar Gate homes come in a handful of recurring shapes, and each one points to a different extension. The borough is built largely from Georgian and early-Victorian brick townhouses along Friar Gate, Victorian terraces around the city centre and converted period offices and townhouses split into flats and apartments, so a Victorian terrace usually wants a rear or side-return infill, while an interwar semi has room for a wider single-storey wrap or a two-storey side addition. Derby City Council judges every one of them against the Derby City Local Plan Part 1 (Core Strategy) and Part 2, weighing footprint, height and the impact on the house next door before it looks at the elevations.
That is why the drawings decide the outcome. We set the extension depth against the permitted-development limits precisely, keep the eaves and ridge within the allowances, and plot the 45-degree daylight lines to the neighbours' windows so the case officer can see the amenity test is passed. Georgian frontages, railings and window proportions on Friar Gate are held to conservation-area detail, so replacement joinery and roof additions are scrutinised closely, so we design around it from the first sketch rather than discover it at validation.
Friar Gate also protects whole streets — Friar Gate, City Centre and Railway among them. Friar Gate sits inside the Ring Road within Abbey Ward, so Derby's HMO Article 4 direction (in force from 3 May 2025) removes the permitted right to convert family homes to small shared houses, and the Friar Gate conservation area layers further control over its Georgian frontages. On designated land the larger-home extension route and most side extensions stop being permitted development, so we confirm your address against those layers before drawing a line.
Plenty of Friar Gate extensions are permitted development and need no planning application — a single-storey rear extension within the depth and height limits is the common case. You will normally need to apply to Derby City Council if any of these apply:
We draw the footprint, the ridge and eaves heights and the neighbours' daylight on the page — the relationships Derby City Council's officers weigh first — and submit a validation-complete pack, whether that is a lawful development certificate, a prior-approval notification or a full householder application.
Below is Derby City Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Derby City Council approves the large majority of applications it decides, and in Friar Gate the recurring pressure points are conservation-area detailing and the HMO Article 4 controls on subdivision. A complete, policy-literate extension pack anticipates those pressure points before submission, which is why professionally drawn applications are decided faster and refused less often than DIY ones.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Friar Gate, Cathedral Quarter and The Wardwick, the extension that lands most often is the single-storey rear addition — a glazed kitchen-diner across the back of the house, kept within the permitted-development depth or taken to a full application where the ground floor wants more. On the borough's georgian and early-victorian brick townhouses along friar gate, a side-return infill frequently pairs with it to square off the plan; on wider converted period offices and townhouses split into flats and apartments, a two-storey side or rear extension can add a bedroom above without swallowing the garden.
Many townhouses are already in office or flat use, so change-of-use and subdivision schemes must satisfy amenity, refuse and cycle-storage policy. We size the extension to the amenity and daylight tests, match the roof and materials to the host house, and keep enough garden to satisfy Derby City Council's space standards — so the scheme answers the borough's questions before an objection can raise them. Where permitted-development rights are used up or removed, we prepare the householder application to the council's extension design guidance instead.
We draw extensions on every street in the borough. A few of the neighbourhoods where Friar Gate projects come up most often:
Extension drawings for Friar Gate's one of the finest Georgian streets in the Midlands, lined with brick townhouses and professional offices — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
Extension drawings for Cathedral Quarter's the historic city-centre core around Derby Cathedral and Iron Gate — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
Extension drawings for The Wardwick's Victorian civic and commercial frontages close to Friar Gate — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
Extension drawings for Vernon Street's a formal Georgian-Regency terrace beside the old county gaol — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
Extension drawings for Ashbourne Road's Victorian townhouses and terraces running west from Friar Gate — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
Extension drawings for Bridge Street's mixed period terraces linking the centre to the Strutts Park corridor — footprint-checked, daylight-tested and drawn to Derby City Council's guidance.
The right extension in Friar Gate depends on your house type and how much garden you can give up. This is how the main options compare on planning route and what they add.
| Extension type | Permitted development? | What it adds | What Derby City Council checks |
|---|---|---|---|
| Single-storey rear | Often, within 3m/4m depth (6m/8m via prior approval) | Bigger kitchen-diner across the back | Depth, height, neighbour daylight (45°) |
| Side-return infill | Sometimes, if within width and height limits | Squares off an L-shaped ground floor | Width vs the original house, glazing to boundary |
| Two-storey rear/side | No — full application | Extra bedroom or bathroom above | Bulk, overlooking, 7m rear-boundary gap |
| Wraparound (rear + side) | No — full application | Whole-width open-plan ground floor | Combined footprint and garden retained |
Route depends on your street — conservation areas such as Friar Gate and City Centre and Article 4 directions can remove permitted-development rights.
A fixed process built around how Derby City Council validates and decides householder extension applications — most drawings are submission-ready within seven days of survey.
Tell us your Friar Gate postcode and house type. We confirm your conservation and Article 4 status, how much permitted-development depth you have left, and score your odds against live Derby City Council decisions.
We measure the existing footprint, floor and eaves levels, boundary distances and the neighbours' window positions — the numbers the depth limits and daylight tests depend on.
Chartered designers develop the single-storey, two-storey or side extension to your brief, drawn inside the permitted-development limits or to Derby City Council's extension design guidance.
We submit the certificate, prior-approval notice or application, manage validation and case-officer queries, and revise the drawings free until Derby City Council issues its decision.
Not always. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development. In Friar Gate you will need to apply to Derby City Council for two-storey extensions, side extensions wider than half the house, anything forward of the front wall, deeper rear extensions under the larger-home prior-approval route, and any extension in a conservation area such as Friar Gate and City Centre.
Standard permitted development allows 3 metres on a terraced or semi-detached house and 4 metres on a detached one. The larger-home extension scheme can double that to 6 or 8 metres, but it needs a prior-approval notification to Derby City Council and a neighbour-consultation period, and it does not apply on designated land such as Friar Gate's conservation areas. We confirm which route your property qualifies for before drawing.
Two-storey and double-storey extensions almost always need a full householder application to Derby City Council, because they fall outside permitted development on most homes. The council looks closely at bulk, overlooking of neighbours and the 7-metre gap a two-storey rear extension must keep from the rear boundary. We design to those tests and show the daylight and privacy angles on the drawings. This applies to your Friar Gate address specifically.
A householder planning application in Friar Gate runs to a statutory eight-week target, a larger-home prior-approval notification to around six weeks including the neighbour-consultation period, and a lawful development certificate to eight weeks. Incomplete submissions stall at validation, so we submit a complete pack and manage officer queries to keep the decision on schedule. Derby City Council is the decision-maker.
Yes — planning permission and building regulations are separate consents, and almost every extension needs both. Planning governs whether you can build it; building control governs how it is built, covering structure, insulation, drainage and fire safety. We prepare the building-regulations drawings alongside the planning set so Derby City Council's building control or an approved inspector can sign the work off. This applies to your Friar Gate address specifically.
Every house and brief is different, so we price each Friar Gate extension individually and send a fixed, no-obligation quote back within one working day. It covers the full drawing pack with free revisions until Derby City Council approves, and we tell you upfront whether your extension qualifies as permitted development. Call 020 7864 7245 to get started.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.