Rear dormer drawings for Holmer roofs — the box across the back slope that turns a low attic into a full-height room, drawn to Herefordshire Council's guidance and the volume limits, delivered in days and revised free until your decision, with a free approval-odds check first.
Herefordshire Council granted 95% of the householder planning decisions it made in its latest published year — 8 points above the 87% England-wide householder average. Holmer contains the Aylestone Hill conservation area (Aylestone Hill designated 1969), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as Aylestone Hill those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Holmer is determined against an 8-week statutory target.
Aylestone Hill (conservation area designated in 1969), Holmer & Shelwick (civil parish within Holmer) and Hereford (civil parish within Holmer) — these are the Holmer pockets our drawings cover most. Heritage designations here include Aylestone Hill. Herefordshire Council weighs each proposal against Herefordshire Council's development plan and the design policies it applies to householder applications, where the 2,320 homes here are 13% 1955-1964, 10% 1983-1992, 9% pre-1900, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow gabled roofs typical of that period's building and trussed-rafter roofs typical of 1980s building, over late-1950s and early-1960s houses (13% of 2,320 homes), 1980s estate houses (10%) and Victorian and earlier houses (9%).
Before anything is drawn we check your address against the designations that apply in Holmer: Aylestone Hill (conservation area designated in 1969). Inside those boundaries permitted development is curtailed and Herefordshire Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Holmer takes in Holmer & Shelwick and Hereford. No Article 4 direction is recorded for Herefordshire Council, but Holmer's 1 conservation area still limit permitted development on those streets.
On stock, Holmer is late-1950s and early-1960s houses (13% of 2,320 homes), 1980s estate houses (10%) and Victorian and earlier houses (9%) — which is why shallow gabled roofs typical of that period's building and trussed-rafter roofs typical of 1980s building govern what a loft or rear projection can realistically be. Herefordshire Council decided 524 householder applications in the latest published year and granted 95%, with 46% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Holmer runs pre-1900 9% (200 homes), 1900-1918 1% (20 homes), 1919-1929 1% (30 homes), 1930-1939 4% (100 homes), 1945-1954 3% (80 homes), 1955-1964 13% (300 homes), 1965-1972 3% (70 homes), 1973-1982 3% (60 homes), 1983-1992 10% (240 homes), 1993-1999 6% (150 homes) and 2000-2008 2% (50 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Herefordshire Council also decides for Arrow, Backbury, Birch, Bircher, Castle, Dinedor Hill, Eign Hill and Hagley, so a decision in Holmer sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Holmer and Herefordshire Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Holmer |
|---|---|
| Dwellings recorded | 2,320 |
| Built pre-1900 | 200 (9%) |
| Built 1900-1918 | 20 (1%) |
| Built 1919-1929 | 30 (1%) |
| Built 1930-1939 | 100 (4%) |
| Built 1945-1954 | 80 (3%) |
| Built 1955-1964 | 300 (13%) |
| Built 1965-1972 | 70 (3%) |
| Built 1973-1982 | 60 (3%) |
| Built 1983-1992 | 240 (10%) |
| Built 1993-1999 | 150 (6%) |
| Built 2000-2008 | 50 (2%) |
| Built before 1919 | 9% |
| Built 1919–1939 | 6% |
| Built 1945–2008 | 41% |
| Conservation areas in Holmer | 1 (Aylestone Hill) |
| Conservation areas district-wide | 64 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 524 |
| Householder applications granted | 95% |
| Decided within 8 weeks | 46% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Herefordshire Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The box dormer is the workhorse loft, and most of Holmer is built for it — the borough runs to late-1950s and early-1960s houses (13% of 2,320 homes), 1980s estate houses (10%) and Victorian and earlier houses (9%) under shallow gabled roofs typical of that period's building and trussed-rafter roofs typical of 1980s building, and a flat-roofed box across the rear slope is the cheapest cubic metre of full-height space those roofs give up. Herefordshire Council tests the dormer against Herefordshire Council's development plan and the design policies it applies to householder applications, and because permitted development turns on a number, the volume you propose against the volume you have left is the first thing an officer or a certificate checks.
That is why the arithmetic goes on the drawings. We calculate the box against the 40- or 50-cubic-metre allowance, count any earlier roof enlargement into the total, hold the flat roof below the ridge and set the face back off the eaves so the dormer reads as subordinate. Holmer contains the Aylestone Hill conservation area (Aylestone Hill designated 1969), so materials, fenestration and roof form are assessed against the appraisal, so the cheeks, the window line and the material are drawn to answer it rather than invite a query.
Where Holmer's streets are protected — Aylestone Hill among them — the Class B dormer right is switched off and even a modest rear box needs consent. No Article 4 direction is recorded for Herefordshire Council, but Holmer's 1 conservation area still limit permitted development on those streets. We confirm the designation before the box is sized.
Many rear dormers in Holmer are permitted development, but the volume and position decide it. You will normally need a full application to Herefordshire Council if any of these apply:
We draw the box within its volume allowance, the flat roof below the ridge and the face set back off the eaves — the three things a dormer stands or falls on — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Herefordshire Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Herefordshire Council granted 95% of its householder applications in the year to 31 March 2026, and Aylestone Hill shapes what is approved here. A dormer is decided on volume and set-back, so a pack that shows the calculation and the eaves detail is cleared faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Aylestone Hill, Holmer & Shelwick and Hereford, the dormer that goes through is the subordinate rear box: flat roof kept low, cheeks clad to recede, side windows obscure-glazed against overlooking, and the whole thing set back so the original eaves line still reads from the garden. On shallow gabled roofs typical of that period's building, this returns a full-height double and en-suite from what was standing-room-only, usually inside the permitted-development volume.
The 2,320 homes here are 13% 1955-1964, 10% 1983-1992, 9% pre-1900, which is what sets the realistic roof and rear-projection options. We keep the box off the ridge, match the cheek material to the roof, and where the volume is already spent — or the street is designated — draw the dormer as a householder application composed to Herefordshire Council's roof-alteration guidance rather than push a certificate that would be refused.
We draw rear dormers on the terraced and semi-detached streets across the borough. A few of the neighbourhoods where Holmer dormers come up most often:
Dormer loft drawings for Aylestone Hill's conservation area designated in 1969 — volume-checked, set-back-detailed and drawn to Herefordshire Council's guidance.
Dormer loft drawings for Holmer & Shelwick's civil parish within Holmer — volume-checked, set-back-detailed and drawn to Herefordshire Council's guidance.
Dormer loft drawings for Hereford's civil parish within Holmer — volume-checked, set-back-detailed and drawn to Herefordshire Council's guidance.
Whether a dormer in Holmer needs permission comes down to where it sits and how big the box is. This is how the cases compare.
| Dormer type | Permitted development? | What it gains | What Herefordshire Council checks |
|---|---|---|---|
| Rear box, within volume | Usually yes | Full-height room across the back | Volume total, 20cm eaves set-back |
| Rear box, over volume limit | No — full application | A larger room | How far over the allowance, bulk |
| Front or side dormer | No — full application | Light to the front rooms | Visibility from the street, character |
| Dormer in a conservation area | No — full application | Same space, extra scrutiny | Roof form and street appearance |
In conservation areas such as Aylestone Hill, Class B dormer rights are removed and every dormer needs a full application.
A fixed process built around how Herefordshire Council validates and decides dormer applications — most drawings are submission-ready within seven days of survey.
Send us your Holmer postcode and roof type. We confirm your conservation and Article 4 status, work out how much permitted-development volume you have left, and score your odds against live Herefordshire Council decisions.
We measure ridge and eaves heights, roof pitch and the existing loft floor — the numbers the volume calculation, the set-back and the head heights depend on.
Chartered designers develop the box to your brief, drawn inside the Class B volume limits or, where those are exhausted or removed, to Herefordshire Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Herefordshire Council issues its decision.
Often not. A rear box dormer within 40 cubic metres on a terrace, or 50 on a semi or detached house, set back at least 20 centimetres from the eaves and kept below the ridge, is usually permitted development. In Holmer you will need a full application to Herefordshire Council for a front or side dormer, a box that exceeds the volume, and any dormer in a conservation area such as Aylestone Hill, where those rights are removed.
The permitted-development limit is a volume, not a footprint: 40 cubic metres of added roof space on a terraced house and 50 on a semi-detached or detached one, and any earlier loft enlargement counts against that total. In Holmer the box must also sit below the ridge and back from the eaves. We measure your roof and calculate the exact volume you have left before drawing. Herefordshire Council is the decision-maker.
Not under permitted development. A dormer on the front roof slope, or one facing a highway, always needs a full application to Herefordshire Council, because it changes how the house reads from the street. Rear box dormers are far more likely to be approved — or to be permitted development outright — which is why almost every Holmer dormer we draw sits on the back slope.
Often, on a terrace or semi. If the dormer or the loft steelwork meets the party wall with your neighbour, the Party Wall etc. Act applies and notice must be served before work starts — separately from Herefordshire Council's planning decision. We flag the party-wall junction on the drawings so a surveyor can be appointed early and the build is not held up. This applies to your Holmer address specifically.
If your dormer is permitted development, a lawful development certificate from Herefordshire Council is council-stamped proof of it — worth holding, because a buyer's solicitor will ask for it when you sell. We prepare and submit the certificate with the same measured drawing pack that shows the box within its volume allowance. This applies to your Holmer address specifically.
We price each Holmer dormer individually, because the roof pitch and the volume left vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Herefordshire Council approves, and we confirm at the outset whether your box is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.