MCIAT chartered drawings · Fixed fees across all 33 London boroughs
Services
Areas
Guides
ProcessOur promiseFAQ
Free approval reportGet my free quote020 7864 7245
Annexe and granny flat plans in Melbourne — self-contained accommodation ancillary to a family home
Melbourne · Annexe & Granny Flat Drawings

Annexe and granny flat plans in Melbourne

Annexe and granny-flat drawings for Melbourne homes — designed to stay ancillary to the main house rather than become a separate dwelling, drawn to South Derbyshire District Council's policies, delivered in days and revised free until your decision.

★★★★★ Rated 4.9/5 by London homeowners96% approval rate · 2,400+ drawings delivered
Share

Householder planning in Melbourne — the record

South Derbyshire District Council granted 97% of the householder planning decisions it made in its latest published year — 10 points above the 87% England-wide householder average. Melbourne contains King's Newton, Melbourne, Stanton by Bridge conservation areas (King's Newton designated 1979), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) and postwar (1945–1970) housing stock sets the design brief on most streets.

The permitted-development ceilings are fixed: 40m³ of new roof volume for a terraced loft and 50m³ for a semi or detached house under Class B, plus a 3m single-storey rear extension on a terrace or 4m on a detached house under Class A. In conservation areas such as King's Newton, Melbourne and Stanton by Bridge those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Melbourne is determined against an 8-week statutory target.

King's Newton (conservation area designated in 1979), Melbourne (conservation area designated in 1969), Stanton by Bridge (conservation area designated in 1978), Woodhouses (conservation area designated in 1992) and Stanton by Bridge (civil parish within Melbourne) — these are the Melbourne pockets our drawings cover most. Heritage designations here include King's Newton, Melbourne, Stanton by Bridge and Woodhouses. South Derbyshire District Council weighs each proposal against South Derbyshire District Council's development plan and the design policies it applies to householder applications, where the 2,530 homes here are 23% pre-1900, 11% 1983-1992, 10% 1955-1964, which is what sets the realistic roof and rear-projection options. On roofs the borough is steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building, over Victorian and earlier houses (23% of 2,530 homes), 1980s estate houses (11%) and late-1950s and early-1960s houses (10%).

Melbourne: the local constraints that decide your scheme

Before anything is drawn we check your address against the designations that apply in Melbourne: King's Newton (conservation area designated in 1979), Melbourne (conservation area designated in 1969), Stanton by Bridge (conservation area designated in 1978) and Woodhouses (conservation area designated in 1992). Inside those boundaries permitted development is curtailed and South Derbyshire District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.

Beyond the designated areas, Melbourne takes in Stanton by Bridge. No Article 4 direction is recorded for South Derbyshire District Council, but Melbourne's 4 conservation areas still limit permitted development on those streets.

On stock, Melbourne is Victorian and earlier houses (23% of 2,530 homes), 1980s estate houses (11%) and late-1950s and early-1960s houses (10%) — which is why steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building and trussed-rafter roofs typical of 1980s building govern what a loft or rear projection can realistically be. South Derbyshire District Council decided 273 householder applications in the latest published year and granted 97%, with 61% issued inside the eight-week target. That decision record, not a national figure, is what we design to.

The full build-period split for Melbourne runs pre-1900 23% (570 homes), 1900-1918 6% (150 homes), 1919-1929 3% (80 homes), 1930-1939 4% (100 homes), 1945-1954 3% (70 homes), 1955-1964 10% (250 homes), 1965-1972 7% (180 homes), 1973-1982 8% (210 homes), 1983-1992 11% (280 homes), 1993-1999 7% (170 homes) and 2000-2008 2% (60 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.

South Derbyshire District Council also decides for Aston, Etwall, Repton, Seales and Stenson, so a decision in Melbourne sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.

Melbourne housing stock and council decisions, in figures

Published figures for Melbourne and South Derbyshire District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.

MeasureMelbourne
Dwellings recorded2,530
Built pre-1900570 (23%)
Built 1900-1918150 (6%)
Built 1919-192980 (3%)
Built 1930-1939100 (4%)
Built 1945-195470 (3%)
Built 1955-1964250 (10%)
Built 1965-1972180 (7%)
Built 1973-1982210 (8%)
Built 1983-1992280 (11%)
Built 1993-1999170 (7%)
Built 2000-200860 (2%)
Built before 191928%
Built 1919–19397%
Built 1945–200848%
Conservation areas in Melbourne4 (King's Newton, Melbourne…)
Conservation areas district-wide22
Article 4 directions recorded0
Householder applications decided273
Householder applications granted97%
Decided within 8 weeks61%

Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are South Derbyshire District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.

Ancillary or separate dwelling — the Melbourne test

Councils do not decide annexes on square metres. They decide whether, once built, the accommodation forms part of one planning unit with the main house or a second one beside it. South Derbyshire District Council looks at whether the garden is shared or divided, whether the annexe has its own street access and address, whether the occupier could live there entirely independently, and whether the two households would function as one. That is the whole case, and it is made or lost on the layout.

Melbourne is largely Victorian and earlier houses (23% of 2,530 homes), 1980s estate houses (11%) and late-1950s and early-1960s houses (10%), which shapes the realistic options: converting part of the existing house, extending it, or building a detached unit in the garden. A detached annexe can sometimes sit under Class E as an outbuilding incidental to the enjoyment of the dwellinghouse — but sleeping accommodation is generally not "incidental", so a garden annexe with a bedroom usually needs its own permission rather than relying on outbuilding rights.

In Melbourne's conservation areas — including King's Newton and Melbourne — a garden building is also judged on its effect on the character of the area, which limits height and footprint before the use question is reached. No Article 4 direction is recorded for South Derbyshire District Council, but Melbourne's 4 conservation areas still limit permitted development on those streets.

Annexe accommodation designed for a Melbourne property

When does an annexe need planning permission in Melbourne?

An annexe almost always needs an application to South Derbyshire District Council. Expect one where any of these apply:

  • The accommodation includes sleeping space, so it is not incidental under Class E
  • There is a separate entrance from the street rather than through the shared garden
  • The garden would be divided so each part serves one unit
  • The annexe has its own kitchen, utilities and postal address
  • It would be let, sold or occupied by someone unconnected to the main household
  • The property is on designated land such as King's Newton and Melbourne, where outbuilding rights are curtailed

Melbourne annexe decisions — live from council data

Below is South Derbyshire District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. South Derbyshire District Council granted 97% of its householder applications in the year to 31 March 2026, and King's Newton shapes what is approved here. Annexe applications are decided on use as much as design, so the supporting case matters as much as the elevations.

Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.

97%householder applications approved in South Derbyshire
87%national average — South Derbyshire is 10 points above the national average

Ready for drawings your council will approve?

Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.

Get your free fixed quote

60 seconds now. A fixed, no-obligation quote back within one working day — and we'll tell you if you don't even need planning.

No obligation · No spam · Reply within 1 working day

What annexes get approved across Melbourne

Across King's Newton, Melbourne and Stanton by Bridge, the annexes that succeed keep one shared garden, take access past the main house rather than from the street, and are modest against the host building — single storey where the plot is overlooked, and set back from boundaries. On victorian and earlier houses (23% of 2,530 homes), converting an integral garage or a rear ground floor is often approved more readily than a detached garden unit, because the ancillary relationship is self-evident.

Melbourne contains King's Newton, Melbourne, Stanton by Bridge conservation areas (King's Newton designated 1979), so materials, fenestration and roof form are assessed against the appraisal. Where South Derbyshire District Council grants permission, it commonly attaches a condition tying occupation of the annexe to the main dwelling. That condition is not a problem to be avoided — it is usually the mechanism that makes approval possible, and we draft the application on that basis rather than pretending the annexe is something it is not.

Annexe drawing pack prepared for a Melbourne application

Annexe and granny flat drawings across Melbourne

We draw annexes across Melbourne. A few of the areas where multigenerational schemes come up most often:

King's Newton

Annexe and granny-flat drawings for King's Newton — conservation area designated in 1979 — planned to stay ancillary and drawn to South Derbyshire District Council's policies.

Melbourne

Annexe and granny-flat drawings for Melbourne — conservation area designated in 1969 — planned to stay ancillary and drawn to South Derbyshire District Council's policies.

Stanton by Bridge

Annexe and granny-flat drawings for Stanton by Bridge — conservation area designated in 1978 — planned to stay ancillary and drawn to South Derbyshire District Council's policies.

Woodhouses

Annexe and granny-flat drawings for Woodhouses — conservation area designated in 1992 — planned to stay ancillary and drawn to South Derbyshire District Council's policies.

Stanton by Bridge

Annexe and granny-flat drawings for Stanton by Bridge — civil parish within Melbourne — planned to stay ancillary and drawn to South Derbyshire District Council's policies.

Annexe, outbuilding or new dwelling in Melbourne?

Three similar buildings, three different consents. This is what separates them.

What you buildPlanning statusKey testWhat South Derbyshire District Council checks
Garden room, no sleeping spaceOften Class E permitted developmentIncidental to the houseHeight, footprint, boundary position
Annexe used by the householdFull application, usually with a tie conditionAncillary useShared garden and access, layout
Self-contained unit, own accessNew dwelling — full applicationSeparate planning unitPolicy on new homes, amenity, parking
Converted garage or ground floorOften permitted, use still assessedWhether use changesIndependence of the accommodation
Annexe on designated landFull applicationDesignationCharacter and appearance

The ancillary/separate-dwelling distinction comes from section 55 of the Town and Country Planning Act 1990; outbuilding limits from the GPDO 2015, Schedule 2, Part 1, Class E.

Four steps to an approved Melbourne annexe

A fixed process built around how South Derbyshire District Council tests the use question as well as the design.

  1. 1

    Free approval check

    Tell us who the annexe is for and where it would sit on the plot. We confirm designation status and tell you honestly whether the scheme reads as ancillary or as a separate dwelling in Melbourne.

  2. 2

    Measured survey

    We measure the plot, the existing house and the access route, so the shared-garden and shared-access case can be drawn rather than asserted.

  3. 3

    Annexe design & drawings

    Chartered designers develop the annexe to your brief, with the layout, access and garden relationship arranged to support the ancillary case under South Derbyshire District Council's policies.

  4. 4

    Submission & follow-through

    We submit the application with a supporting statement on use, manage validation and case-officer queries, and revise free until South Derbyshire District Council decides.

Frequently asked questions

Do I need planning permission for an annexe in Melbourne?

Almost always. Sleeping accommodation is generally not "incidental" to the enjoyment of a house, so it falls outside the outbuilding permitted-development right, and any annexe that could function independently raises a change-of-use question under section 55. In Melbourne we prepare a full application to South Derbyshire District Council and make the ancillary case explicitly rather than hoping it is not asked.

What makes an annexe ancillary rather than a separate dwelling in Melbourne?

A shared garden rather than a divided one, access through the main property rather than a separate street entrance, occupation by a member of the same household, and a physical and functional relationship with the main house. South Derbyshire District Council weighs those together — no single feature decides it, but a separate front door and a fenced-off garden together usually settle it against you. This applies to your Melbourne address specifically.

Can I build a granny flat in the garden in Melbourne?

Yes, subject to permission. A detached garden annexe is assessed on its scale against the plot, its effect on neighbours and the character of the area, and then on the use question. Keeping it single storey, set in from boundaries and served off the shared garden gives it the best prospect in Melbourne, particularly near designated areas such as King's Newton and Melbourne. South Derbyshire District Council is the decision-maker.

Will South Derbyshire District Council attach conditions to an annexe permission?

Commonly, yes — a condition tying occupation of the annexe to the main dwelling, so it cannot be sold or let separately. That is normally what makes approval possible, because it removes the concern that a new independent home is being created without going through housing policy. The condition runs with the land, so it matters at resale, and we explain the implications before you commit. This applies to your Melbourne address specifically. South Derbyshire District Council is the decision-maker.

Does an annexe need building regulations approval in Melbourne?

Yes. A new annexe is new habitable accommodation, so structure, fire escape, insulation and ventilation all apply, and a detached annexe close to a boundary raises fire-spread requirements as well. Planning and building control are separate consents with separate submissions — we prepare both so the approved design is the one that can actually be built. This applies to your Melbourne address specifically. South Derbyshire District Council is the decision-maker.

How long does an annexe application take in Melbourne?

A householder application runs to an eight-week statutory target; where the council treats the annexe as creating a new unit it becomes a minor application with a thirteen-week target instead. Which route applies depends on how the use is characterised, which is precisely why the ancillary case is worth making properly at the outset. This applies to your Melbourne address specifically. South Derbyshire District Council is the decision-maker.

How much do annexe plans in Melbourne cost?

We quote each Melbourne annexe individually, because plot, access and whether you are converting or building new all change the work, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack and supporting statement, with free revisions until South Derbyshire District Council approves. Call 020 7864 7245 to start.

Planning approval report

Know your approval odds before you spend a penny on drawings

Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.

Annexe and granny flat plans across South Derbyshire

Same fixed quotes, same fast drawings — wherever your project is.

Other planning services in Melbourne