Annexe and granny-flat drawings for Arlington homes — designed to stay ancillary to the main house rather than become a separate dwelling, drawn to Wealden District Council's policies, delivered in days and revised free until your decision.
Wealden District Council granted 88% of the householder planning decisions it made in its latest published year — 1 point above the 87% England-wide householder average. Arlington contains Arlington Conservation Area, Chalvington Conservation Area, Ripe Conservation Area conservation areas (Arlington Conservation Area designated 2017), so materials, fenestration and roof form are assessed against the appraisal, which is where a policy-literate drawing pack earns its keep. Its dominant Victorian (1837–1901) housing stock sets the design brief on most streets.
Under Class B, a rear dormer stays permitted development up to 40m³ of added roof volume on a terrace or 50m³ on a semi-detached or detached house, while Class A allows a single-storey rear extension of 3m beyond the original rear wall on a terrace and 4m on a detached house before a full application is needed. In conservation areas such as Arlington Conservation Area, Chalvington Conservation Area and Ripe Conservation Area those rights are removed, so we confirm your exact address before a line is drawn. A validated householder application in Arlington is determined against an 8-week statutory target.
Arlington (conservation area designated in 2017), Chalvington (conservation area designated in 2017), Ripe (conservation area designated in 2017), Selmeston (conservation area designated in 2017), Laughton (civil parish within Arlington), Alciston (civil parish within Arlington), Berwick (civil parish within Arlington), Selmeston (civil parish within Arlington) and Chalvington with Ripe (civil parish within Arlington) — these are the Arlington pockets our drawings cover most. Heritage designations here include Arlington Conservation Area, Chalvington Conservation Area, Ripe Conservation Area and Selmeston Conservation Area. Wealden District Council weighs each proposal against Wealden District Council's adopted local plan and its householder design guidance, where the 1,150 homes here are 33% 1993-1999, 29% pre-1900, 6% 2000-2008, which is what sets the realistic roof and rear-projection options. On roofs the borough is trussed-rafter roofs typical of 1990s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building, over 1990s estate houses (33% of 1,150 homes), Victorian and earlier houses (29%) and 2000s houses and apartments (6%).
Arlington's designated heritage is specific, and it is the first thing we check against your address: Arlington (conservation area designated in 2017), Chalvington (conservation area designated in 2017), Ripe (conservation area designated in 2017) and Selmeston (conservation area designated in 2017). Inside those boundaries permitted development is curtailed and Wealden District Council assesses materials, window detail and roof form against the area's own appraisal, so a scheme that would be waved through two streets away can need a full application here.
Beyond the designated areas, Arlington takes in Laughton, Alciston, Berwick, Selmeston and Chalvington with Ripe. No Article 4 direction is recorded for Wealden District Council, but Arlington's 4 conservation areas still limit permitted development on those streets.
On stock, Arlington is 1990s estate houses (33% of 1,150 homes), Victorian and earlier houses (29%) and 2000s houses and apartments (6%) — which is why trussed-rafter roofs typical of 1990s building and steeply pitched slate roofs, valley gutters and party parapets typical of pre-1900 building govern what a loft or rear projection can realistically be. Wealden District Council decided 721 householder applications in the latest published year and granted 88%, with 69% issued inside the eight-week target. Those are the numbers our drawings are prepared against.
The full build-period split for Arlington runs pre-1900 29% (330 homes), 1900-1918 3% (40 homes), 1919-1929 2% (20 homes), 1930-1939 4% (50 homes), 1945-1954 3% (40 homes), 1955-1964 2% (20 homes), 1965-1972 3% (40 homes), 1973-1982 3% (40 homes), 1983-1992 2% (20 homes), 1993-1999 33% (380 homes) and 2000-2008 6% (70 homes). That distribution is why pre-1900 detailing dominates the drawings here, and it is measured from council-tax records rather than assumed from the street name.
Wealden District Council also decides for Crowborough North, Danehill & Fletching, Frant & Wadhurst, Hailsham Central, Hartfield, Hellingly, Horam & Punnetts Town and Mayfield & Five Ashes, so a decision in Arlington sits inside a wider pattern of decisions we track across the same authority — useful when an officer cites a precedent from the next area over.
Published figures for Arlington and Wealden District Council. These are the numbers that decide what is realistic on your street, so we work from them rather than from national averages.
| Measure | Arlington |
|---|---|
| Dwellings recorded | 1,150 |
| Built pre-1900 | 330 (29%) |
| Built 1900-1918 | 40 (3%) |
| Built 1919-1929 | 20 (2%) |
| Built 1930-1939 | 50 (4%) |
| Built 1945-1954 | 40 (3%) |
| Built 1955-1964 | 20 (2%) |
| Built 1965-1972 | 40 (3%) |
| Built 1973-1982 | 40 (3%) |
| Built 1983-1992 | 20 (2%) |
| Built 1993-1999 | 380 (33%) |
| Built 2000-2008 | 70 (6%) |
| Built before 1919 | 32% |
| Built 1919–1939 | 6% |
| Built 1945–2008 | 53% |
| Conservation areas in Arlington | 4 (Arlington Conservation Area, Chalvington Conservation Area…) |
| Conservation areas district-wide | 33 |
| Article 4 directions recorded | 0 |
| Householder applications decided | 721 |
| Householder applications granted | 88% |
| Decided within 8 weeks | 69% |
Dwelling stock from VOA council-tax data at 31 March 2025; conservation-area and Article 4 counts from planning.data.gov.uk (MHCLG); decision figures are Wealden District Council's own, from MHCLG live table PS2 for the year to 31 March 2026.
Councils do not decide annexes on square metres. They decide whether, once built, the accommodation forms part of one planning unit with the main house or a second one beside it. Wealden District Council looks at whether the garden is shared or divided, whether the annexe has its own street access and address, whether the occupier could live there entirely independently, and whether the two households would function as one. That is the whole case, and it is made or lost on the layout.
Arlington is largely 1990s estate houses (33% of 1,150 homes), Victorian and earlier houses (29%) and 2000s houses and apartments (6%), which shapes the realistic options: converting part of the existing house, extending it, or building a detached unit in the garden. A detached annexe can sometimes sit under Class E as an outbuilding incidental to the enjoyment of the dwellinghouse — but sleeping accommodation is generally not "incidental", so a garden annexe with a bedroom usually needs its own permission rather than relying on outbuilding rights.
In Arlington's conservation areas — including Arlington Conservation Area and Chalvington Conservation Area — a garden building is also judged on its effect on the character of the area, which limits height and footprint before the use question is reached. No Article 4 direction is recorded for Wealden District Council, but Arlington's 4 conservation areas still limit permitted development on those streets.
An annexe almost always needs an application to Wealden District Council. Expect one where any of these apply:
We plan the annexe so its relationship to the main house is visible on the page — shared garden, connected access, a layout that reads as one household — and set out the case Wealden District Council has to test, rather than leaving the officer to assume the worst.
Below is Wealden District Council's real householder decision record, drawn from official planning statistics and refreshed as new data lands. Wealden District Council granted 88% of its householder applications in the year to 31 March 2026, and Arlington Conservation Area shapes what is approved here. Annexe applications are decided on use as much as design, so the supporting case matters as much as the elevations.
Source: MHCLG planning application statistics (householder decisions, England, 1 April 2025 - 31 March 2026). Compare every borough on our London approval-rate league table.
Tell us about your project and get a fixed, no-obligation quote back within one working day. If you don't need planning permission at all, we'll tell you that too — for free.
Across Arlington, Chalvington and Ripe, the annexes that succeed keep one shared garden, take access past the main house rather than from the street, and are modest against the host building — single storey where the plot is overlooked, and set back from boundaries. On 1990s estate houses (33% of 1,150 homes), converting an integral garage or a rear ground floor is often approved more readily than a detached garden unit, because the ancillary relationship is self-evident.
Arlington contains Arlington Conservation Area, Chalvington Conservation Area, Ripe Conservation Area conservation areas (Arlington Conservation Area designated 2017), so materials, fenestration and roof form are assessed against the appraisal. Where Wealden District Council grants permission, it commonly attaches a condition tying occupation of the annexe to the main dwelling. That condition is not a problem to be avoided — it is usually the mechanism that makes approval possible, and we draft the application on that basis rather than pretending the annexe is something it is not.
We draw annexes across Arlington. A few of the areas where multigenerational schemes come up most often:
Annexe and granny-flat drawings for Arlington — conservation area designated in 2017 — planned to stay ancillary and drawn to Wealden District Council's policies.
Annexe and granny-flat drawings for Chalvington — conservation area designated in 2017 — planned to stay ancillary and drawn to Wealden District Council's policies.
Annexe and granny-flat drawings for Ripe — conservation area designated in 2017 — planned to stay ancillary and drawn to Wealden District Council's policies.
Annexe and granny-flat drawings for Selmeston — conservation area designated in 2017 — planned to stay ancillary and drawn to Wealden District Council's policies.
Annexe and granny-flat drawings for Laughton — civil parish within Arlington — planned to stay ancillary and drawn to Wealden District Council's policies.
Annexe and granny-flat drawings for Alciston — civil parish within Arlington — planned to stay ancillary and drawn to Wealden District Council's policies.
Three similar buildings, three different consents. This is what separates them.
| What you build | Planning status | Key test | What Wealden District Council checks |
|---|---|---|---|
| Garden room, no sleeping space | Often Class E permitted development | Incidental to the house | Height, footprint, boundary position |
| Annexe used by the household | Full application, usually with a tie condition | Ancillary use | Shared garden and access, layout |
| Self-contained unit, own access | New dwelling — full application | Separate planning unit | Policy on new homes, amenity, parking |
| Converted garage or ground floor | Often permitted, use still assessed | Whether use changes | Independence of the accommodation |
| Annexe on designated land | Full application | Designation | Character and appearance |
The ancillary/separate-dwelling distinction comes from section 55 of the Town and Country Planning Act 1990; outbuilding limits from the GPDO 2015, Schedule 2, Part 1, Class E.
A fixed process built around how Wealden District Council tests the use question as well as the design.
Tell us who the annexe is for and where it would sit on the plot. We confirm designation status and tell you honestly whether the scheme reads as ancillary or as a separate dwelling in Arlington.
We measure the plot, the existing house and the access route, so the shared-garden and shared-access case can be drawn rather than asserted.
Chartered designers develop the annexe to your brief, with the layout, access and garden relationship arranged to support the ancillary case under Wealden District Council's policies.
We submit the application with a supporting statement on use, manage validation and case-officer queries, and revise free until Wealden District Council decides.
Almost always. Sleeping accommodation is generally not "incidental" to the enjoyment of a house, so it falls outside the outbuilding permitted-development right, and any annexe that could function independently raises a change-of-use question under section 55. In Arlington we prepare a full application to Wealden District Council and make the ancillary case explicitly rather than hoping it is not asked.
A shared garden rather than a divided one, access through the main property rather than a separate street entrance, occupation by a member of the same household, and a physical and functional relationship with the main house. Wealden District Council weighs those together — no single feature decides it, but a separate front door and a fenced-off garden together usually settle it against you. This applies to your Arlington address specifically.
Yes, subject to permission. A detached garden annexe is assessed on its scale against the plot, its effect on neighbours and the character of the area, and then on the use question. Keeping it single storey, set in from boundaries and served off the shared garden gives it the best prospect in Arlington, particularly near designated areas such as Arlington Conservation Area and Chalvington Conservation Area. Wealden District Council is the decision-maker.
Commonly, yes — a condition tying occupation of the annexe to the main dwelling, so it cannot be sold or let separately. That is normally what makes approval possible, because it removes the concern that a new independent home is being created without going through housing policy. The condition runs with the land, so it matters at resale, and we explain the implications before you commit. This applies to your Arlington address specifically. Wealden District Council is the decision-maker.
Yes. A new annexe is new habitable accommodation, so structure, fire escape, insulation and ventilation all apply, and a detached annexe close to a boundary raises fire-spread requirements as well. Planning and building control are separate consents with separate submissions — we prepare both so the approved design is the one that can actually be built. This applies to your Arlington address specifically. Wealden District Council is the decision-maker.
A householder application runs to an eight-week statutory target; where the council treats the annexe as creating a new unit it becomes a minor application with a thirteen-week target instead. Which route applies depends on how the use is characterised, which is precisely why the ancillary case is worth making properly at the outset. This applies to your Arlington address specifically. Wealden District Council is the decision-maker.
We quote each Arlington annexe individually, because plot, access and whether you are converting or building new all change the work, and send a fixed, no-obligation quote within one working day. It covers the full drawing pack and supporting statement, with free revisions until Wealden District Council approves. Call 020 7864 7245 to start.
Answer five quick questions and get a free planning score for your exact address — instantly. Then, if you want the full picture, unlock the detailed analysis: your council's live approval rates, local precedents, constraints on your street and a step-by-step route to permission.
Same fixed quotes, same fast drawings — wherever your project is.