Single-storey, double-storey, rear and side extension drawings for Cottesmore homes — measured to Rutland County Council's design guidance, delivered in days and revised free until your decision, with a free approval-odds check before you commit.
Rutland County Council granted 92% of the householder planning decisions it made in its latest published year — 5 points above the 87% England-wide householder average. Cottesmore contains Cottesmore, Market Overton conservation areas (Cottesmore designated 1981), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Cottesmore and Market Overton those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Cottesmore is determined against an 8-week statutory target.
Cottesmore (conservation area designated in 1981), Market Overton (conservation area designated in 1981), Market Overton (civil parish within Cottesmore) and Barrow (civil parish within Cottesmore) — these are the Cottesmore pockets our drawings cover most. Heritage designations here include Cottesmore and Market Overton. Rutland County Council weighs each proposal against Rutland County Council's development plan and the design policies it applies to householder applications, where the 1,260 homes here are 38% 1955-1964, 16% 1965-1972, 15% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow gabled roofs typical of that period's building and shallow-pitched roofs and integral garages typical of that period's building, over late-1950s and early-1960s houses (38% of 1,260 homes), late-1960s and early-1970s houses (16%) and Victorian and earlier houses (15%).
What is permitted in Cottesmore turns on designation first, so that is where we start: Cottesmore (conservation area designated in 1981) and Market Overton (conservation area designated in 1981). Inside those boundaries permitted development is curtailed and Rutland County Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Cottesmore takes in Market Overton and Barrow. No Article 4 direction is recorded for Rutland County Council, but Cottesmore's 2 conservation areas still limit permitted development on those streets.
On stock, Cottesmore is late-1950s and early-1960s houses (38% of 1,260 homes), late-1960s and early-1970s houses (16%) and Victorian and earlier houses (15%) — which is why shallow gabled roofs typical of that period's building and shallow-pitched roofs and integral garages typical of that period's building govern what a loft or rear projection can realistically be. Rutland County Council decided 269 householder applications in the latest published year and granted 92%, with 74% issued inside the eight-week target. We draw to that record rather than to a national average.
The full build-period split for Cottesmore runs pre-1900 15% (190 homes), 1900-1918 2% (20 homes), 1930-1939 2% (20 homes), 1945-1954 3% (40 homes), 1955-1964 38% (480 homes), 1965-1972 16% (200 homes), 1973-1982 8% (100 homes), 1983-1992 3% (40 homes), 1993-1999 2% (20 homes) and 2000-2008 6% (80 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Rutland County Council also decides for Ketton, Normanton, Ryhall & Casterton and Uppingham, so a decision in Cottesmore sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Cottesmore and Rutland County Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Cottesmore |
|---|---|
| Dwellings recorded | 1,260 |
| Built pre-1900 | 190 (15%) |
| Built 1900-1918 | 20 (2%) |
| Built 1930-1939 | 20 (2%) |
| Built 1945-1954 | 40 (3%) |
| Built 1955-1964 | 480 (38%) |
| Built 1965-1972 | 200 (16%) |
| Built 1973-1982 | 100 (8%) |
| Built 1983-1992 | 40 (3%) |
| Built 1993-1999 | 20 (2%) |
| Built 2000-2008 | 80 (6%) |
| Built before 1919 | 17% |
| Built 1919–1939 | 2% |
| Built 1945–2008 | 76% |
| Conservation areas in Cottesmore | 2 (Cottesmore, Market Overton) |
| Conservation areas district-wide | 34 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 269 |
| Householder applications granted | 92% |
| Decided within 8 weeks | 74% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Rutland County Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Cottesmore homes come in a handful of recurring shapes, and each one points to a different extension. The borough is built largely from late-1950s and early-1960s houses (38% of 1,260 homes), late-1960s and early-1970s houses (16%) and Victorian and earlier houses (15%), so a Victorian terrace usually wants a rear or side-return infill, while an interwar semi has room for a wider single-storey wrap or a two-storey side addition. Rutland County Council judges every one of them against Rutland County Council's development plan and the design policies it applies to householder applications, weighing footprint, height and the impact on the house next door before it looks at the elevations.
That is why the drawings decide the outcome. We set the extension depth against the permitted-development limits precisely, keep the eaves and ridge within the allowances, and plot the 45-degree daylight lines to the neighbours' windows so the case officer can see the amenity test is passed. Cottesmore contains Cottesmore, Market Overton conservation areas (Cottesmore designated 1981), so materials, fenestration and roof form are assessed against the appraisal, so we design around it from the first sketch rather than discover it at validation.
Cottesmore also protects whole streets — Cottesmore and Market Overton among them. No Article 4 direction is recorded for Rutland County Council, but Cottesmore's 2 conservation areas still limit permitted development on those streets. On designated land the larger-home extension route and most side extensions stop being permitted development, so we confirm your address against those layers before drawing a line.
Plenty of Cottesmore extensions are permitted development and need no planning application — a single-storey rear extension within the depth and height limits is the common case. You will normally need to apply to Rutland County Council if any of these apply:
We draw the footprint, the ridge and eaves heights and the neighbours' daylight on the page — the relationships Rutland County Council's officers weigh first — and submit a validation-complete pack, whether that is a lawful development certificate, a prior-approval notification or a full householder application.
Below is Rutland County Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Rutland County Council granted 92% of its householder applications in the year to 31 March 2026, and Cottesmore shapes what is approved here. A complete, policy-literate extension pack anticipates those pressure points before submission, which is why professionally drawn applications are decided faster and refused less often than DIY ones.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Cottesmore, Market Overton and Market Overton, the extension that lands most often is the single-storey rear addition — a glazed kitchen-diner across the back of the house, kept within the permitted-development depth or taken to a full application where the ground floor wants more. On the borough's late-1950s and early-1960s houses (38% of 1,260 homes), a side-return infill frequently pairs with it to square off the plan; on wider victorian and earlier houses (15%), a two-storey side or rear extension can add a bedroom above without swallowing the garden.
The 1,260 homes here are 38% 1955-1964, 16% 1965-1972, 15% pre-1900, which is what sets the realistic roof and rear-projection options. We size the extension to the amenity and daylight tests, match the roof and materials to the host house, and keep enough garden to satisfy Rutland County Council's space standards — so the scheme answers the borough's questions before an objection can raise them. Where permitted-development rights are used up or removed, we prepare the householder application to the council's extension design guidance instead.
We draw extensions on every street in the borough. A few of the neighbourhoods where Cottesmore projects come up most often:
Extension drawings for Cottesmore's conservation area designated in 1981 — footprint-checked, daylight-tested and drawn to Rutland County Council's guidance.
Extension drawings for Market Overton's conservation area designated in 1981 — footprint-checked, daylight-tested and drawn to Rutland County Council's guidance.
Extension drawings for Market Overton's civil parish within Cottesmore — footprint-checked, daylight-tested and drawn to Rutland County Council's guidance.
Extension drawings for Barrow's civil parish within Cottesmore — footprint-checked, daylight-tested and drawn to Rutland County Council's guidance.
The right extension in Cottesmore depends on your house type and how much garden you can give up. This is how the main options compare on planning route and what they add.
| Extension type | Permitted development? | What it adds | What Rutland County Council checks |
|---|---|---|---|
| Single-storey rear | Often, within 3m/4m depth (6m/8m via prior approval) | Bigger kitchen-diner across the back | Depth, height, neighbour daylight (45°) |
| Side-return infill | Sometimes, if within width and height limits | Squares off an L-shaped ground floor | Width vs the original house, glazing to boundary |
| Two-storey rear/side | No — full application | Extra bedroom or bathroom above | Bulk, overlooking, 7m rear-boundary gap |
| Wraparound (rear + side) | No — full application | Whole-width open-plan ground floor | Combined footprint and garden retained |
Route depends on your street — conservation areas such as Cottesmore and Market Overton and Article 4 directions can remove permitted-development rights.
A fixed process built around how Rutland County Council validates and decides householder extension applications — most drawings are submission-ready within seven days of survey.
Tell us your Cottesmore postcode and house type. We confirm your conservation and Article 4 status, how much permitted-development depth you have left, and score your odds against live Rutland County Council decisions.
We measure the existing footprint, floor and eaves levels, boundary distances and the neighbours' window positions — the numbers the depth limits and daylight tests depend on.
Chartered designers develop the single-storey, two-storey or side extension to your brief, drawn inside the permitted-development limits or to Rutland County Council's extension design guidance.
We submit the certificate, prior-approval notice or application, manage validation and case-officer queries, and revise the drawings free until Rutland County Council issues its decision.
Not always. A single-storey rear extension up to 3 metres deep on a terrace or semi, or 4 metres on a detached house, and no higher than 4 metres, is usually permitted development. In Cottesmore you will need to apply to Rutland County Council for two-storey extensions, side extensions wider than half the house, anything forward of the front wall, deeper rear extensions under the larger-home prior-approval route, and any extension in a conservation area such as Cottesmore and Market Overton.
Standard permitted development allows 3 metres on a terraced or semi-detached house and 4 metres on a detached one. The larger-home extension scheme can double that to 6 or 8 metres, but it needs a prior-approval notification to Rutland County Council and a neighbour-consultation period, and it does not apply on designated land such as Cottesmore's conservation areas. We confirm which route your property qualifies for before drawing.
Two-storey and double-storey extensions almost always need a full householder application to Rutland County Council, because they fall outside permitted development on most homes. The council looks closely at bulk, overlooking of neighbours and the 7-metre gap a two-storey rear extension must keep from the rear boundary. We design to those tests and show the daylight and privacy angles on the drawings. This applies to your Cottesmore address specifically.
A householder planning application in Cottesmore runs to a statutory eight-week target, a larger-home prior-approval notification to around six weeks including the neighbour-consultation period, and a lawful development certificate to eight weeks. Incomplete submissions stall at validation, so we submit a complete pack and manage officer queries to keep the decision on schedule. Rutland County Council is the decision-maker.
Yes — planning permission and building regulations are separate consents, and almost every extension needs both. Planning governs whether you can build it; building control governs how it is built, covering structure, insulation, drainage and fire safety. We prepare the building-regulations drawings alongside the planning set so Rutland County Council's building control or an approved inspector can sign the work off. This applies to your Cottesmore address specifically.
Every house and brief is different, so we price each Cottesmore extension individually and send a fixed, no-obligation quote back within one working day. It covers the full drawing pack with free revisions until Rutland County Council approves, and we tell you upfront whether your extension qualifies as permitted development. Call 020 7864 7245 to get started.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.