Full-plans building regulations drawings for Shalford — the technical construction set covering structure, fire safety, insulation and Part L, drawn to satisfy building control so your builder can price and build with certainty, delivered in days and revised free until sign-off, with a free project check first.
Guildford Borough Council granted 86% of the householder planning decisions it made in its latest published year — 1 point below the 87% England-wide householder average. Shalford contains Compton, Littleton, Shalford conservation areas (Compton designated 1971), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901), Edwardian (1901–1910) and postwar (1945–1970) housing stock sets the design brief on most streets.
Before permission is required, Class B allows 40m³ of added loft volume on a terrace and 50m³ on a semi or detached house, and Class A allows a 3m single-storey rear extension on a terrace or 4m on a detached house. In conservation areas such as Compton, Littleton and Shalford those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Shalford is determined against an 8-week statutory target.
Compton (conservation area designated in 1971), Littleton (conservation area designated in 1973), Shalford (conservation area designated in 1973), St Catherines Guildford Town Centre (conservation area designated in 1969), Artington (civil parish within Shalford) and Compton (civil parish within Shalford) — these are the Shalford pockets our drawings cover most. Heritage designations here include Compton, Littleton, Shalford and St Catherines Guildford Town Centre. Guildford Borough Council weighs each proposal against Guildford Borough Council's adopted local plan and its householder design guidance, where the 2,450 homes here are 18% pre-1900, 11% 1955-1964, 11% 1900-1918, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow gabled roofs typical of that period's building, over Victorian and earlier houses (18% of 2,450 homes), late-1950s and early-1960s houses (11%) and Edwardian houses (11%).
What is permitted in Shalford turns on designation first, so that is where we start: Compton (conservation area designated in 1971), Littleton (conservation area designated in 1973), Shalford (conservation area designated in 1973) and St Catherines Guildford Town Centre (conservation area designated in 1969). Inside those boundaries permitted development is curtailed and Guildford Borough Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Shalford takes in Artington and Compton. No Article 4 direction is recorded for Guildford Borough Council, but Shalford's 4 conservation areas still limit permitted development on those streets.
On stock, Shalford is Victorian and earlier houses (18% of 2,450 homes), late-1950s and early-1960s houses (11%) and Edwardian houses (11%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and shallow gabled roofs typical of that period's building govern what a loft or rear projection can realistically be. Guildford Borough Council decided 828 householder applications in the latest published year and granted 86%, with 31% issued inside the eight-week target. We draw to that record rather than to a national average.
The full build-period split for Shalford runs pre-1900 18% (430 homes), 1900-1918 11% (270 homes), 1919-1929 7% (160 homes), 1930-1939 8% (200 homes), 1945-1954 7% (180 homes), 1955-1964 11% (280 homes), 1965-1972 8% (190 homes), 1973-1982 2% (60 homes), 1983-1992 9% (220 homes), 1993-1999 4% (100 homes) and 2000-2008 4% (110 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Guildford Borough Council also decides for Ash Vale, Castle, Clandon & Horsley, Normandy & Pirbright, Pilgrims, Send & Lovelace, Stoke and Tillingbourne, so a decision in Shalford sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Shalford and Guildford Borough Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Shalford |
|---|---|
| Dwellings recorded | 2,450 |
| Built pre-1900 | 430 (18%) |
| Built 1900-1918 | 270 (11%) |
| Built 1919-1929 | 160 (7%) |
| Built 1930-1939 | 200 (8%) |
| Built 1945-1954 | 180 (7%) |
| Built 1955-1964 | 280 (11%) |
| Built 1965-1972 | 190 (8%) |
| Built 1973-1982 | 60 (2%) |
| Built 1983-1992 | 220 (9%) |
| Built 1993-1999 | 100 (4%) |
| Built 2000-2008 | 110 (4%) |
| Built before 1919 | 29% |
| Built 1919–1939 | 15% |
| Built 1945–2008 | 47% |
| Conservation areas in Shalford | 4 (Compton, Littleton…) |
| Conservation areas district-wide | 41 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 828 |
| Householder applications granted | 86% |
| Decided within 8 weeks | 31% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Guildford Borough Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Planning permission decides whether you can build; the Building Regulations decide that what you build is safe, warm and sound. They are two separate approvals, run by different bodies, and a Shalford project usually needs both. The building regulations set is the technical layer beneath the planning drawings — construction sections, structural details, insulation build-ups and fire-safety provisions that a builder works from and a building control surveyor checks against the approved documents.
In practice that means Part A structure — beam and foundation details with the structural calculations behind them; Part B fire — escape, protected routes and, in a loft, a fire door and mains-linked alarms; Part L conservation of fuel and power — U-values, insulation and airtightness; plus drainage, ventilation and stairs. On Shalford's stock, which runs to Victorian and earlier houses (18% of 2,450 homes), late-1950s and early-1960s houses (11%) and Edwardian houses (11%), the recurring challenge is meeting Part L in solid-walled period houses without ruining the room, and we detail the insulation to hit the numbers with the least intrusion.
Building control applies everywhere in Shalford regardless of planning designation, but in conservation areas such as Compton, Littleton, Shalford and St Catherines Guildford Town Centre the two processes interact — insulation and window details often have to satisfy Part L and a planning condition at once. No Article 4 direction is recorded for Guildford Borough Council, but Shalford's 4 conservation areas still limit permitted development on those streets. We draw the construction details to reconcile both.
A full-plans set for Shalford building control is checked against the Approved Documents. A typical extension or loft set covers each of these:
We produce the full-plans construction set — structure, fire, thermal and drainage details with the structural calculations — and submit it to your chosen building control body, whether that is Guildford Borough Council's own team or an approved inspector, so problems are settled on paper before they cost money on site.
Building control is a separate approval, but most Shalford projects clear planning first, so Guildford Borough Council's live decision record below sets the context. Guildford Borough Council granted 86% of its householder applications in the year to 31 March 2026, and Compton shapes what is approved here. We handle both stages, so the construction drawings follow through seamlessly once permission is granted.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
There are two ways to get building control approval, and for anything structural in Shalford we recommend the full-plans route — particularly on the borough's victorian and earlier houses (18% of 2,450 homes) and late-1950s and early-1960s houses (11%), where opening up an old structure tends to reveal surprises. A building notice lets work start with no approved drawings — cheaper up front, but the surveyor rules on compliance as the build proceeds, so a wrong detail is discovered mid-work and rebuilt at your cost. Full plans get the whole set checked and approved before a brick moves, which is what banks, warranty providers and future buyers want to see.
Full plans also protect the project commercially. With approved construction drawings your builder prices exact quantities rather than guessing, and there is a completion certificate at the end — the document a solicitor asks for when you sell across Compton, Littleton and Shalford and the rest of Shalford. Where a project sits in a controlled setting — Shalford contains Compton, Littleton, Shalford conservation areas (Compton designated 1971), so materials, fenestration and roof form are assessed against the appraisal — the construction details also have to respect what planning has conditioned, and we draw the full set and manage the building control submission to reconcile both.
Every structural project needs building regulations drawings whatever the planning position. A few of the Shalford neighbourhoods and property types where we prepare them most often:
Building regulations drawings for Compton's conservation area designated in 1971 — structure, fire and Part L detailed for building control sign-off.
Building regulations drawings for Littleton's conservation area designated in 1973 — structure, fire and Part L detailed for building control sign-off.
Building regulations drawings for Shalford's conservation area designated in 1973 — structure, fire and Part L detailed for building control sign-off.
Building regulations drawings for St Catherines Guildford Town Centre's conservation area designated in 1969 — structure, fire and Part L detailed for building control sign-off.
Building regulations drawings for Artington's civil parish within Shalford — structure, fire and Part L detailed for building control sign-off.
Building regulations drawings for Compton's civil parish within Shalford — structure, fire and Part L detailed for building control sign-off.
They are different approvals and most projects need both. This is how they split in Shalford.
| Planning permission | Building regulations | |
|---|---|---|
| Question it answers | Should this be built here? | Is it built safely and efficiently? |
| Decided by | Guildford Borough Council planning | Building control body or approved inspector |
| Main drawings | Location, block, proposed plans & elevations | Structural, fire, thermal & construction details |
| Needed for permitted development? | No — a certificate is optional | Yes — always, before work starts |
In conservation areas such as Compton and Littleton, a planning condition can dictate materials that the building regulations details must then also satisfy.
A fixed process built around how Shalford projects are approved and inspected — most construction sets are ready within seven days of survey.
Send us your Shalford postcode and scheme. We confirm whether you also need planning, which parts of the regulations apply, and whether Guildford Borough Council building control or an approved inspector suits the job.
We measure the existing structure so the construction details, spans and junctions are drawn to the real building rather than an assumption — the base sound structural calculations depend on.
Chartered designers and engineers produce the full-plans set — structure, fire, Part L thermal, drainage and details — with the structural calculations that support every beam and foundation.
We submit the full-plans application to your building control body, resolve any queries before work starts, and revise the drawings free until the set is approved and the work signed off.
They are two separate approvals. Planning permission, decided by Guildford Borough Council, answers whether a scheme should be built at all — its size, look and impact on neighbours. Building regulations, checked by a building control body, answer whether it is built safely and efficiently — structure, fire, insulation and drainage. A Shalford project usually needs both, and even permitted-development work that skips planning still needs building control sign-off.
Yes — planning permission is not building control approval. The planning drawings show what the building looks like; building regulations drawings show how it is constructed, and no structural work in Shalford can lawfully complete without a building control sign-off. The two sets are drawn together but approved by different bodies, so having one never removes the need for the other. Guildford Borough Council is the decision-maker.
For anything structural in Shalford — a loft, an extension or removing a wall — we recommend full plans. The whole construction set is checked and approved before work starts, so a non-compliant detail is caught on paper rather than rebuilt on site. On the borough's victorian and earlier houses (18% of 2,450 homes) that certainty matters, and a building notice — which lets a surveyor judge compliance as work proceeds — risks costly rework. Banks and warranty providers also prefer the approved full-plans set that Guildford Borough Council or an approved inspector signs off.
Yes. You can use Guildford Borough Council's building control team or an independent approved inspector — both enforce the same regulations, so it comes down to price, availability and continuity. We draw the full-plans set to the same standard either way and submit it to whichever body you choose, then manage the queries and inspections through to the completion certificate. This applies to your Shalford address specifically.
Solid-walled period houses — common across Shalford, including conservation areas such as Compton and Littleton — are the hardest to bring up to Part L without losing room or altering the fabric. We detail the insulation to hit the required U-values with the least intrusion, using internal or roof-level build-ups and, where a planning condition protects the exterior, methods that satisfy both the energy standard and the heritage requirement at once. Guildford Borough Council is the decision-maker.
We price each Shalford job individually, because the structural content and the size of the construction set vary from a single beam to a whole-house refurbishment, and send a fixed, no-obligation quote within one working day. It covers the full-plans drawings and structural calculations with free revisions until sign-off. The building control body's own fee is separate. Call 020 7864 7245 to start. Guildford Borough Council is the decision-maker.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.