Rear dormer drawings for Loose & Linton roofs — the box across the back slope that turns a low attic into a full-height room, drawn to Maidstone Borough Council's guidance and the volume limits, delivered in days and revised free until your decision, with a free approval-odds check first.
Maidstone Borough Council granted 91% of the householder planning decisions it made in its latest published year — 4 points above the 87% England-wide householder average. Loose & Linton contains Linton, Loose Valley conservation areas (Linton designated 1974), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. Loose & Linton carries at least one Article 4 direction, and conservation areas including Linton and Loose Valley remove those rights outright, so we confirm your exact address before a line is drawn. A validated householder application in Loose & Linton is determined against an 8-week statutory target.
Linton (conservation area designated in 1974), Loose Valley (conservation area designated in 2000), Linton (civil parish within Loose & Linton), Boughton Monchelsea (civil parish within Loose & Linton) and Loose (civil parish within Loose & Linton) — these are the Loose & Linton pockets our drawings cover most. Heritage designations here include Linton and Loose Valley. Maidstone Borough Council weighs each proposal against Maidstone Borough Council's adopted local plan and its householder design guidance, where the 4,220 homes here are 23% 1955-1964, 15% pre-1900, 11% 1965-1972, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow gabled roofs typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over late-1950s and early-1960s houses (23% of 4,220 homes), Victorian and earlier houses (15%) and late-1960s and early-1970s houses (11%).
What is permitted in Loose & Linton turns on designation first, so that is where we start: Linton (conservation area designated in 1974) and Loose Valley (conservation area designated in 2000). Inside those boundaries permitted development is curtailed and Maidstone Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Loose & Linton takes in Linton, Boughton Monchelsea and Loose. Maidstone Borough Council has 84 recorded Article 4 directions — check the address before assuming PD applies in Loose & Linton.
On stock, Loose & Linton is late-1950s and early-1960s houses (23% of 4,220 homes), Victorian and earlier houses (15%) and late-1960s and early-1970s houses (11%) — which is why shallow gabled roofs typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Maidstone Borough Council decided 536 householder applications in the latest published year and granted 91%, with 81% issued inside the eight-week target. We draw to that record rather than to a national average.
The full build-period split for Loose & Linton runs pre-1900 15% (640 homes), 1900-1918 2% (90 homes), 1919-1929 5% (230 homes), 1930-1939 9% (390 homes), 1945-1954 1% (60 homes), 1955-1964 23% (990 homes), 1965-1972 11% (460 homes), 1973-1982 6% (270 homes), 1983-1992 2% (100 homes), 1993-1999 2% (70 homes) and 2000-2008 8% (340 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Maidstone Borough Council also decides for Barming Heath & Teston, Bearsted & Downswood, Boxley Downs, Coxheath & Farleigh, High Street, Leeds & Langley, Marden & Yalding and Staplehurst, so a decision in Loose & Linton sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
The Article 4 directions recorded for this council include 29 Albion Place, 62 Earl Street, 66 Earl Street and 70-72 King Street,. Each removes a specific permitted-development right inside its own boundary, which is why the check is done on the address rather than on the town.
Published figures for Loose & Linton and Maidstone Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Loose & Linton |
|---|---|
| Dwellings recorded | 4,220 |
| Built pre-1900 | 640 (15%) |
| Built 1900-1918 | 90 (2%) |
| Built 1919-1929 | 230 (5%) |
| Built 1930-1939 | 390 (9%) |
| Built 1945-1954 | 60 (1%) |
| Built 1955-1964 | 990 (23%) |
| Built 1965-1972 | 460 (11%) |
| Built 1973-1982 | 270 (6%) |
| Built 1983-1992 | 100 (2%) |
| Built 1993-1999 | 70 (2%) |
| Built 2000-2008 | 340 (8%) |
| Built before 1919 | 17% |
| Built 1919–1939 | 15% |
| Built 1945–2008 | 54% |
| Conservation areas in Loose & Linton | 2 (Linton, Loose Valley) |
| Conservation areas district-wide | 53 |
| Article 4 directions recorded | 84 |
| Householder applications decided | 536 |
| Householder applications granted | 91% |
| Decided within 8 weeks | 81% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Maidstone Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The box dormer is the workhorse loft, and most of Loose & Linton is built for it — the borough runs to late-1950s and early-1960s houses (23% of 4,220 homes), Victorian and earlier houses (15%) and late-1960s and early-1970s houses (11%) under shallow gabled roofs typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, and a flat-roofed box across the rear slope is the cheapest cubic metre of full-height space those roofs give up. Maidstone Borough Council tests the dormer against Maidstone Borough Council's adopted local plan and its householder design guidance, and because permitted development turns on a number, the volume you propose against the volume you have left is the first thing an officer or a certificate checks.
That is why the arithmetic goes on the drawings. We calculate the box against the 40- or 50-cubic-metre allowance, count any earlier roof enlargement into the total, hold the flat roof below the ridge and set the face back off the eaves so the dormer reads as subordinate. Loose & Linton contains Linton, Loose Valley conservation areas (Linton designated 1974), so materials, fenestration and roof form are assessed against the appraisal, so the cheeks, the window line and the material are drawn to answer it rather than invite a query.
Where Loose & Linton's streets are protected — Linton and Loose Valley among them — the Class B dormer right is switched off and even a modest rear box needs consent. Maidstone Borough Council has 84 recorded Article 4 directions — check the address before assuming PD applies in Loose & Linton. We confirm the designation before the box is sized.
Many rear dormers in Loose & Linton are permitted development, but the volume and position decide it. You will normally need a full application to Maidstone Borough Council if any of these apply:
We draw the box within its volume allowance, the flat roof below the ridge and the face set back off the eaves — the three things a dormer stands or falls on — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Maidstone Borough Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Maidstone Borough Council granted 91% of its householder applications in the year to 31 March 2026, and Linton shapes what is approved here. A dormer is decided on volume and set-back, so a pack that shows the calculation and the eaves detail is cleared faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Linton, Loose Valley and Linton, the dormer that goes through is the subordinate rear box: flat roof kept low, cheeks clad to recede, side windows obscure-glazed against overlooking, and the whole thing set back so the original eaves line still reads from the garden. On shallow gabled roofs typical of that period's building, this returns a full-height double and en-suite from what was standing-room-only, usually inside the permitted-development volume.
The 4,220 homes here are 23% 1955-1964, 15% pre-1900, 11% 1965-1972, which is what sets the realistic roof and rear-projection options. We keep the box off the ridge, match the cheek material to the roof, and where the volume is already spent — or the street is designated — draw the dormer as a householder application composed to Maidstone Borough Council's roof-alteration guidance rather than push a certificate that would be refused.
We draw rear dormers on the terraced and semi-detached streets across the borough. A few of the neighbourhoods where Loose & Linton dormers come up most often:
Dormer loft drawings for Linton's conservation area designated in 1974 — volume-checked, set-back-detailed and drawn to Maidstone Borough Council's guidance.
Dormer loft drawings for Loose Valley's conservation area designated in 2000 — volume-checked, set-back-detailed and drawn to Maidstone Borough Council's guidance.
Dormer loft drawings for Linton's civil parish within Loose & Linton — volume-checked, set-back-detailed and drawn to Maidstone Borough Council's guidance.
Dormer loft drawings for Boughton Monchelsea's civil parish within Loose & Linton — volume-checked, set-back-detailed and drawn to Maidstone Borough Council's guidance.
Dormer loft drawings for Loose's civil parish within Loose & Linton — volume-checked, set-back-detailed and drawn to Maidstone Borough Council's guidance.
Whether a dormer in Loose & Linton needs permission comes down to where it sits and how big the box is. This is how the cases compare.
| Dormer type | Permitted development? | What it gains | What Maidstone Borough Council checks |
|---|---|---|---|
| Rear box, within volume | Usually yes | Full-height room across the back | Volume total, 20cm eaves set-back |
| Rear box, over volume limit | No — full application | A larger room | How far over the allowance, bulk |
| Front or side dormer | No — full application | Light to the front rooms | Visibility from the street, character |
| Dormer in a conservation area | No — full application | Same space, extra scrutiny | Roof form and street appearance |
In conservation areas such as Linton and Loose Valley, Class B dormer rights are removed and every dormer needs a full application.
A fixed process built around how Maidstone Borough Council validates and decides dormer applications — most drawings are submission-ready within seven days of survey.
Send us your Loose & Linton postcode and roof type. We confirm your conservation and Article 4 status, work out how much permitted-development volume you have left, and score your odds against live Maidstone Borough Council decisions.
We measure ridge and eaves heights, roof pitch and the existing loft floor — the numbers the volume calculation, the set-back and the head heights depend on.
Chartered designers develop the box to your brief, drawn inside the Class B volume limits or, where those are exhausted or removed, to Maidstone Borough Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Maidstone Borough Council issues its decision.
Often not. A rear box dormer within 40 cubic metres on a terrace, or 50 on a semi or detached house, set back at least 20 centimetres from the eaves and kept below the ridge, is usually permitted development. In Loose & Linton you will need a full application to Maidstone Borough Council for a front or side dormer, a box that exceeds the volume, and any dormer in a conservation area such as Linton and Loose Valley, where those rights are removed.
The permitted-development limit is a volume, not a footprint: 40 cubic metres of added roof space on a terraced house and 50 on a semi-detached or detached one, and any earlier loft enlargement counts against that total. In Loose & Linton the box must also sit below the ridge and back from the eaves. We measure your roof and calculate the exact volume you have left before drawing. Maidstone Borough Council is the decision-maker.
Not under permitted development. A dormer on the front roof slope, or one facing a highway, always needs a full application to Maidstone Borough Council, because it changes how the house reads from the street. Rear box dormers are far more likely to be approved — or to be permitted development outright — which is why almost every Loose & Linton dormer we draw sits on the back slope.
Often, on a terrace or semi. If the dormer or the loft steelwork meets the party wall with your neighbour, the Party Wall etc. Act applies and notice must be served before work starts — separately from Maidstone Borough Council's planning decision. We flag the party-wall junction on the drawings so a surveyor can be appointed early and the build is not held up. This applies to your Loose & Linton address specifically.
If your dormer is permitted development, a lawful development certificate from Maidstone Borough Council is council-stamped proof of it — worth holding, because a buyer's solicitor will ask for it when you sell. We prepare and submit the certificate with the same measured drawing pack that shows the box within its volume allowance. This applies to your Loose & Linton address specifically.
We price each Loose & Linton dormer individually, because the roof pitch and the volume left vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Maidstone Borough Council approves, and we confirm at the outset whether your box is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.