Rear dormer drawings for Hammerwich with Wall roofs — the box across the back slope that turns a low attic into a full-height room, drawn to Lichfield District Council's guidance and the volume limits, delivered in days and revised free until your decision, with a free approval-odds check first.
Lichfield District Council granted 85% of the householder planning decisions it made in its latest published year — 2 points below the 87% England-wide householder average. Hammerwich with Wall contains the Wall conservation area (Wall designated 2018), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901), interwar (1918–1939) and postwar (1945–1970) housing stock sets the design brief on most streets.
The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as Wall those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Hammerwich with Wall is determined against an 8-week statutory target.
Wall (conservation area designated in 2018), Hammerwich (civil parish within Hammerwich with Wall) and Wall (civil parish within Hammerwich with Wall) — these are the Hammerwich with Wall pockets our drawings cover most. Heritage designations here include Wall. Lichfield District Council weighs each proposal against Lichfield District Council's development plan and the design policies it applies to householder applications, where the 1,450 homes here are 58% 1965-1972, 8% pre-1900, 7% 1930-1939, which is what sets the realistic roof and rear-projection options. On roofs the borough is shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over late-1960s and early-1970s houses (58% of 1,450 homes), Victorian and earlier houses (8%) and 1930s semi-detached and detached houses (7%).
Before anything is drawn we check your address against the designations that apply in Hammerwich with Wall: Wall (conservation area designated in 2018). Inside those boundaries permitted development is curtailed and Lichfield District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Hammerwich with Wall takes in Hammerwich and Wall. No Article 4 direction is recorded for Lichfield District Council, but Hammerwich with Wall's 1 conservation area still limit permitted development on those streets.
On stock, Hammerwich with Wall is late-1960s and early-1970s houses (58% of 1,450 homes), Victorian and earlier houses (8%) and 1930s semi-detached and detached houses (7%) — which is why shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Lichfield District Council decided 370 householder applications in the latest published year and granted 85%, with 97% issued inside the eight-week target. That decision record, not a national figure, is what we design to.
The full build-period split for Hammerwich with Wall runs pre-1900 8% (120 homes), 1900-1918 3% (40 homes), 1919-1929 2% (30 homes), 1930-1939 7% (100 homes), 1945-1954 3% (40 homes), 1955-1964 3% (50 homes), 1965-1972 58% (840 homes), 1973-1982 1% (20 homes), 1983-1992 3% (50 homes), 1993-1999 1% (20 homes) and 2000-2008 2% (30 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Lichfield District Council also decides for Alrewas & Fradley, Colton & the Ridwares, Longdon, Mease Valley and Stowe, so a decision in Hammerwich with Wall sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Hammerwich with Wall and Lichfield District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Hammerwich with Wall |
|---|---|
| Dwellings recorded | 1,450 |
| Built pre-1900 | 120 (8%) |
| Built 1900-1918 | 40 (3%) |
| Built 1919-1929 | 30 (2%) |
| Built 1930-1939 | 100 (7%) |
| Built 1945-1954 | 40 (3%) |
| Built 1955-1964 | 50 (3%) |
| Built 1965-1972 | 840 (58%) |
| Built 1973-1982 | 20 (1%) |
| Built 1983-1992 | 50 (3%) |
| Built 1993-1999 | 20 (1%) |
| Built 2000-2008 | 30 (2%) |
| Built before 1919 | 11% |
| Built 1919–1939 | 9% |
| Built 1945–2008 | 72% |
| Conservation areas in Hammerwich with Wall | 1 (Wall) |
| Conservation areas district-wide | 21 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 370 |
| Householder applications granted | 85% |
| Decided within 8 weeks | 97% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Lichfield District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The box dormer is the workhorse loft, and most of Hammerwich with Wall is built for it — the borough runs to late-1960s and early-1970s houses (58% of 1,450 homes), Victorian and earlier houses (8%) and 1930s semi-detached and detached houses (7%) under shallow-pitched roofs and integral garages typical of that period's building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, and a flat-roofed box across the rear slope is the cheapest cubic metre of full-height space those roofs give up. Lichfield District Council tests the dormer against Lichfield District Council's development plan and the design policies it applies to householder applications, and because permitted development turns on a number, the volume you propose against the volume you have left is the first thing an officer or a certificate checks.
That is why the arithmetic goes on the drawings. We calculate the box against the 40- or 50-cubic-metre allowance, count any earlier roof enlargement into the total, hold the flat roof below the ridge and set the face back off the eaves so the dormer reads as subordinate. Hammerwich with Wall contains the Wall conservation area (Wall designated 2018), so materials, fenestration and roof form are assessed against the appraisal, so the cheeks, the window line and the material are drawn to answer it rather than invite a query.
Where Hammerwich with Wall's streets are protected — Wall among them — the Class B dormer right is switched off and even a modest rear box needs consent. No Article 4 direction is recorded for Lichfield District Council, but Hammerwich with Wall's 1 conservation area still limit permitted development on those streets. We confirm the designation before the box is sized.
Many rear dormers in Hammerwich with Wall are permitted development, but the volume and position decide it. You will normally need a full application to Lichfield District Council if any of these apply:
We draw the box within its volume allowance, the flat roof below the ridge and the face set back off the eaves — the three things a dormer stands or falls on — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Lichfield District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Lichfield District Council granted 85% of its householder applications in the year to 31 March 2026, and Wall shapes what is approved here. A dormer is decided on volume and set-back, so a pack that shows the calculation and the eaves detail is cleared faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Wall, Hammerwich and Wall, the dormer that goes through is the subordinate rear box: flat roof kept low, cheeks clad to recede, side windows obscure-glazed against overlooking, and the whole thing set back so the original eaves line still reads from the garden. On shallow-pitched roofs and integral garages typical of that period's building, this returns a full-height double and en-suite from what was standing-room-only, usually inside the permitted-development volume.
The 1,450 homes here are 58% 1965-1972, 8% pre-1900, 7% 1930-1939, which is what sets the realistic roof and rear-projection options. We keep the box off the ridge, match the cheek material to the roof, and where the volume is already spent — or the street is designated — draw the dormer as a householder application composed to Lichfield District Council's roof-alteration guidance rather than push a certificate that would be refused.
We draw rear dormers on the terraced and semi-detached streets across the borough. A few of the neighbourhoods where Hammerwich with Wall dormers come up most often:
Dormer loft drawings for Wall's conservation area designated in 2018 — volume-checked, set-back-detailed and drawn to Lichfield District Council's guidance.
Dormer loft drawings for Hammerwich's civil parish within Hammerwich with Wall — volume-checked, set-back-detailed and drawn to Lichfield District Council's guidance.
Dormer loft drawings for Wall's civil parish within Hammerwich with Wall — volume-checked, set-back-detailed and drawn to Lichfield District Council's guidance.
Whether a dormer in Hammerwich with Wall needs permission comes down to where it sits and how big the box is. This is how the cases compare.
| Dormer type | Permitted development? | What it gains | What Lichfield District Council checks |
|---|---|---|---|
| Rear box, within volume | Usually yes | Full-height room across the back | Volume total, 20cm eaves set-back |
| Rear box, over volume limit | No — full application | A larger room | How far over the allowance, bulk |
| Front or side dormer | No — full application | Light to the front rooms | Visibility from the street, character |
| Dormer in a conservation area | No — full application | Same space, extra scrutiny | Roof form and street appearance |
In conservation areas such as Wall, Class B dormer rights are removed and every dormer needs a full application.
A fixed process built around how Lichfield District Council validates and decides dormer applications — most drawings are submission-ready within seven days of survey.
Send us your Hammerwich with Wall postcode and roof type. We confirm your conservation and Article 4 status, work out how much permitted-development volume you have left, and score your odds against live Lichfield District Council decisions.
We measure ridge and eaves heights, roof pitch and the existing loft floor — the numbers the volume calculation, the set-back and the head heights depend on.
Chartered designers develop the box to your brief, drawn inside the Class B volume limits or, where those are exhausted or removed, to Lichfield District Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Lichfield District Council issues its decision.
Often not. A rear box dormer within 40 cubic metres on a terrace, or 50 on a semi or detached house, set back at least 20 centimetres from the eaves and kept below the ridge, is usually permitted development. In Hammerwich with Wall you will need a full application to Lichfield District Council for a front or side dormer, a box that exceeds the volume, and any dormer in a conservation area such as Wall, where those rights are removed.
The permitted-development limit is a volume, not a footprint: 40 cubic metres of added roof space on a terraced house and 50 on a semi-detached or detached one, and any earlier loft enlargement counts against that total. In Hammerwich with Wall the box must also sit below the ridge and back from the eaves. We measure your roof and calculate the exact volume you have left before drawing. Lichfield District Council is the decision-maker.
Not under permitted development. A dormer on the front roof slope, or one facing a highway, always needs a full application to Lichfield District Council, because it changes how the house reads from the street. Rear box dormers are far more likely to be approved — or to be permitted development outright — which is why almost every Hammerwich with Wall dormer we draw sits on the back slope.
Often, on a terrace or semi. If the dormer or the loft steelwork meets the party wall with your neighbour, the Party Wall etc. Act applies and notice must be served before work starts — separately from Lichfield District Council's planning decision. We flag the party-wall junction on the drawings so a surveyor can be appointed early and the build is not held up. This applies to your Hammerwich with Wall address specifically.
If your dormer is permitted development, a lawful development certificate from Lichfield District Council is council-stamped proof of it — worth holding, because a buyer's solicitor will ask for it when you sell. We prepare and submit the certificate with the same measured drawing pack that shows the box within its volume allowance. This applies to your Hammerwich with Wall address specifically.
We price each Hammerwich with Wall dormer individually, because the roof pitch and the volume left vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Lichfield District Council approves, and we confirm at the outset whether your box is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.