Rear dormer drawings for Bolsover South roofs — the box across the back slope that turns a low attic into a full-height room, drawn to Bolsover District Council's guidance and the volume limits, delivered in days and revised free until your decision, with a free approval-odds check first.
Bolsover District Council granted 98% of the householder planning decisions it made in its latest published year — 11 points above the 87% England-wide householder average. Bolsover South contains the Bolsover conservation area (Bolsover designated 1971), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Bolsover those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Bolsover South is determined against an 8-week statutory target.
Bolsover (conservation area designated in 1971), Old Bolsover (civil parish within Bolsover South) and Scarcliffe (civil parish within Bolsover South) — these are the Bolsover South pockets our drawings cover most. Heritage designations here include Bolsover. Bolsover District Council weighs each proposal against Bolsover District Council's development plan and the design policies it applies to householder applications, where the 2,510 homes here are 33% pre-1900, 12% 1983-1992, 10% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building, over Victorian and earlier houses (33% of 2,510 homes), 1980s estate houses (12%) and late-1950s and early-1960s houses (10%).
Bolsover South's designated heritage is specific, and it is the first thing we check against your address: Bolsover (conservation area designated in 1971). Inside those boundaries permitted development is curtailed and Bolsover District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Bolsover South takes in Old Bolsover and Scarcliffe. No Article 4 direction is recorded for Bolsover District Council, but Bolsover South's 1 conservation area still limit permitted development on those streets.
On stock, Bolsover South is Victorian and earlier houses (33% of 2,510 homes), 1980s estate houses (12%) and late-1950s and early-1960s houses (10%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building govern what a loft or rear projection can realistically be. Bolsover District Council decided 130 householder applications in the latest published year and granted 98%, with 77% issued inside the eight-week target. Those are the numbers our drawings are prepared against.
The full build-period split for Bolsover South runs pre-1900 33% (820 homes), 1900-1918 5% (130 homes), 1919-1929 3% (80 homes), 1930-1939 9% (220 homes), 1945-1954 2% (60 homes), 1955-1964 10% (250 homes), 1965-1972 5% (120 homes), 1973-1982 7% (180 homes), 1983-1992 12% (300 homes), 1993-1999 2% (50 homes) and 2000-2008 4% (110 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Bolsover District Council also decides for Ault Hucknall, Barlborough, Blackwell, Bolsover East, Clowne East, Elmton-with-Creswell, Langwith and Shirebrook South, so a decision in Bolsover South sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Bolsover South and Bolsover District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Bolsover South |
|---|---|
| Dwellings recorded | 2,510 |
| Built pre-1900 | 820 (33%) |
| Built 1900-1918 | 130 (5%) |
| Built 1919-1929 | 80 (3%) |
| Built 1930-1939 | 220 (9%) |
| Built 1945-1954 | 60 (2%) |
| Built 1955-1964 | 250 (10%) |
| Built 1965-1972 | 120 (5%) |
| Built 1973-1982 | 180 (7%) |
| Built 1983-1992 | 300 (12%) |
| Built 1993-1999 | 50 (2%) |
| Built 2000-2008 | 110 (4%) |
| Built before 1919 | 38% |
| Built 1919–1939 | 12% |
| Built 1945–2008 | 43% |
| Conservation areas in Bolsover South | 1 (Bolsover) |
| Conservation areas district-wide | 27 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 130 |
| Householder applications granted | 98% |
| Decided within 8 weeks | 77% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Bolsover District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
The box dormer is the workhorse loft, and most of Bolsover South is built for it — the borough runs to Victorian and earlier houses (33% of 2,510 homes), 1980s estate houses (12%) and late-1950s and early-1960s houses (10%) under steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building, and a flat-roofed box across the rear slope is the cheapest cubic metre of full-height space those roofs give up. Bolsover District Council tests the dormer against Bolsover District Council's development plan and the design policies it applies to householder applications, and because permitted development turns on a number, the volume you propose against the volume you have left is the first thing an officer or a certificate checks.
That is why the arithmetic goes on the drawings. We calculate the box against the 40- or 50-cubic-metre allowance, count any earlier roof enlargement into the total, hold the flat roof below the ridge and set the face back off the eaves so the dormer reads as subordinate. Bolsover South contains the Bolsover conservation area (Bolsover designated 1971), so materials, fenestration and roof form are assessed against the appraisal, so the cheeks, the window line and the material are drawn to answer it rather than invite a query.
Where Bolsover South's streets are protected — Bolsover among them — the Class B dormer right is switched off and even a modest rear box needs consent. No Article 4 direction is recorded for Bolsover District Council, but Bolsover South's 1 conservation area still limit permitted development on those streets. We confirm the designation before the box is sized.
Many rear dormers in Bolsover South are permitted development, but the volume and position decide it. You will normally need a full application to Bolsover District Council if any of these apply:
We draw the box within its volume allowance, the flat roof below the ridge and the face set back off the eaves — the three things a dormer stands or falls on — and submit a validation-complete pack, whether that is a lawful development certificate or a full householder application.
Below is Bolsover District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Bolsover District Council granted 98% of its householder applications in the year to 31 March 2026, and Bolsover shapes what is approved here. A dormer is decided on volume and set-back, so a pack that shows the calculation and the eaves detail is cleared faster and refused less often than a DIY submission.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Bolsover, Old Bolsover and Scarcliffe, the dormer that goes through is the subordinate rear box: flat roof kept low, cheeks clad to recede, side windows obscure-glazed against overlooking, and the whole thing set back so the original eaves line still reads from the garden. On steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, this returns a full-height double and en-suite from what was standing-room-only, usually inside the permitted-development volume.
The 2,510 homes here are 33% pre-1900, 12% 1983-1992, 10% 1955-1964, which is what sets the realistic roof and rear-projection options. We keep the box off the ridge, match the cheek material to the roof, and where the volume is already spent — or the street is designated — draw the dormer as a householder application composed to Bolsover District Council's roof-alteration guidance rather than push a certificate that would be refused.
We draw rear dormers on the terraced and semi-detached streets across the borough. A few of the neighbourhoods where Bolsover South dormers come up most often:
Dormer loft drawings for Bolsover's conservation area designated in 1971 — volume-checked, set-back-detailed and drawn to Bolsover District Council's guidance.
Dormer loft drawings for Old Bolsover's civil parish within Bolsover South — volume-checked, set-back-detailed and drawn to Bolsover District Council's guidance.
Dormer loft drawings for Scarcliffe's civil parish within Bolsover South — volume-checked, set-back-detailed and drawn to Bolsover District Council's guidance.
Whether a dormer in Bolsover South needs permission comes down to where it sits and how big the box is. This is how the cases compare.
| Dormer type | Permitted development? | What it gains | What Bolsover District Council checks |
|---|---|---|---|
| Rear box, within volume | Usually yes | Full-height room across the back | Volume total, 20cm eaves set-back |
| Rear box, over volume limit | No — full application | A larger room | How far over the allowance, bulk |
| Front or side dormer | No — full application | Light to the front rooms | Visibility from the street, character |
| Dormer in a conservation area | No — full application | Same space, extra scrutiny | Roof form and street appearance |
In conservation areas such as Bolsover, Class B dormer rights are removed and every dormer needs a full application.
A fixed process built around how Bolsover District Council validates and decides dormer applications — most drawings are submission-ready within seven days of survey.
Send us your Bolsover South postcode and roof type. We confirm your conservation and Article 4 status, work out how much permitted-development volume you have left, and score your odds against live Bolsover District Council decisions.
We measure ridge and eaves heights, roof pitch and the existing loft floor — the numbers the volume calculation, the set-back and the head heights depend on.
Chartered designers develop the box to your brief, drawn inside the Class B volume limits or, where those are exhausted or removed, to Bolsover District Council's roof-alteration guidance.
We submit the certificate or application, manage validation and case-officer queries, and revise the drawings free until Bolsover District Council issues its decision.
Often not. A rear box dormer within 40 cubic metres on a terrace, or 50 on a semi or detached house, set back at least 20 centimetres from the eaves and kept below the ridge, is usually permitted development. In Bolsover South you will need a full application to Bolsover District Council for a front or side dormer, a box that exceeds the volume, and any dormer in a conservation area such as Bolsover, where those rights are removed.
The permitted-development limit is a volume, not a footprint: 40 cubic metres of added roof space on a terraced house and 50 on a semi-detached or detached one, and any earlier loft enlargement counts against that total. In Bolsover South the box must also sit below the ridge and back from the eaves. We measure your roof and calculate the exact volume you have left before drawing. Bolsover District Council is the decision-maker.
Not under permitted development. A dormer on the front roof slope, or one facing a highway, always needs a full application to Bolsover District Council, because it changes how the house reads from the street. Rear box dormers are far more likely to be approved — or to be permitted development outright — which is why almost every Bolsover South dormer we draw sits on the back slope.
Often, on a terrace or semi. If the dormer or the loft steelwork meets the party wall with your neighbour, the Party Wall etc. Act applies and notice must be served before work starts — separately from Bolsover District Council's planning decision. We flag the party-wall junction on the drawings so a surveyor can be appointed early and the build is not held up. This applies to your Bolsover South address specifically.
If your dormer is permitted development, a lawful development certificate from Bolsover District Council is council-stamped proof of it — worth holding, because a buyer's solicitor will ask for it when you sell. We prepare and submit the certificate with the same measured drawing pack that shows the box within its volume allowance. This applies to your Bolsover South address specifically.
We price each Bolsover South dormer individually, because the roof pitch and the volume left vary house to house, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack with free revisions until Bolsover District Council approves, and we confirm at the outset whether your box is permitted development or needs an application. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.